CPE: Novel method to shorten the lead time for laser micro-machining

Serap Çelen

doi:10.3139/120.110751

Article

CPE: Novel method to shorten the lead time for laser micro-machining

Serap Çelen

Published/Copyright: May 15, 2015

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Materials Testing Volume 57 Issue 6

Abstract

Conceptual profit engines method is a novel design approach to shorten preparation and manufacturing times from the perspective of enterprise objectives. It illustrates conceptual steps of design operation for knowledge-based laser micro-machining information system and provides new insights into decision-making systems with reducing human interaction. This method facilitated laser micro-machining by setting unknown parameters, and it reduced the process time to 47 % with actively reducing operations preventing complex decisions.

Kurzfassung

Der Zweck des vorliegenden Beitrages besteht darin, einen Vorschlag zur Reduzierung der Vorbereitungszeit für die Laser-Mikromaterialbearbeitung zu unterbreiten, in dem ein neues Prozessdesign zur Anwendung kommt, das als konzeptueller Profitmotor (Conceptual Profit Engine (CPE)) bezeichnet wird. CPE ist ein neuartiger Designansatz, der dazu dient, die Vorbereitungs- und die Produktionszeiten vom Standpunkt der industriellen Wettbewerbsfähigkeit her zu verkürzen. Aus der Perspektive der Unternehmensziele ist es entscheidend, dass CPE zeigt, wie konzeptuelle Schritte der Designoperation die Entwicklung wissensbasierter Informationssysteme zur Laser-Mikromaterialbearbeitung unterstützen können und neue Einblicke in die entscheidungsfindenden Systeme unter Reduktion der menschlichen Eingriffe erbringen können. Dieses Verfahren kann menschliche Prozesse zur Entscheidungsfindung durch Setzen unbekannter Parameter erleichternn, und verminderte in dieser Studiet die Prozesszeit durch aktive Reduktionsoperationen unter Vermeidung komplexer Entscheidungen um 47 %.

§Correspondence Address, Dr. Serap Çelen, Mechanical Engineering Department, Faculty of EngineeringEge University, Bornova, Izmir, 35030, Turkey. E-mail: seracelen@hotmail.com

Serap Çelen received the BSc degree in Mechanical Engineering from the Dokuz Eylul University, Izmir, Turkey in 2003. At the same year, she started her academic career in the Mechanical Engineering Department of Ege University, Izmir, Turkey. In 2006, she earned her Master degree from Graduate School of Natural and Applied Science, Dokuz Eylul University. She completed her PhD at the Graduate School of Natural and Applied Science, Ege University in 2011. She is a member of European Laser Institute, European Optical Society and SPIE. Her research includes the areas of laser material interactions, laser welding, and laser surface modifications.

References

1 SmithA.: An Inquiry into the Nature and Causes of the Wealth of Nations, W. Strahan and T. C. Adell Publishing, UK (1776)10.1093/oseo/instance.00043218Search in Google Scholar

2 BabbageC.: On the Economy of Machinery and Manufactures, Charles Knight, London, UK (1832)10.5479/sil.975430.39088015716483Search in Google Scholar

3 BuffaE. S.: Modern Production/Operations Management, 6^th Ed., Wiley Publishing, USA (1980)Search in Google Scholar

4 BachmannF.: High power laser sources for industry and their applications, PanchenkoV., GolubevV., IoninA., ChumakovA. (Eds.): Proc. of the Intern. Conf. on Lasers, Applications, and Technologies, High-Power Lasers and Applications, SPIE, 6735, 67350T, UK (2007), pp. 1–1310.1117/12.753214Search in Google Scholar

5 ChenW., HoyleC., WassenaarH. J.: Decision-Based Design Framework, Decision-Based Design, Springer Verlag, Berlin, Germany (2013)10.1007/978-1-4471-4036-8_4Search in Google Scholar

6 MorrowW. R., LongM., MacDonaldE. F.: Consider-then-choose models in decision-based design optimization, Proc. of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, Illinois, USA, (2012), pp. 405–42210.1115/DETC2012-71176Search in Google Scholar

7 LuS. C. Y., CaiJ., BurkettW., UdwadiaF.: A methodology for collaborative design process and conflict analysis, Annals of the CIRP49 (2000), No. 1, pp. 69–7310.1016/S0007-8506(07)62898-4Search in Google Scholar

8 PetersJ., KrauseK. L., AgermanE.: Design: An integrated approach, Annals of CIRP39 (1990), No. 2, pp. 599–60710.1016/S0007-8506(07)62997-7Search in Google Scholar

9 VenkatachalamA. R., MellicampJ. M., MillerD. M.: A knowledge-based approach to design for manufacturability, Journal of Intelligent Manufacturing4 (1993), No. 5, pp. 355–36610.1007/BF00123780Search in Google Scholar

10 MorostoriL., VanezaJ., KumaraS. R. T.: Agent-based systems for manufacturing, CIRP Annals – Manufacturing Technology55 (2006), No. 2, pp. 697–72010.1016/j.cirp.2006.10.004Search in Google Scholar

11 BaralC., SubrahmanianV. S.: Dualities between alternative semantics for logic programming and non-monotonic reasoning, NerodeA., MarekW., SubrahmanianC. S. (Eds.): Logic Programming and Non-Monotonic Reasoning, MIT Press, Cambridge, MA, USA (1991), pp. 69–8610.1007/BF00881799Search in Google Scholar

12 NakaoM., YamadaS., KuwabaraM., OtuboM., HatamuraY.: Decision-based process design for shortening the lead time for mold design and production, CIRP Annals – Manufacturing Technology51 (2002), No. 1, pp. 127–13010.1016/S0007-8506(07)61482-6Search in Google Scholar

13 ÇelenS.: A novel strain energy density algorithm for laser-induced micro-hollows, Optics and Lasers in Engineering70 (2015), pp. 45–5010.1016/j.optlaseng.2015.02.002Search in Google Scholar

14 ÇelenS., OzdenH.: Laser-induced novel patterns: As smart strain actuators for new-age dental implant surfaces, Appl. Surf. Sci. (2012), 263, pp. 579–58510.1016/j.apsusc.2012.09.112Search in Google Scholar

Published Online: 2015-05-15

Published in Print: 2015-06-01

You are currently not able to access this content.

Articles in the same Issue

https://doi.org/10.3139/120.110751