Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Model Development for an Internal Mixer
-
K. Meissner
Veröffentlicht/Copyright:
27. Mai 2013
Abstract
Using the relevance and importance modelling the mixing process in an internal mixer as a starting point, the physically based modelling of the mixing process will be discussed. There are three essential aspects of model development, i.e. the geometric model, the selection of relevant rheological properties and the establishing of relevant balance equation terms. Various models will be discussed and evaluated on the basis of literature and our own work.
The calculated field quantities can be used to determine the internal mixer's action quantities (e.g. deformative mixing effect, dispersing effect, thermomechanical load etc.) and to set up suitable working diagrams.
Received: 1990-12-20
Accepted: 1991-6-5
Published Online: 2013-05-27
Published in Print: 1992-03-01
© 1992, Carl Hanser Verlag, Munich
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Contents
- Contents
- Internal and Continuous Mixers
- Model Development for an Internal Mixer
- Simulation of Flow in a Farrel Continuous Mixer
- Extrusion
- Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h
- Conveying and Melting in Screw Extruders with Axial Screw Movement
- Thermo-viscous Effects in Extrusion of Planar Jets with Solidification
- Film
- Dynamics and Stability of Double Bubble Tubular Film Extrusion
- Melt Strength Behavior of Polyethylene Blends**
- Optical Properties and Orientation Development in Uniaxially Stretched Syndiotactic Polystyrene from Amorphous Precursors
- Molding
- Thermoviscoelastic Calculation of Residual Stresses and Residual Shapes of Injection Molded Parts**
- Analysis and Simulation of Structural Reaction Injection Molding (SRIM)
- Crystal Orientation in Injection Moldings of Flaky Filler-Filled Polypropylenes
- Erratum
- Molecular Orientation in Injection-molded Polypropylene Copolymers with Ethylene
Artikel in diesem Heft
- Contents
- Contents
- Internal and Continuous Mixers
- Model Development for an Internal Mixer
- Simulation of Flow in a Farrel Continuous Mixer
- Extrusion
- Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h
- Conveying and Melting in Screw Extruders with Axial Screw Movement
- Thermo-viscous Effects in Extrusion of Planar Jets with Solidification
- Film
- Dynamics and Stability of Double Bubble Tubular Film Extrusion
- Melt Strength Behavior of Polyethylene Blends**
- Optical Properties and Orientation Development in Uniaxially Stretched Syndiotactic Polystyrene from Amorphous Precursors
- Molding
- Thermoviscoelastic Calculation of Residual Stresses and Residual Shapes of Injection Molded Parts**
- Analysis and Simulation of Structural Reaction Injection Molding (SRIM)
- Crystal Orientation in Injection Moldings of Flaky Filler-Filled Polypropylenes
- Erratum
- Molecular Orientation in Injection-molded Polypropylene Copolymers with Ethylene
