Home Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h
Article
Licensed
Unlicensed Requires Authentication

Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h

  • F. Hensen , W. Imping and G. Stausberg
Published/Copyright: May 27, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 7 Issue 1

Abstract

A summary of recent technological developments related to large diameter screw extruders is presented. Special attention is given to cascade screw extruders.

* Mail address: Prof. Dr. -Ing. F. Hensen, Barmag AG, Leverkuser Straße 65, P.O. Box 110240, 5630 Remscheid-Lennep, Germany.
Received: 1991-4-22
Accepted: 1991-10-16
Published Online: 2013-05-27
Published in Print: 1992-03-01

© 1992, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Internal and Continuous Mixers
  4. Model Development for an Internal Mixer
  5. Simulation of Flow in a Farrel Continuous Mixer
  6. Extrusion
  7. Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h
  8. Conveying and Melting in Screw Extruders with Axial Screw Movement
  9. Thermo-viscous Effects in Extrusion of Planar Jets with Solidification
  10. Film
  11. Dynamics and Stability of Double Bubble Tubular Film Extrusion
  12. Melt Strength Behavior of Polyethylene Blends**
  13. Optical Properties and Orientation Development in Uniaxially Stretched Syndiotactic Polystyrene from Amorphous Precursors
  14. Molding
  15. Thermoviscoelastic Calculation of Residual Stresses and Residual Shapes of Injection Molded Parts**
  16. Analysis and Simulation of Structural Reaction Injection Molding (SRIM)
  17. Crystal Orientation in Injection Moldings of Flaky Filler-Filled Polypropylenes
  18. Erratum
  19. Molecular Orientation in Injection-molded Polypropylene Copolymers with Ethylene
https://doi.org/10.3139/217.920020

Articles in the same Issue

  1. Contents
  2. Contents
  3. Internal and Continuous Mixers
  4. Model Development for an Internal Mixer
  5. Simulation of Flow in a Farrel Continuous Mixer
  6. Extrusion
  7. Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h
  8. Conveying and Melting in Screw Extruders with Axial Screw Movement
  9. Thermo-viscous Effects in Extrusion of Planar Jets with Solidification
  10. Film
  11. Dynamics and Stability of Double Bubble Tubular Film Extrusion
  12. Melt Strength Behavior of Polyethylene Blends**
  13. Optical Properties and Orientation Development in Uniaxially Stretched Syndiotactic Polystyrene from Amorphous Precursors
  14. Molding
  15. Thermoviscoelastic Calculation of Residual Stresses and Residual Shapes of Injection Molded Parts**
  16. Analysis and Simulation of Structural Reaction Injection Molding (SRIM)
  17. Crystal Orientation in Injection Moldings of Flaky Filler-Filled Polypropylenes
  18. Erratum
  19. Molecular Orientation in Injection-molded Polypropylene Copolymers with Ethylene
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 19.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.920020/html
Scroll to top button