Investigation of Design Parameters and Novel Design of Petaloid PET Bottles
-
M.-Y. Lyu
Abstract
Carbonated soft drink (CSD) Poly(ethylene terephthalate) (PET) bottle contains pressurized liquid and its bottom design is petaloid in shape for self-standing. The trouble in this bottle is bottom cracking. In this study the design parameters of the petaloid bottom of the PET bottle have been investigated. Cracking test has been performed for different shapes of petaloid bottles and for several sizes of bottles, too. Through the cracking test, it has been concluded that the design parameters that affect the crack generation are clearance, foot length and valley width in the petaloid bottom. Computer simulation has been performed to seek for the optimum values of the design parameters that can reduce maximum principal stress concentration. Consequently the novel design of the petaloid bottom has been completed.
© 2002, Carl Hanser Verlag, Munich
Artikel in diesem Heft
- Editorial
- Touchstones of Polymer Processing
- Twin Screw Extrusion and Compounding
- Residence Time Distribution Curves of Screw Elements in Twin-Srew Extruder
- Rheological Effect of Zinc Surfactant on the TESPT-Silica Mixture in NR and S-SBR Compounds
- Optimization of Processing Conditions for Polymer Twin-Screw Extrusion
- Fibers and Film
- The Prediction of Sharkskin Instability Observed during Film Blowing
- Tensile Strength Characteristics of Polymer Melts
- Biaxially Oriented PP Films Using the Double Bubble Process
- Fiber and Film
- Crystallization and Orientation Development in Melt Spinning Isotactic PP of Varying Tacticity
- Extrusion Coating
- Extrusion Coating with Metallocene-Catalysed Polyethylenes
- Injection Molding
- Design Sensitivity Analysis Applied to Injection Molding for Optimization of Gate Location and Injection Pressure
- Three-dimensional Numerical Modeling of Co-injection Molding
- Residual Stress and Warpage Models for Complex Injection Molded Parts
- Blow Molding
- Investigation of Design Parameters and Novel Design of Petaloid PET Bottles
Artikel in diesem Heft
- Editorial
- Touchstones of Polymer Processing
- Twin Screw Extrusion and Compounding
- Residence Time Distribution Curves of Screw Elements in Twin-Srew Extruder
- Rheological Effect of Zinc Surfactant on the TESPT-Silica Mixture in NR and S-SBR Compounds
- Optimization of Processing Conditions for Polymer Twin-Screw Extrusion
- Fibers and Film
- The Prediction of Sharkskin Instability Observed during Film Blowing
- Tensile Strength Characteristics of Polymer Melts
- Biaxially Oriented PP Films Using the Double Bubble Process
- Fiber and Film
- Crystallization and Orientation Development in Melt Spinning Isotactic PP of Varying Tacticity
- Extrusion Coating
- Extrusion Coating with Metallocene-Catalysed Polyethylenes
- Injection Molding
- Design Sensitivity Analysis Applied to Injection Molding for Optimization of Gate Location and Injection Pressure
- Three-dimensional Numerical Modeling of Co-injection Molding
- Residual Stress and Warpage Models for Complex Injection Molded Parts
- Blow Molding
- Investigation of Design Parameters and Novel Design of Petaloid PET Bottles
