Home Physical Sciences Touchstones of Polymer Processing
Article
Licensed
Unlicensed Requires Authentication

Touchstones of Polymer Processing

  • James. L. White
Published/Copyright: June 5, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 17 Issue 3

Published Online: 2013-06-05
Published in Print: 2002-09-01

© 2002, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Editorial
  2. Touchstones of Polymer Processing
  3. Twin Screw Extrusion and Compounding
  4. Residence Time Distribution Curves of Screw Elements in Twin-Srew Extruder
  5. Rheological Effect of Zinc Surfactant on the TESPT-Silica Mixture in NR and S-SBR Compounds
  6. Optimization of Processing Conditions for Polymer Twin-Screw Extrusion
  7. Fibers and Film
  8. The Prediction of Sharkskin Instability Observed during Film Blowing
  9. Tensile Strength Characteristics of Polymer Melts
  10. Biaxially Oriented PP Films Using the Double Bubble Process
  11. Fiber and Film
  12. Crystallization and Orientation Development in Melt Spinning Isotactic PP of Varying Tacticity
  13. Extrusion Coating
  14. Extrusion Coating with Metallocene-Catalysed Polyethylenes
  15. Injection Molding
  16. Design Sensitivity Analysis Applied to Injection Molding for Optimization of Gate Location and Injection Pressure
  17. Three-dimensional Numerical Modeling of Co-injection Molding
  18. Residual Stress and Warpage Models for Complex Injection Molded Parts
  19. Blow Molding
  20. Investigation of Design Parameters and Novel Design of Petaloid PET Bottles
https://doi.org/10.3139/217.0203

Articles in the same Issue

  1. Editorial
  2. Touchstones of Polymer Processing
  3. Twin Screw Extrusion and Compounding
  4. Residence Time Distribution Curves of Screw Elements in Twin-Srew Extruder
  5. Rheological Effect of Zinc Surfactant on the TESPT-Silica Mixture in NR and S-SBR Compounds
  6. Optimization of Processing Conditions for Polymer Twin-Screw Extrusion
  7. Fibers and Film
  8. The Prediction of Sharkskin Instability Observed during Film Blowing
  9. Tensile Strength Characteristics of Polymer Melts
  10. Biaxially Oriented PP Films Using the Double Bubble Process
  11. Fiber and Film
  12. Crystallization and Orientation Development in Melt Spinning Isotactic PP of Varying Tacticity
  13. Extrusion Coating
  14. Extrusion Coating with Metallocene-Catalysed Polyethylenes
  15. Injection Molding
  16. Design Sensitivity Analysis Applied to Injection Molding for Optimization of Gate Location and Injection Pressure
  17. Three-dimensional Numerical Modeling of Co-injection Molding
  18. Residual Stress and Warpage Models for Complex Injection Molded Parts
  19. Blow Molding
  20. Investigation of Design Parameters and Novel Design of Petaloid PET Bottles
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 10.2.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.0203/html
Scroll to top button