Two-step annealing treatment for grain refinement of cold-worked AISI 316L stainless steel
-
Hamed Mirzadeh
,
Kamyar Sharifian
Abstract
Two-step annealing after cold rolling is proposed for the optimization of the annealing process of AISI 316L austenitic stainless steel toward more intense grain refinement. It was revealed that the first step of the annealing process at lower temperatures (i. e. 750 0C) can be used for the reversion of strain-induced martensite to austenite without uninhibited grain growth and recrystallization of the retained austenite. Afterwards, the primary recrystallization of the retained austenite takes place in the second step of the annealing process at higher temperatures (in the range of 850 to 950 0C). Carefully controlling the second annealing step resulted in a finer grain size and better mechanical response compared to those of a conventional one-step annealing approach.
© 2020 by Walter de Gruyter Berlin/Boston
Artikel in diesem Heft
- CONTENTS
- Original Contributions
- Effects of hydroxyapatite content on mechanical properties and in-vitro corrosion behavior of ZK60/HA composites
- The effect of plastic deformation on mechanical properties of aluminium matrix composites reinforced with 2D crystals
- Production and characterization of Al6061/zirconium carbide surface composites
- Microstructure and mechanical properties of rolled Mg–Gd–Zn–Zr–Ag–Al–Li alloys
- Anodizing and its effects on mechanical properties and corrosion resistance of laser additive manufactured Ti-6Al-4V alloy
- Comparative study of corrosion resistance between four non-commercial high manganese steel models and 9% nickel steel in aqueous solution of H2SO4
- Optimization of the grain boundary character distribution of pure copper by low-strain thermomechanical processing
- Two-step annealing treatment for grain refinement of cold-worked AISI 316L stainless steel
- Crystal structure, microstructure, and magnetic properties of the Fe2CrSi nanostructured Heusler alloy elaborated by the mechanical alloying method
- Experimental study of parameters influencing the damping of particulate, fibre-reinforced, hybrid, and sandwich composites
- Displacement cascade evolution in tungsten with pre-existing helium and hydrogen clusters: a molecular dynamics study
- Notifications
- DGM
- Conferences
- Imprint
Artikel in diesem Heft
- CONTENTS
- Original Contributions
- Effects of hydroxyapatite content on mechanical properties and in-vitro corrosion behavior of ZK60/HA composites
- The effect of plastic deformation on mechanical properties of aluminium matrix composites reinforced with 2D crystals
- Production and characterization of Al6061/zirconium carbide surface composites
- Microstructure and mechanical properties of rolled Mg–Gd–Zn–Zr–Ag–Al–Li alloys
- Anodizing and its effects on mechanical properties and corrosion resistance of laser additive manufactured Ti-6Al-4V alloy
- Comparative study of corrosion resistance between four non-commercial high manganese steel models and 9% nickel steel in aqueous solution of H2SO4
- Optimization of the grain boundary character distribution of pure copper by low-strain thermomechanical processing
- Two-step annealing treatment for grain refinement of cold-worked AISI 316L stainless steel
- Crystal structure, microstructure, and magnetic properties of the Fe2CrSi nanostructured Heusler alloy elaborated by the mechanical alloying method
- Experimental study of parameters influencing the damping of particulate, fibre-reinforced, hybrid, and sandwich composites
- Displacement cascade evolution in tungsten with pre-existing helium and hydrogen clusters: a molecular dynamics study
- Notifications
- DGM
- Conferences
- Imprint
