Startseite Wear behaviour of Mg alloys and their composites – a review
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Wear behaviour of Mg alloys and their composites – a review

  • Abhijit Dey und Krishna Murari Pandey
Veröffentlicht/Copyright: 30. Oktober 2018
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 109 Heft 11

Abstract

Magnesium metal matrix composites (MMCs) have generated keen interest in recent times for potential usage in automotive and aerospace industries owing to their superior strength to weight ratio and high temperature resistance. With the concurrent attention to the requirements of high wear resistance and weight reduction, research into magnesium based MMCs has produced significant contributions in the automotive industry in the last few decades. Materials possessing high wear resistance under dry sliding conditions are associated with a stable tribo-layer on the worn surface and the formation of fine equiaxed wear debris. For abrasive wear, the influence of sliding speed, applied load, wearing surface hardness, reinforcement fracture toughness, percentages of reinforcement and morphology are critical parameters in relation to the wear regime encountered by the material. In this review, contemporary wear theories, issues associated with counter-face wear, and wear mechanisms are discussed in detail. Other areas of research relevant to abrasive wear of Al-based Mg alloys and Mg MMCs containing discontinuous reinforcement phases, such as the role of the reinforcement phase, are presented. Major effects such as interfacial transition, agglomerating phenomenon, formation, and distribution of in-situ Mg2Si, MgAl2O4, β-Mg17Al12and MgO in the metallic matrix, filler–matrix bonding and phase transition are discussed in this article.

Keywords: Magnesium alloys; Wear mechanism; Delamination; Oxidation; Plastic yielding
*Correspondence address, Dr. Krishna Murari Pandey, Depatrment of Mechanical Engineering, National Institute of Technology, Silchar, India, E-mail:

References

[1] B.L.Mordike, K.U.Kainer: Magnesium Alloys and Their Application, Wiley-VCH Verlag GmbH & Co.KGaA, Weinheim, (2000).Suche in Google Scholar

[2] K.U.Kainer: Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, (2003) 114. 10.1002/3527602046Suche in Google Scholar

[3] A.A.Luo: Int. Mater. Rev.49 (2004) 13. 10.1179/095066004225010497Suche in Google Scholar

[4] M.M.Avedesian, H.Baker: Magnesium and Magnesium Alloys (ASM Specialty Handbook), ASM international, New York, 1999.Suche in Google Scholar

[5] I.J.Polmear: Light Alloys: Second ed.Chapman and Hall, New York, (1989) 170.Suche in Google Scholar

[6] F.Kabirian, R.Mahmudi: Adv. Eng. Mater.11 (2009) 189. 10.1002/adem.200800223Suche in Google Scholar

[7] F.Kabirian, R.Mahmudi: Metall. Mater. Trans. A40 (2009) 116. 10.1007/s11661-008-9699-7Suche in Google Scholar

[8] D.A.Porter, K.E. Easterling, Second ed., Chapman and Hall, London, (1992) 208.Suche in Google Scholar

[9] X.Ai, G.Quan: F.Czerwinski (Ed.): Magnesium Alloys-Design, Processing and Properties, InTech, Vienna (2011) 351. 10.5772/13392Suche in Google Scholar

[10] A.A.Luo, M.O.Pekguleryuz: J. Mater. Sci.29 (1994) 5254–5266. 10.1007/BF01171534Suche in Google Scholar

[11] F.Kabirian, R.Mahmudi: Metall. Mater. Trans. A40 (2009) 2190. 10.1007/s11661-008-9699-7Suche in Google Scholar

[12] F.Khomamizadeh, B.Nami, S.Khoshkhooei: Metall. Mater. Trans. A36 (2005) 3489. 10.1007/s11661-005-0022-6Suche in Google Scholar

[13] R.Mahmudi, F.Kabirian, Z.Nematollahi: Mater. Des.32 (2011) 2583. 10.1016/j.matdes.2011.01.040Suche in Google Scholar

[14] B.Nami, H.Razavi, S.G.Mirdamadi, S.G.Shabestari, S.M.Miresmaeili: Metallurgical and Materials Transactions41A (2010) 1973–1982. 10.1007/s11661-010-0238-ySuche in Google Scholar

[15] B.Jing, S.Yangshan, X.Shan, X.Feng, Z.Tianbai: Mater. Sci. Eng. A419 (2006) 181. 10.1016/j.msea.2005.12.017Suche in Google Scholar

[16] E.Baril, P.Labelle, M.O.Pekguleryuz: J. Min., Meta. Mater. Soc. (2003) 34. 10.1007/s11837-003-0207-7Suche in Google Scholar

[17] W.Qudong, C.Wenzhou, Z.Xiaoqin, L.Yizhen, D.Wenjiang, Z.Yanping, X.Xiaoping: J. Mater. Sci.36 (2001) 3035. 10.1023/A:1017927109291Suche in Google Scholar

[18] J.Zhang, P.Yu, K.Liu, D.Fang, D.Tang, J.Meng: Mater. Des.30 (2009) 2372. 10.1016/j.matdes.2008.10.028Suche in Google Scholar

[19] A.A.Luo, M.P.Balogh, B.R.Powell: Metall. Mater. Trans. A33 (2002) 567. 10.1007/s11661-002-0118-1Suche in Google Scholar

[20] K.Hiratsuka, A.Enomoto, T.Sasada: Wear153 (1992) 361. 10.1016/0043-1648(92)90176-9Suche in Google Scholar

[21] H.Chen, A.T.Alpas: Wear246 (2000) 106. 10.1016/S0043-1648(00)00495-6Suche in Google Scholar

[22] N.N.Aung, W.Zhou, L.E.N.Lim: Wear265 (2008) 780. 10.1016/j.wear.2008.01.012Suche in Google Scholar

[23] J.An, R.G.Li, Y.Lu, C.M.Chen, Y.Xu, X.Chen, L.M.Wang: Wear265 (2008) 97. 10.1016/j.wear.2007.08.021Suche in Google Scholar

[24] P.J.Blau, M.Walukas: Tribo. Int.33 (2000) 573. 10.1016/S0301-679X(00)00014-1Suche in Google Scholar

[25] K.M.Asi, A.Masoudi, F.Khomamizadeh: Mater. Sci. Eng. A527 (2010) 2027. 10.1016/j.msea.2009.11.061Suche in Google Scholar

[26] Q.Q.Ju, L.Y.Bing, Y.X.Hong: Trans. Nonferrous Met. Soc.13 (2003) 111.Suche in Google Scholar

[27] J.An, W.Sun, X.D.Niu: Tribol. Lett.65 (2017) 98. 10.1007/s11249-017-0882-0Suche in Google Scholar

[28] S.Das, A.T.Morale, A.T.Alpas: Wear268 (2010) 94. 10.1016/j.wear.2009.07.001Suche in Google Scholar

[29] S.C.Sharma, B.Anand, M.Krishna: Wear241 (2000) 33. 10.1016/S0043-1648(00)00349-5Suche in Google Scholar

[30] T.J.Chen, Y.Maa, B.Li, Y.D.Li, Y.Hao: Mater. Des.30 (2009) 235. 10.1016/j.matdes.2008.05.002Suche in Google Scholar

[31] P. BalaSrinivasan, C.Blawert, W.Dietzel: Mater. Character.60 (2009) 843. 10.1016/j.matchar.2008.10.010Suche in Google Scholar

[32] S.A.Selvan, S.Ramanathan: Mater. Des.31 (2010) 1930. 10.1016/j.matdes.2009.10.054Suche in Google Scholar

[33] A.Araghi, M.H.Paydar: Mater. Des.31 (2010) 3095. 10.1016/j.matdes.2009.12.042Suche in Google Scholar

[34] K.J.Huang, LiYan, C.S.Wang, C.S.Xie, C.R.Zhou: Trans. Nonferrous Met. SOC. China20 (2010) 1351. 10.1016/S1003-6326(09)60092-3Suche in Google Scholar

[35] Y.Liu, S.R.Yu, J.D.Liu, Z.W.Han, D.S.Yuan: Trans. Nonferrous Met. Soc. China21(2011) 483. 10.1016/S1003-6326(11)60912-6Suche in Google Scholar

[36] A.Zafari, H.M.Ghasemi, R.Mahmudi: Wear292–293 (2012) 33. 10.1016/j.wear.2012.06.002Suche in Google Scholar

[37] C.Liang, C.Li, X.X.Lv, J.An: Wear312 (2014) 29. 10.1016/j.wear.2014.02.001Suche in Google Scholar

[38] C.Taltavull, B.Torres, A.J.Lo pez, J.Rams: Wear301 (2013) 615. 10.1016/j.wear.2012.11.039Suche in Google Scholar

[39] M.H.Fini, A.Amadeh: Trans. Nonferrous Met. Soc. China23 (2013) 2914. 10.1016/S1003-6326(13)62814-9Suche in Google Scholar

[40] C.Taltavull, B.Torres, A.J.Lopez, J.Rams: Wear301 (2013) 15. 10.1016/j.wear.2012.11.039Suche in Google Scholar

[41] C.Taltavull, P.Rodrigo, B.Torres, A.J.Lopez, J.Rams: Mater. Des.56 (2014) 549. 10.1016/j.matdes.2013.12.015Suche in Google Scholar

[42] J.F.Archard, W.Hirst: Proc. R. Soc. Lond. Ser.A236 (1956) 397. 10.1098/rspa.1956.0144Suche in Google Scholar

[43] M.I.Hu, Q.D.Wang, L.I.Cheng, W.J.Ding: Trans. Nonferrous Met. Soc. China22(2012) 1918. 10.1016/S1003-6326(11)61194-1Suche in Google Scholar

[44] C.Liang, T.F.Su, Y.B.Wang, X.Han, M.L.Yin, J.An: J. Tribol. Trans. ASME137 (2015) 031602. 10.1115/1.4029846Suche in Google Scholar

[45] T.F.Su, X.Han, Y.B.Wang, M.L.Yin, C.Liang, J.An: Tribol. Trans.58 (2015) 549. 10.1080/10402004.2014.993782Suche in Google Scholar

[46] A.W.El-Morsy: Mater. Sci. Eng. A473 (2008) 330. 10.1016/j.msea.2007.03.096Suche in Google Scholar

[47] B.Cicek, H.Ahlatci, Y.Sun: Mater. Des.50 (2013) 929. 10.1016/j.matdes.2013.03.097Suche in Google Scholar

[48] C.Liang, C.Li, X.X.Lv, J.An: Wear312 (2014) 29. 10.1016/j.wear.2014.02.001Suche in Google Scholar

[49] C.Liang, T.F.Su, Y.B.Wang, X.Han, M.L.Yin, J.An: J. Tribol. Trans. ASME137 (2015) 031602. 10.1115/1.4029846Suche in Google Scholar

[50] C.Taltavull, P.Rodrigo, B.Torres, A.J.Lo pez, J.Rams: Mater. Des.56 (2014) 549. 10.1016/j.matdes.2013.12.015Suche in Google Scholar

[51] C.Y.H.Lim, S.C.Lim, M.Gupta: Wear255 (2003) 629. 10.1016/S0043-1648(03)00121-2Suche in Google Scholar

[52] C.Y.H.Lim, D.K.Leo, J.J.S.Ang, M.Gupta: Wear259 (2005) 620. 10.1016/j.wear.2005.02.006Suche in Google Scholar

[53] P.Abachi, A.Masoudi, K.Purazrang: Mater. Sci. Eng.A 435–436 (2006) 653. 10.1016/j.msea.2006.08.020Suche in Google Scholar

[54] QIQing-ju: Trans. Nonferrous Met. SOC. China16(2006) 1135. 10.1016/S1003-6326(06)60390-7Suche in Google Scholar

[55] M.J.Zhang, Y.B.Liu, X.H.Yang, A.N.Jian, K.S.Luo: Trans. Nonferrous Met. SOC. China18 (2008) 273. 10.1016/S1003-6326(08)60190-9Suche in Google Scholar

[56] A.K.Mondal, S.Kumar: Wear267 (2009) 458. 10.1016/j.wear.2008.12.036Suche in Google Scholar

[57] P.Rodrigo, M.Campo, B.Torres, M.D.Escalera, E.Otero, J.Rams: App. Surf. Sci.255 (2009) 9174. 10.1016/j.apsusc.2009.06.122Suche in Google Scholar

[58] J.Umeda, K.Kondoh, H.Imai: Mater. Sci. Eng. A504 (2009) 157. 10.1016/j.msea.2008.10.054Suche in Google Scholar

[59] M.H.Korayema, R.Mahmudia, H.M.Ghasemia, W.J.Poole: Wear268 (2010) 405. 10.1016/j.wear.2009.08.031Suche in Google Scholar

[60] L.Falcon-Franco, E.Bedolla-Becerril, J.Lemus-Ruiz, J.G.Gonzalez-Rodríguez, R.Guardian, I.Rosales: Composites: Part B42 (2011) 275. 10.1016/j.compositesb.2010.11.012Suche in Google Scholar

[61] M.Srinivasan, C.Loganathan, M.Kamaraj, Q.B.Nguyen, M.Gupta, R.Narayanasamy: Trans. Nonferrous Met. Soc. China22(2012) 60. 10.1016/S1003-6326(11)61140-0Suche in Google Scholar

[62] H.U.Yong, L.Rao: Trans. Nonferrous Met. Soc. China22 (2012) 2659. 10.1016/S1003-6326(11)61514-8Suche in Google Scholar

[63] D.Lu, Y.Jiang, R.Zhou: Wear305 (2013) 286. 10.1016/j.wear.2012.11.079Suche in Google Scholar

[64] A.Banerji, H.Hu, A.T.Alpas: Wear301 (2013) 626. 10.1016/j.wear.2013.01.091Suche in Google Scholar

[65] A.Zafari, H.M.Ghasemin, R.Mahmudi: Wear303 (2013) 98. 10.1016/j.wear.2013.02.016Suche in Google Scholar

[66] L.Qi, J.Guan, J.Liu, J.Zhou, X.Wei: Wear307 (2013) 127. 10.1016/j.wear.2013.08.024Suche in Google Scholar

[67] T.Z.Wei, S.R.Bt Shamsuri, C.S.Yee, M.W.A.Rashida, Q.Ahsan: Proc. Eng.68 (2013) 703. 10.1016/j.proeng.2013.12.242Suche in Google Scholar

[68] S.V.Muley, S.P.Singh, P.Sinha, P.P.Bhingole, G.P.Chaudhari: Mater. Des.53 (2014) 475. 10.1016/j.matdes.2013.07.056Suche in Google Scholar

[69] B.Selvam, P.Marimuthu, R.Narayanasamy, V.Anandakrishnan, K.S.Tun, M.Gupta, M.Kamaraj: Mater. Des.58 (2014) 475. 10.1016/j.matdes.2014.02.006Suche in Google Scholar

[70] A.Das, S.P.Harimkar: J. Mater. Sci. Technol.30(11) (2014) 1059. 10.1016/j.jmst.2014.08.002Suche in Google Scholar

[71] Q.B.Nguyen, Y.H.M.Sim, M.Gupta, C.Y.H.Lim: Tribo. Int.82 (2015) 464. 10.1016/j.triboint.2014.02.024Suche in Google Scholar

[72] B.V.Manoj Kumar, B.Basu, V.S.R.Murthy, M.Gupta: Composites: Part A36 (2005) 13. 10.1016/S1359-835X(04)00184-8Suche in Google Scholar

[73] S.Q.Wang, Z.R.Yang, Y.T.Zhao, M.X.Wei: Tribo. Lett.38 (2010) 39. 10.1007/s11249-009-9569-5Suche in Google Scholar

[74] Q.B.Nguyen, M.Gupta: J. Alloys Compd.459 (2008) 244. 10.1016/j.jallcom.2007.05.038Suche in Google Scholar

[75] R.A.Saravanan, M.K.Surappa: Mater. Sci. Eng. A276 (2000) 108. 10.1016/S0921-5093(99)00498-0Suche in Google Scholar

[76] V.I.Semenov, Y.R.Jeng, S.J.Huang, Y.ZhDao, S.J.Hwang, L.Sh.Shuster, S.V.Chertovskikh, P.Ch.Lin: J. Friction Wear30 (3) (2009) 194. 10.3103/S1068366609030088Suche in Google Scholar

[77] K.Xiu, H.Y.Wang, H.L.Sui, Y.Wang, C.L.Xu, J.G.Wang, Q.C.Jiang: Mater. Sci.41 (2006) 7052. 10.1007/s10853-005-4228-1Suche in Google Scholar

[78] A.K.Mondal, B.S.S.Chandra Rao, S.Kumar: Tribo. Int.40 (2007) 290. 10.1016/j.triboint.2005.09.016Suche in Google Scholar

[79] G.W.Stachowiak, A.W.Batchelor: Engineering tribology. 3rd edition. Amsterdam, Boston: Elsevier Butterworth-Heinemann; (2005). ISBN-9780750678360.Suche in Google Scholar

[80] N.K.Myshkin, C.K.Kim, M.I.Petrokovets: Introduction to tribology. Seoul: Cheong Moon Gak; 1997.Suche in Google Scholar

[81] B.Bhushan: Introduction to tribology. New York: John Wiley and Sons; 2002.Suche in Google Scholar

[82] W.J.Huang, Q.Lin, C.I.Liu: Trans. Nonferrous Met. Soc. China22(2012) 2057. 10.1016/S1003-6326(11)61211-9Suche in Google Scholar

[83] GneccoE, MeyerE: Fundamentals of friction and wear on the nanoscale. Berlin: Springer; 2007. 10.1007/978-3-540-36807-6Suche in Google Scholar

[84] S.C.Lim, M.F.Ashby: Acta Metall.35(1987)1. 10.1016/0001-6160(87)90016-2Suche in Google Scholar

[85] J.An, R.G.Li, Y.Lu, C.M.Chen, Y.Xu, X.Chen: Wear265 (2008) 97. 10.1016/j.wear.2007.08.021Suche in Google Scholar

[86] N.P.Suh: Wear44 (1977) 1. 10.1016/0043-1648(77)90081-3Suche in Google Scholar

[87] B.Venkataraman, G.Sundararajan: Acta Mater.44 (1996) 451. 10.1016/1359-6454(95)00217-0Suche in Google Scholar

[88] E.I.Morsy, A.Wahab: Mater. Sci. Eng. A473 (2008) 330. 10.1016/j.msea.2007.03.096Suche in Google Scholar

[89] G.W.Stachowiak, A.W.Batchelor, Engineering Tribology, Second ed., Butterworth Heinemann, Boston, (2001) 327.Suche in Google Scholar

[90] N.Hort, Y.D.Huang, K.U.Kainer: Adv. Eng. Mater.8 (2006) 235. 10.1002/adem.200500202Suche in Google Scholar

[91] J.An, Y.X.Zhang · X.X.Lv: Tribology Letters66 (2018) 14. 10.1007/s11249-017-0968-8Suche in Google Scholar

[92] W.Ziang, F.X.An, F.T.H.Su, F.W.Zi, Y.J.Mn: Tribo. Trans.57 (2014) 1077. 10.1080/10402004.2014.933939Suche in Google Scholar

[93] A.Zafari, H.M.Ghasemi, R.Mahmudi: Mater. Des.54 (2014) 544. 10.1016/j.matdes.2013.08.073Suche in Google Scholar

[94] A.Boby, A.Srinivasan, U.T.S.Pillai, B.C.Pai: Metall. Mater. Trans. A46 (2015). 10.1007/s11661-015-3013-2Suche in Google Scholar

[95] X.Yang, Y.Okabe, H.Miura, T.Sakai: J. Mater. Sci.47 (2012) 2823. 10.1007/s10853-011-5830-zSuche in Google Scholar

[96] X.Chen, Z.Han, K.Lu: Wear30 (2014) 41. 10.1016/j.wear.2014.08.010Suche in Google Scholar

Received: 2017-11-30
Accepted: 2018-04-30
Published Online: 2018-10-30
Published in Print: 2018-11-12

© 2018, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. An artificial intelligence paradigm in heuristic search of tensile behaviour of titanium alloys
  5. The effect of the cooling rate on the course of oxidation of gamma titanium aluminide alloy
  6. Physical and electrochemical characteristics of low pressure cold sprayed aluminium composite coating on magnesium substrate
  7. The effect of Al2O3 reinforcement particles on the corrosion behavior of Al(Zn) solid solution matrix
  8. Effect of Zr content on the existence form of Zr and as-cast structure of high purity commercial aluminium
  9. Ethylenediamine-assisted synthesis of barium bismuthate microrods and solar light photocatalytic performance
  10. Structural evolution and formation mechanism of LiNi0.6Co0.2Mn0.2O2 during high-temperature solid-state synthesis
  11. Review
  12. Wear behaviour of Mg alloys and their composites – a review
  13. Short Communications
  14. Low-temperature sintering of 0.96(K0.5Na0.5)NbO3-0.04LiNbO3 lead-free piezoelectric ceramics modified with CuO
  15. DGM News
  16. DGM News
https://doi.org/10.3139/146.111707
Schlagwörter für diesen Artikel
Magnesium alloys; Wear mechanism; Delamination; Oxidation; Plastic yielding

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. An artificial intelligence paradigm in heuristic search of tensile behaviour of titanium alloys
  5. The effect of the cooling rate on the course of oxidation of gamma titanium aluminide alloy
  6. Physical and electrochemical characteristics of low pressure cold sprayed aluminium composite coating on magnesium substrate
  7. The effect of Al2O3 reinforcement particles on the corrosion behavior of Al(Zn) solid solution matrix
  8. Effect of Zr content on the existence form of Zr and as-cast structure of high purity commercial aluminium
  9. Ethylenediamine-assisted synthesis of barium bismuthate microrods and solar light photocatalytic performance
  10. Structural evolution and formation mechanism of LiNi0.6Co0.2Mn0.2O2 during high-temperature solid-state synthesis
  11. Review
  12. Wear behaviour of Mg alloys and their composites – a review
  13. Short Communications
  14. Low-temperature sintering of 0.96(K0.5Na0.5)NbO3-0.04LiNbO3 lead-free piezoelectric ceramics modified with CuO
  15. DGM News
  16. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 26.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111707/html
Button zum nach oben scrollen