Startseite Review on sago thermoplastic starch composite films reinforced with nanocellulose
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Review on sago thermoplastic starch composite films reinforced with nanocellulose

  • Dzun Noraini Jimat EMAIL logo , Yusilawati Ahmad Nor und Noor Illi Mohamad Puad
Veröffentlicht/Copyright: 22. März 2023
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

Recently, many studies have been carried out on developing green composites that are eco-friendly and more sustainable compared to fuel-derived composites. Thermoplastic starch (TPS) is one of the potential biopolymer materials that can be used as food packaging materials, pharmaceuticals and many other applications. Sago (Metroxylon sagu) is unlike other starch-based composite such as cassava and corn, which are highly utilized and popular option sources for variety applications in industries. This renewable starch can be a competitive starch source like other starches if rigorous scientific research study is conducted to explore other findings, which might be important for its production and usage in various industries. Research studies related to sago TPS are still lacked, and it is difficult to compare its performance with TPS made from other starches as its preparation differs based on the starch source. The TPS composite generally exhibits low mechanical strength and poor barrier properties. Reinforcing sago TPS nanocomposites with nanocellulose (NC) is expected to enhance its mechanical and barrier properties. This book chapter covers the overview of characteristics and extraction of sago from its pith as well as its usage to make thermoplastic starch composite. The characteristics of sago TPS nanocomposite reinforced with nanocellulose (NC) is also discussed based on a few research studies due to its published research findings are still limited.


Corresponding author: Dzun Noraini Jimat, Department of Biotechnology Engineering, Kulliyyah of Engineering, International Islamic University of Malaysia, 53100, Selangor, Malaysia, E-mail:

Award Identifier / Grant number: FRGS19-091-0700

Funding source: International Islamic University Malaysia

  1. Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: The authors are thankful to the Ministry of Education Malaysia (FRGS19-091-0700) and International Islamic University Malaysia for all supports to this book chapter.

  3. Conflict of interest statement: The authors declare no conflicts of interest regarding this article.

References

1. Zhang, Y, Rempel, C, Liu, Q. Thermoplastic starch processing and characteristics-A review. Crit Rev Food Sci Nutr 2014;54:1353–70. https://doi.org/10.1080/10408398.2011.636156.Suche in Google Scholar PubMed

2. Ahmad, FB, Williams, PA, Doublier, JL, Durand, S, Buleon, A. Physico-chemical characterisation of sago starch. Carbohydr Polym 1999;38:361–70. https://doi.org/10.1016/S0144-8617(98)00123-4.Suche in Google Scholar

3. Jiang, T, Duan, Q, Zhu, J, Liu, H, Yu, L. Starch-based biodegradable materials: challenges and opportunities. Adv Ind Eng Polym Res 2020;3:8–18. https://doi.org/10.1016/j.aiepr.2019.11.003.Suche in Google Scholar

4. Jong, FS. An overview of sago industry development, 1980s–2015. In: Ehara, H, Toyoda, Y, Johnson, D, editors. Sago palm. Singapore: Springer; 2018:75–89 pp.10.1007/978-981-10-5269-9_6Suche in Google Scholar

5. Karim, AA, Tie, APL, Manan, DMA, Zaidul, ISM. Starch from the sago (Metroxylon sagu) palm tree – properties, prospects, and challenges as a new industrial source for food and other uses. Compr Rev Food Sci Food Saf 2008;7:215–28. https://doi.org/10.1111/j.1541-4337.2008.00042.x.Suche in Google Scholar PubMed

6. Craun Research Sdn Bhd; n.d. Available from: https://craunresearch.com.my/.Suche in Google Scholar

7. Zhu, F. Recent advances in modifications and applications of sago starch. Food Hydrocolloids 2019;96:412–23. https://doi.org/10.1016/j.foodhyd.2019.05.035.Suche in Google Scholar

8. Koganti, N, Mitchell, J, Macnaughtan, W, Hill, S, Foster, T. Effect of granule organisation on the behaviour of starches in the NMMO (N-methyl morpholine N-oxide) solvent system. Carbohydr Polym 2015;116:103–10. https://doi.org/10.1016/j.carbpol.2014.06.060.Suche in Google Scholar PubMed

9. Uthumporn, U, Wahidah, N, Karim, AA. Physicochemical properties of starch from sago (Metroxylon Sagu) palm grown in mineral soil at different growth stages. IOP Conf Ser Mater Sci Eng 2014;62:1–12. https://doi.org/10.1088/1757-899X/62/1/012026.Suche in Google Scholar

10. Vamadevan, V, Bertoft, E. Impact of different structural types of amylopectin on retrogradation. Food Hydrocolloids 2018;80:88–96. https://doi.org/10.1016/j.foodhyd.2018.01.029.Suche in Google Scholar

11. Mohamad Naim, H, Yaakub, AN, Awang Hamdan, DA. Commercialization of sago through estate plantation scheme in Sarawak: the way forward. Int J Agron 2016;8319542. https://doi.org/10.1155/2016/8319542.Suche in Google Scholar

12. Ma, XF, Yu, JG, Wang, N. Fly ash-reinforced thermoplastic starch composites. Carbohydr Polym 2007;67:32–9. https://doi.org/10.1016/j.carbpol.2006.04.012.Suche in Google Scholar

13. Souza, RCR, Andrade, CT. Investigation of the gelatinization and extrusion processes of corn starch. Adv Polym Technol 2002;21:17–24. https://doi.org/10.1002/adv.10007.Suche in Google Scholar

14. Yossathorn, T, Jutarat, P. Effect of starch types on properties of biodegradable polymer based on thermoplastic starch process by injection molding technique. Songklanakarin J Sci Technol 2015;37:193–9.Suche in Google Scholar

15. Halimatul, MJ, Sapuan, SM, Jawaid, M, Ishak, MR, Ilyas, RA. Effect of sago starch and plasticizer content on the properties of thermoplastic films: mechanical testing and cyclic soaking-drying. Polimery/Polymers 2019;64:422–31. https://doi.org/10.14314/polimery.2019.6.5.Suche in Google Scholar

16. Ismail, H, Zaaba, NF. Tensile properties, degradation behavior, and water absorption of sago starch plastic films. J Vinyl Addit Technol 2012;18:235–40. https://doi.org/10.1002/vnl.20300.Suche in Google Scholar

17. Bangar, SP, Whiteside, WS. Nano-cellulose reinforced starch bio composite films-A review on green composites. Int J Biol Macromol 2021;185:849–60. https://doi.org/10.1016/j.ijbiomac.2021.07.017.Suche in Google Scholar PubMed

18. Balakrishnan, P, Gopi, S, Geethamma, VG, Kalarikkal, N, Thomas, S. Cellulose nanofiber vs nanocrystals from pineapple leaf fiber: a comparative studies on reinforcing efficiency on starch nanocomposites. Macromol Symp 2018;380:1–7. https://doi.org/10.1002/masy.201800102.Suche in Google Scholar

19. Pérez-Pacheco, E, Canto‐Pinto, JC, Moo‐Huchin, VM, Estrada‐Mota, IA, Estrada‐León, RJ, Chel‐Guerrero, L. Thermoplastic starch (TPS)‐cellulosic fibers composites: mechanical properties and water vapor barrier: a review. In: Composites from renewable and sustainable materials. London: Intech; 2016. https://doi.org/10.5772/65397.Suche in Google Scholar

20. Rivadeneira-Velasco, KE, Utreras-Silva, CA, Díaz-Barrios, A, Sommer-Márquez, AE, Tafur, JP, Michell, RM. Green nanocomposites based on thermoplastic starch: a review. Polymers 2021;13. https://doi.org/10.3390/polym13193227.Suche in Google Scholar PubMed PubMed Central

21. Nasution, H, Harahap, H, Al Fath, MT, Afandy, Y. Physical properties of sago starch biocomposite filled with Nanocrystalline Cellulose (NCC) from rattan biomass: the effect of filler loading and co-plasticizer addition. IOP Conf Ser Mater Sci Eng 2018;309. https://doi.org/10.1088/1757-899X/309/1/012033.Suche in Google Scholar

22. Lisdayana, N, Fahma, F, Sunarti, TC, Iriani, ES. Thermoplastic starch–PVA nanocomposite films reinforced with nanocellulose from oil palm empty fruit bunches (OPEFBs): effect of starch type. J Nat Fibers 2020;17:1069–80. https://doi.org/10.1080/15440478.2018.1558142.Suche in Google Scholar

23. Zhou, Y, Wang, D, Zhang, L, Du, X, Zhou, X. Effect of polysaccharides on gelatinization and retrogradation of wheat starch. Food Hydrocolloids 2008;22:505–12. https://doi.org/10.1016/j.foodhyd.2007.01.010.Suche in Google Scholar

Received: 2022-02-20
Accepted: 2023-01-31
Published Online: 2023-03-22

© 2023 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Reviews
  3. Modern analytical approach in biopolymer characterization
  4. Development of nanocellulose fiber reinforced starch biopolymer composites: a review
  5. Recent developments in sago starch thermoplastic bio-composites
  6. Mechanical degradation of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch (TPS)/poly (lactic acid) (PLA) blend bionanocomposites in aqueous environments
  7. Computational design of the novel building blocks for the metal-organic frameworks based on the organic ligand protected Cu4 cluster
  8. Highly functional nanocellulose-reinforced thermoplastic starch-based nanocomposites
  9. Spectral peak areas do not vary according to spectral averaging scheme used in functional MRS experiments at 3 T with interleaved visual stimulation
  10. Triterpenoids of antibacterial extracts from the leaves of Bersama abyssinica Fresen (Francoaceae)
  11. Immediate effects of atrazine application on soil organic carbon and selected macronutrients and amelioration by sawdust biochar pretreatment
  12. Process configuration of combined ozonolysis and anaerobic digestion for wastewater treatment
  13. Concentration levels and risk assessment of organochlorine and organophosphate pesticide residue in selected cereals and legumes sold in Anambra State, south-eastern Nigeria
  14. XRD and cytotoxicity assay of submitted nanomaterial industrial samples in the Philippines
  15. Comparative study of the photocatalytic degradation of tetracycline under visible light irradiation using Bi24O31Br11-anchored carbonaceous and silicates catalyst support
  16. Xanthoangelol, geranilated chalcone compound, isolation from pudau leaves (Artocarpus kemando Miq.) as antibacterial and anticancer
  17. Barley thermoplastic starch nanocomposite films reinforced with nanocellulose
  18. Integration of chemo- and bio-catalysis to intensify bioprocesses
  19. Fabrication of starch-based packaging materials
  20. Potato thermoplastic starch nanocomposite films reinforced with nanocellulose
  21. Review on sago thermoplastic starch composite films reinforced with nanocellulose
  22. Wheat thermoplastic starch composite films reinforced with nanocellulose
  23. Synergistic effect in bimetallic gold catalysts: recent trends and prospects
  24. Simultaneous removal of methylene blue, copper Cu(II), and cadmium Cd(II) from synthetic wastewater using fennel-based adsorbents
  25. The investigation of the physical properties of an electrical porcelain insulator manufactured from locally sourced materials
  26. Concentration evaluation and risk assessment of pesticide residues in selected vegetables sold in major markets of Port Harcourt South-South Nigeria
  27. Detection of iodine in aqueous extract of plants through modified Mohr’s method
  28. Exploration of bioactive compounds from Mangifera indica (Mango) as probable inhibitors of thymidylate synthase and nuclear factor kappa-B (NF-Κb) in colorectal cancer management
  29. A new sphingoid derivative from Acacia hockii De Wild (Fabaceae) with antimicrobial and insecticidal properties
  30. Protection of wood against bio-attack and research of new effective and environmental friendly fungicides
  31. Computational investigation of Arbutus serratifolia Salisb molecules as new potential SARS-CoV-2 inhibitors
  32. Exploring the solvation of water molecules around radioactive elements in nuclear waste water treatment
Heruntergeladen am 24.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/psr-2022-0016/html
Button zum nach oben scrollen