Abstract
In this study, the short-cut web interlayer and three-dimensional (3D) needle-punched technique were used to improve the interlaminar shear strength (ILSS) of 2.5D fabric laminated composites. The ILSS was measured by the short beam testing method, and the tensile and bending tests were carried out to investigate the in-plane mechanical properties. Observations on microstructure and crack propagation were carried out. The damage mechanisms of different 2.5D fabric laminated composites were analyzed. The results showed that the short-cut web interlayer and 3D needle-punched technique resulted in the improvement of ILSS, and they affected the tensile and bending properties of 2.5D fabric laminated composites.
Acknowledgments
The authors wish to acknowledge the sponsorship of Tianjin Municipal Science and Technology Commission, China (no. 13TXSYJC40500).
References
[1] Al-Khudairi O, Hadavinia H, Waggott A, Lewis E, Little C. Mater. Des. 2015, 66, 93–102.10.1016/j.matdes.2014.10.038Suche in Google Scholar
[2] Arai M, Hirokawa JI, Hanamura Y, Ito H, Hojo M, Quaresimin M. Compos. Part B 2014, 65, 26–33.10.1016/j.compositesb.2014.02.025Suche in Google Scholar
[3] Kamiya R, Cheeseman BA, Popper P, Chou T-W. Compos. Sci. Technol. 2000, 60, 33–47.10.1016/S0266-3538(99)00093-7Suche in Google Scholar
[4] Mouritz A, Bannister M, Falzon P, Leong K. Compos. Part A 1999, 30, 1445–1461.10.1016/S1359-835X(99)00034-2Suche in Google Scholar
[5] Cartié DDR, Laffaille JM, Partridge IK, Brunner AJ. Eng. Fract. Mech. 2009, 76, 2834–2845.10.1016/j.engfracmech.2009.07.018Suche in Google Scholar
[6] Lee DJ, Palley I. J. Compos. Mater. 2012, 46, 1357–1365.10.1177/0021998311418547Suche in Google Scholar
[7] Tang Y, Ye L, Zhang D, Deng S. Compos. Part A 2011, 42, 1943–1950.10.1016/j.compositesa.2011.08.019Suche in Google Scholar
[8] Ye Y, Chen H, Wu J, Chan CM. Compos. Sci. Technol. 2011, 71, 717–723.10.1016/j.compscitech.2011.01.018Suche in Google Scholar
[9] Abali F, Pora A, Shivakumar K. J. Compos. Mater. 2003, 37, 453–464.10.1177/0021998303037005053Suche in Google Scholar
[10] Xu H, Zhang L, Cheng L. Mater. Des. 2014, 64, 434–440.10.1016/j.matdes.2014.07.060Suche in Google Scholar
[11] Bilisik K, Bilisik K. Text. Res. J. 2013, 83, 1414–1436.10.1177/0040517512450766Suche in Google Scholar
[12] Sohn MS, Hu XZ. Scr. Metall. Mater. 1994, 30, 1467–1472.10.1016/0956-716X(94)90247-XSuche in Google Scholar
[13] Sohn MS, Hu XZ. Compos. Sci. Technol. 1998, 58, 211–220.10.1016/S0266-3538(97)00114-0Suche in Google Scholar
[14] Huang BZ, Hu XZ, Liu J. Compos. Sci. Technol. 2004, 64, 2165–2175.10.1016/j.compscitech.2004.03.014Suche in Google Scholar
[15] Kusaka T, Hojo M, Fukuoka T, Ishibashi M. J. Phys. IV 2006, 134, 1105–1111.10.1051/jp4:2006134169Suche in Google Scholar
[16] Hojo M, Nakashima K, Kusaka T, Tanaka M, Adachi T, Fukuoka T, Ishibashi M. Int. J. Fatigue 2010, 32, 37–45.10.1016/j.ijfatigue.2009.02.025Suche in Google Scholar
[17] Kusaka T, Watanabe K, Hojo M, Fukuoka T, Ishibashi M. Eng. Fract. Mech. 2012, 96, 433–446.10.1016/j.engfracmech.2011.10.015Suche in Google Scholar
[18] Kusaka T, Watanabe K, Hojo M, Fukuoka T, Ishibashi M. Compos. Sci. Technol. 2009, 69, 2323–2330.10.1016/j.compscitech.2009.01.028Suche in Google Scholar
[19] Chen T, Liao J, Liu G, Zhang F, Gong Q. Carbon 2003, 41, 993–999.10.1016/S0008-6223(02)00445-1Suche in Google Scholar
[20] Fan S, Zhang L, Xu Y, Cheng L, Lou J, Zhang J, Yu L, Yuan Y, Zhang F, Tian G, Chen Z, Lou, J. Compos. Sci. Technol. 2007, 67, 2390–2398.10.1016/j.compscitech.2007.01.008Suche in Google Scholar
[21] Cai Y, Fan S, Liu H, Zhang L, Cheng L, Dong B, Jiang J. Compos. Sci. Technol. 2009, 69, 2447–2453.10.1016/j.compscitech.2009.06.019Suche in Google Scholar
[22] Hallal A, Younes R, Fardoun F, Nehme S. Compos. Struct. 2012, 94, 3009–3028.10.1016/j.compstruct.2012.03.019Suche in Google Scholar
[23] Shekar KC, Prasad BA, Prasad NE. Procedia Mater. Sci. 2014, 6, 1336–1343.10.1016/j.mspro.2014.07.112Suche in Google Scholar
[24] Koohbor B, Mallon S, Kidane A, Sutton MA. Compos. Part B 2014, 66, 388–399.10.1016/j.compositesb.2014.05.022Suche in Google Scholar
[25] Lu G, Sun L, Matveev MY, Jones AI. Procedia Eng. 2015, 99, 349–352.10.1016/j.proeng.2014.12.546Suche in Google Scholar
[26] Liu Y, Zhu J, Chen Z, Jiang Y. Ceram. Int. 2012, 38, 4245–4251.10.1016/j.ceramint.2012.01.083Suche in Google Scholar
[27] Liu Y, Zhu J, Chen Z, Jiang Y, Li B, Lin L, Guan T, Cong X, Li C. Mater. Sci. Eng. A 2012, 532, 230–235.10.1016/j.msea.2011.10.084Suche in Google Scholar
[28] Liu Y, Zhu J, Chen Z, Jiang Y, Li C, Li B, Lin L, Guan T, Chen Z. Ceram. Int. 2012, 38, 795–800.10.1016/j.ceramint.2011.08.006Suche in Google Scholar
[29] Ahmed KS, Vijayarangan S. J. Mater. Process. Technol. 2008, 207, 330–335.10.1016/j.jmatprotec.2008.06.038Suche in Google Scholar
[30] Xu H, Zhang L, Cheng L. Mater. Des. 2015, 67, 428–435.10.1016/j.matdes.2014.11.061Suche in Google Scholar
[31] Cai Y, Xu Y, Li B, Fan S, Zhang L, Cheng L, Dong B, Jiang J. Mater. Sci. Eng.: A 2008, 497, 278–282.10.1016/j.msea.2008.07.011Suche in Google Scholar
[32] Qi G, Zhang C, Hu H. Ceram. Int. 2007, 33, 891–894.10.1016/j.ceramint.2006.01.018Suche in Google Scholar
[33] Ji A, Cui H, Li H, Cheng W, Ji L. New Carbon Mater. 2011, 26, 109–116.10.1016/S1872-5805(11)60070-XSuche in Google Scholar
©2017 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Original articles
- Pulverization of end-of-life tires by ultra-high pressure water jet process
- Tribological behavior and morphology of PTFE particulate-reinforced POM matrix composites
- Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends
- Bulk cure study of nanoclay filled epoxy glass fiber reinforced composite material
- Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends
- Comparison of material properties in butt welds of used and unused polyethylene pipes for natural gas distribution
- Enhancing the potential of employing thermosetting powder recyclates as filler in LLDPE by structural modifications
- Micro-roughening of polyamide fabric using protease enzyme for improving adhesion strength of rubber-polyamide composite
- The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
- Preparation and characterization of anti-fouling PVDF membrane modified by chitin
Artikel in diesem Heft
- Frontmatter
- Original articles
- Pulverization of end-of-life tires by ultra-high pressure water jet process
- Tribological behavior and morphology of PTFE particulate-reinforced POM matrix composites
- Effect of the matrix plasticization behavior on mechanical properties of PVC/ABS blends
- Bulk cure study of nanoclay filled epoxy glass fiber reinforced composite material
- Improvement of interlaminar shear strength of 2.5D fabric laminated composites with short-cut web interlayer
- Optimizing of vented injection molding on mechanical performance and miscibility of recycled poly(ethylene terephthalate) and polycarbonate blends
- Comparison of material properties in butt welds of used and unused polyethylene pipes for natural gas distribution
- Enhancing the potential of employing thermosetting powder recyclates as filler in LLDPE by structural modifications
- Micro-roughening of polyamide fabric using protease enzyme for improving adhesion strength of rubber-polyamide composite
- The real time optical transmittance of swollen heterogeneous natural rubber/poly (ethylene-co-vinyl acetate) blends
- Preparation and characterization of anti-fouling PVDF membrane modified by chitin