Study on the effect of virgin and recycled chloroprene rubber (vCR and rCR) on the properties of natural rubber/chloroprene rubber (NR/CR) blends
-
Siti Z. Salleh
und
Zulkifli Ahmad
Abstract
The effects of various ratios of virgin chloroprene rubber (vCR) and recycled chloroprene rubber (rCR) with a constant content of carbon black (CB) on the properties of natural rubber/chloroprene rubber NR/CR blends were studied. The minimum torque (ML), maximum torque (MH), scorch time, and cure time increased with the addition of both CRs and the effects of rCR were more pronounced than vCR on these properties. The tensile strength and fatigue life of the NR/vCR blends increased with an addition of vCR up to 25 phr and then decreased with a higher vCR. However, NR/rCR blends reflected otherwise for both properties. The elongation at break and swelling percentage of NR/CR blends decreased with the addition of both vCR and rCR.
The author (S.Z. Salleh) would like to thank the Ministry of Higher Education (MOHE), Malaysia for financial support under MyBrain15 (MyPhD).
References
[1] George SE, Ninan KN, Groeningckx G, Thomas S. J. Appl. Polym. Sci. 2000, 78, 1280–1303.Suche in Google Scholar
[2] Therattil SJ, Kuzhuppully AA, Joseph R. Iranian Polym. J., 2008, 17, 419–430.Suche in Google Scholar
[3] Ismail H, Suzaimah S. Polym.-Plast. Technol. Eng. 2000, 39, 817–827.Suche in Google Scholar
[4] Ismail H, Poh BT. Polym.-Plast. Technol. Eng. 2001, 40, 451–462.Suche in Google Scholar
[5] Ismail H, Poh BT. Eur. Polym. J. 2000, 36, 2403–2408.Suche in Google Scholar
[6] Ismail H, Hairunezam HM. Eur. Polym. J. 2001, 37, 39–44.Suche in Google Scholar
[7] Elnaz E, Ghasem N, Mir Hamid RG, Gholam Reza B. J. Polym. Eng. 2011, 31, 83–92.Suche in Google Scholar
[8] Jaya Madhu R, Abdullah Mohammad Ali MA, Malavalli Nagarajaih C, Puttegowda R, Harijan Basawaraju R, Chikkakuntappa R. J. Polym. Eng. 2011, 31, 93–96.Suche in Google Scholar
[9] Chikkakuntappa R. J. Polym. Eng. 2011, 31, 97–103.Suche in Google Scholar
[10] Ismaeel MA, Azman H. J. Polym. Eng. 2013, 33, 229–238.Suche in Google Scholar
[11] Arayapranee W, Rempel GL. Int. J. Mater. Struct. Reliab. 2007, 5, 1–12.Suche in Google Scholar
[12] Nabil H, Ismail H, Azura AR. Polym. Test. 2013, 32, 385–393.Suche in Google Scholar
[13] Nabil H, Ismail H, Azura AR. J. Vinyl Addit. Technol. 2012, 139–146.10.1002/vnl.20291Suche in Google Scholar
[14] Noriman NZ, Ismail H. Mater. Design 2011, 32, 3336–3346.10.1016/j.matdes.2011.02.020Suche in Google Scholar
[15] Sascha Peters. Material Revolution Sustainable and Multi-Purpose Materials for Design and Architecture, 2nd ed., Birkhauser Publication: Basel, 2011.10.1515/9783034610773Suche in Google Scholar
[16] Noriman NZ, Ismail H, Rashid AA. Polym.–Plast. Tech. Eng. 2010, 49, 731–741.Suche in Google Scholar
[17] Noriman NZ, Ismail H, Rashid AA. Adv. Polym. Technol. 2012, 31, 100–108.Suche in Google Scholar
[18] Noriman NZ, Ismail H. Polym.–Plast. Tech. Eng. 2012, 51, 350–357.Suche in Google Scholar
[19] Noriman NZ, Ismail H. J. App. Polym. Sci. 2012, 124, 19–27.Suche in Google Scholar
[20] Nabil H, Ismail H, Azura AR. Mater. Design 2013, 50, 27–37.10.1016/j.matdes.2013.02.086Suche in Google Scholar
[21] Ismail H, Leong HC. Polym. Test. 2001, 20, 509–516.Suche in Google Scholar
[22] Ismail H, Ho CL, Lim CC. Polym-Plast. Tech. Eng. 2001, 40, 505–517.Suche in Google Scholar
[23] Sae-Oui P, Sirisinha C, Hatthapanit K. eXPRESS Polym. Lett. 2007, 1, 8–14.Suche in Google Scholar
[24] Khalil A, Shaikh Sirajuddin N, Nudrat Zahid Ra, Khaula S. Adv. Mater. Phys. Chem. 2012, 2, 90–97.Suche in Google Scholar
[25] Paul DR, Bucknall CR. Polymer Blends, John Wiley & Sons Inc.: New York, 2000.Suche in Google Scholar
[26] Zhang P, Huang G, Liu Z. J. Appl. Polym. Sci. 2009, 111, 673–679.Suche in Google Scholar
[27] Das A, Ghosh AK, Basu AK. Testing and Measurement 2005, 58, 230–238.Suche in Google Scholar
[28] Chapman AV, Thinker AJ. Elastomere Kunststoffe (Elastomeres and Plastics) KGK, Kautsch. Gummi Kunstst. 2003, 56, 533–544.Suche in Google Scholar
[29] Clarke J, Clarke B, Freakley PK, Sutherland I. Plast. Rubber Compos. 2001, 30, 39–44.Suche in Google Scholar
[30] Mallick A, Bhattacharya AK, Gupta BR, Tripathy DK, De SK. J. Appl. Polym. Sci. 1997, 65, 135–142.Suche in Google Scholar
[31] Choi S-S. J. Appl. Polym. Sci. 2002, 83, 2609–2616.Suche in Google Scholar
[32] Das A, Debnath SC, De D, Basu DK. J. Appl. Polym. Sci. 2004, 93, 196–200.Suche in Google Scholar
[33] Sae-Oui P, Sirisinha C, Hatthapanit K, Phewthongin N. J. Appl. Polym. Sci. 2008, 110, 2763–2769.Suche in Google Scholar
[34] Chokanandsombat Y, Sirisinha C. J. Appl. Polym. Sci. 2012, 128, 2533–2540.Suche in Google Scholar
[35] Li S, Lamminmak J, Hanhi K. Polym. Eng. Sci. 2005, 45, 1239–1246.Suche in Google Scholar
[36] Noriman NZ, Ismail H, Rashid A. Polym.-Plast. Technol. Eng. 2008, 47, 1016–1023.Suche in Google Scholar
[37] Li S, Lamminmak J, Hanhi K. Macromol. Symp. 2004, 216, 209–216.Suche in Google Scholar
[38] Kumnuantip C, Sombatsompop N. Annual Technical Conference, Massachusetts, USA, May 1–5, 2005.Suche in Google Scholar
[39] Sreeja TD, Kutty SKN. Polym.-Plast. Technol. Eng. 2000, 39, 501–512.Suche in Google Scholar
[40] Sombatsompop N, Kumnuantip C. J. Appl. Polym. Sci. 2003, 87, 1723–1731.Suche in Google Scholar
©2013 by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Masthead
- Masthead
- Original articles
- Solvent-initiator compatibility and sensitivity of conversion of styrene homo-polymerization
- Synthesis and effect of secondary dopant on the conductivity of conducting polymer polyaniline
- Potential utilization of recycled PET in comparison with liquid crystalline polymer as an additive for HDPE based composite fibers: Comparative investigation on mechanical performance of cross-ply laminates
- Study on the effect of virgin and recycled chloroprene rubber (vCR and rCR) on the properties of natural rubber/chloroprene rubber (NR/CR) blends
- Synthesis of a novel silicone based copolymeric surfactant and application in emulsion polymerization
- Post-irradiation effects on gamma-irradiated nylon 6,12 fibers
- Preparation and properties of sodium alginate films
- Study on crystallization and compatibility of nitrile butadiene rubber (NBR)/polyoxymethlene (POM) blends modified by a polyether polyol
- Polyamide grafting onto ethylene-vinyl alcohol copolymer
- Acoustic parameter investigation of polyvinyl acetate with acetic acid using ultrasonic technique
- Electrospun cellulosic structure nanofibre based on rice straw
- Function of silicon oil in the castor oil based rigid polyurethane foams
Artikel in diesem Heft
- Masthead
- Masthead
- Original articles
- Solvent-initiator compatibility and sensitivity of conversion of styrene homo-polymerization
- Synthesis and effect of secondary dopant on the conductivity of conducting polymer polyaniline
- Potential utilization of recycled PET in comparison with liquid crystalline polymer as an additive for HDPE based composite fibers: Comparative investigation on mechanical performance of cross-ply laminates
- Study on the effect of virgin and recycled chloroprene rubber (vCR and rCR) on the properties of natural rubber/chloroprene rubber (NR/CR) blends
- Synthesis of a novel silicone based copolymeric surfactant and application in emulsion polymerization
- Post-irradiation effects on gamma-irradiated nylon 6,12 fibers
- Preparation and properties of sodium alginate films
- Study on crystallization and compatibility of nitrile butadiene rubber (NBR)/polyoxymethlene (POM) blends modified by a polyether polyol
- Polyamide grafting onto ethylene-vinyl alcohol copolymer
- Acoustic parameter investigation of polyvinyl acetate with acetic acid using ultrasonic technique
- Electrospun cellulosic structure nanofibre based on rice straw
- Function of silicon oil in the castor oil based rigid polyurethane foams
