Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: mechanical, thermal and morphological properties
-
Suhailah Mohd Sukri
,
Abdul Razak Rahmat
Abstract
The objective of this work was to investigate the effect of kenaf contents on mechanical, thermal and morphological properties of recycled polyamide-6 (rPA-6)/recycled polypropylene (rPP) blends. Kenaf was used to enhance the properties of composites. Alkali treating of kenaf by sodium hydroxide (NaOH) and combination with propylene grafted maleic anhydride (PPgMA) as a compatibilizer produced good adhesion both between rPP and rPA-6, and rPA-6/rPP and kenaf. Tensile, flexural and Izod impact tests were evaluated to study the mechanical properties. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) tests were carried out to investigate thermal properties. Scanning electron microscopy (SEM) was performed for morphological analysis. Generally, the mechanical properties were successfully enhanced, especially Young’s modulus, flexural modulus, flexural strength and elongation at break, while there were some problems which caused the tensile strength and impact strength to be inferior. Thermal analysis showed that the crystallization of composites decreased as kenaf contents were increased. SEM showed a problem with kenaf and rPP/rPA-6 compatibility, which led to insufficient matrix at some places and agglomeration of kenaf at other places. Morphologically, there was unidirectional presence of kenaf in rPP main composites and random orientation in rPA-6 main composites.
©2012 by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Masthead
- Masthead
- Masthead
- Original Articles
- Evaluation of factors and kinetics study of polyacrylamide redox polymerization using statistical design modeling
- Gel filtration chromatography analysis and modeling the process of pullulan depolymerization
- Polystyrene–organoclay nanocomposites produced by in situ activators regenerated by electron transfer for atom transfer radical polymerization
- Viscoelasticity in thermoforming
- Melt extrudate swell behavior of polypropylene composites filled with hollow glass beads
- Viscosity and domain morphology in binary immiscible blends of poly(trimethylene terephthalate) and polyamide6,10
- Effect of poly (methyl methacrylate)-grafted-talc content on mechanical properties and thermal degradation of poly (vinyl chloride) composites
- Fabrication and properties of poly(L-lactide)/hydroxyapatite/chitosan fiber ternary composite scaffolds for bone tissue engineering
- Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: mechanical, thermal and morphological properties
- Effect of gamma radiation and bulk monomer on jute fabrics polyethylene/polyvinyl chloride composites
- Investigation of fracture toughness parameters of epoxy nanocomposites for different crack angles
- Influence of X-ray opaque BaSO4 nanoparticles on the mechanical, thermal and rheological properties of polyoxymethylene nanocomposites
Artikel in diesem Heft
- Masthead
- Masthead
- Masthead
- Original Articles
- Evaluation of factors and kinetics study of polyacrylamide redox polymerization using statistical design modeling
- Gel filtration chromatography analysis and modeling the process of pullulan depolymerization
- Polystyrene–organoclay nanocomposites produced by in situ activators regenerated by electron transfer for atom transfer radical polymerization
- Viscoelasticity in thermoforming
- Melt extrudate swell behavior of polypropylene composites filled with hollow glass beads
- Viscosity and domain morphology in binary immiscible blends of poly(trimethylene terephthalate) and polyamide6,10
- Effect of poly (methyl methacrylate)-grafted-talc content on mechanical properties and thermal degradation of poly (vinyl chloride) composites
- Fabrication and properties of poly(L-lactide)/hydroxyapatite/chitosan fiber ternary composite scaffolds for bone tissue engineering
- Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: mechanical, thermal and morphological properties
- Effect of gamma radiation and bulk monomer on jute fabrics polyethylene/polyvinyl chloride composites
- Investigation of fracture toughness parameters of epoxy nanocomposites for different crack angles
- Influence of X-ray opaque BaSO4 nanoparticles on the mechanical, thermal and rheological properties of polyoxymethylene nanocomposites
