Melt extrudate swell behavior of polypropylene composites filled with hollow glass beads
-
Ji-Zhao Liang
und
Ming-Qiang Zhong
Abstract
Polypropylene (PP) composites filled with hollow glass beads (HGB) were prepared by means of a twin-screw extruder. The extrudate swell ratio (B) of the PP/HGB composite melts was measured using a melt flow indexer under experimental conditions, with temperatures from 190°C to 230°C and loads varying from 1.20 kg to 7.50 kg, to identify the effects of the extrusion conditions and the particle size and content on the extrudate swell of composite melts. The results showed that the value of B of the composites increased nonlinearly with an increase of shear stress, while it decreased linearly with a rise of temperature. When the load and temperature were constant, the value of B increased nonlinearly with an increase of the HGB diameter, whereas it reduced nonlinearly with an increase of the HGB volume fraction. This should be attributed to the elastic deformation energy stored in the flow of the composite melts, which was decreased with an increase of the HGB number and content.
©2012 by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Masthead
- Masthead
- Masthead
- Original Articles
- Evaluation of factors and kinetics study of polyacrylamide redox polymerization using statistical design modeling
- Gel filtration chromatography analysis and modeling the process of pullulan depolymerization
- Polystyrene–organoclay nanocomposites produced by in situ activators regenerated by electron transfer for atom transfer radical polymerization
- Viscoelasticity in thermoforming
- Melt extrudate swell behavior of polypropylene composites filled with hollow glass beads
- Viscosity and domain morphology in binary immiscible blends of poly(trimethylene terephthalate) and polyamide6,10
- Effect of poly (methyl methacrylate)-grafted-talc content on mechanical properties and thermal degradation of poly (vinyl chloride) composites
- Fabrication and properties of poly(L-lactide)/hydroxyapatite/chitosan fiber ternary composite scaffolds for bone tissue engineering
- Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: mechanical, thermal and morphological properties
- Effect of gamma radiation and bulk monomer on jute fabrics polyethylene/polyvinyl chloride composites
- Investigation of fracture toughness parameters of epoxy nanocomposites for different crack angles
- Influence of X-ray opaque BaSO4 nanoparticles on the mechanical, thermal and rheological properties of polyoxymethylene nanocomposites
Artikel in diesem Heft
- Masthead
- Masthead
- Masthead
- Original Articles
- Evaluation of factors and kinetics study of polyacrylamide redox polymerization using statistical design modeling
- Gel filtration chromatography analysis and modeling the process of pullulan depolymerization
- Polystyrene–organoclay nanocomposites produced by in situ activators regenerated by electron transfer for atom transfer radical polymerization
- Viscoelasticity in thermoforming
- Melt extrudate swell behavior of polypropylene composites filled with hollow glass beads
- Viscosity and domain morphology in binary immiscible blends of poly(trimethylene terephthalate) and polyamide6,10
- Effect of poly (methyl methacrylate)-grafted-talc content on mechanical properties and thermal degradation of poly (vinyl chloride) composites
- Fabrication and properties of poly(L-lactide)/hydroxyapatite/chitosan fiber ternary composite scaffolds for bone tissue engineering
- Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: mechanical, thermal and morphological properties
- Effect of gamma radiation and bulk monomer on jute fabrics polyethylene/polyvinyl chloride composites
- Investigation of fracture toughness parameters of epoxy nanocomposites for different crack angles
- Influence of X-ray opaque BaSO4 nanoparticles on the mechanical, thermal and rheological properties of polyoxymethylene nanocomposites
