Startseite Fabrication and wear performance of M7C3 carbide reinforced epoxy composites
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Fabrication and wear performance of M7C3 carbide reinforced epoxy composites

  • Serdar Osman Yilmaz

    Prof. Dr. Serdar Osman Yilmaz, born in Elazig in 1966, works at the Namık Kemal University, Faculty of Engineering, Department of Mechanical Engineering, Corlu, Tekirdağ, Türkiye. He received his BSc from METU University, Ankara, Faculty of Engineering, Metallurgy and Materials Engineering Department in 1989, his MSc from the Institute of Science and Technology, Metallurgy Department in 1992 and his PhD from the Firat University, Institute of Science and Technology, Metallurgy Department, Elazig in 1998. He studied welding technologies, material surface treatments, material process and microstructure control, casting and wear.

    , Tanju Teker

    Prof. Dr. Tanju Teker, born in Sivas, works in Sivas Cumhuriyet University, Faculty of Technology, Department of Manufacturing Engineering, Sivas, Türkiye. He graduated in Metallurgy Education from Gazi University, Ankara, Türkiye, in 1997. He received his MSc and PhD degrees from Firat University, Elazig, Türkiye in 2004 and 2010, respectively. His research interests casting, welding technologies, material surface treatments, material process and microstructure control.

    EMAIL logo
    , Sercan Kavak

    Sercan Kavak was born in Batman in 1996. He graduated from Namık Kemal University, Faculty of Engineering, Department of Mechanical Engineering, Corlu, Tekirdağ, Türkiye, in 2016. He received his MSc degrees from Namık Kemal University, Corlu, Tekirdağ, Türkiye. He studied composite and wear.

    und Alper Karakoca

    Alper Karakoca, born in Manisa in 1990, works in Tekirdag Namık Kemal University, Faculty of Engineering, Department of Mechanical Engineering, Tekirdag, Turkey. He graduated in Mechanical Engineering from Istanbul Technical University, Istanbul, Turkey, in 2013. He received his MSc degrees from Tekirdag Namik Kemal University, Tekirdag, Turkey, in 2017. His research interests aluminum cast alloys, thermomechanical processes.

    ORCID logo
Veröffentlicht/Copyright: 23. Januar 2025
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

The role of materials in industrial engineering has become even more important today. Various methods are used to develop materials with desired properties. Cr7C3 carbide and grease oil reinforced epoxy-based matrix composites were produced. Microscopic analysis of the composites was carried out by SEM. The differences in the wear properties of the composites were investigated in dry sliding wear test. Increasing sliding speed and load increased the wear of the composites. Combining Cr7C3 with epoxy resulted in improved wear performance. The higher the chromium carbide level increased the coefficient of friction. The best wear resistance result was obtained from 75 wt.% chromium carbide reinforced composite. The change in wear resistance varied significantly depending on the epoxy resin ratio and the amount of reinforcement.


Corresponding author: Tanju Teker, Sivas Cumhuriyet University, Faculty of Technology, Department of Manufacturing Engineering, 58140, Sivas, Türkiye, E-mail:

About the authors

Serdar Osman Yilmaz

Prof. Dr. Serdar Osman Yilmaz, born in Elazig in 1966, works at the Namık Kemal University, Faculty of Engineering, Department of Mechanical Engineering, Corlu, Tekirdağ, Türkiye. He received his BSc from METU University, Ankara, Faculty of Engineering, Metallurgy and Materials Engineering Department in 1989, his MSc from the Institute of Science and Technology, Metallurgy Department in 1992 and his PhD from the Firat University, Institute of Science and Technology, Metallurgy Department, Elazig in 1998. He studied welding technologies, material surface treatments, material process and microstructure control, casting and wear.

Tanju Teker

Prof. Dr. Tanju Teker, born in Sivas, works in Sivas Cumhuriyet University, Faculty of Technology, Department of Manufacturing Engineering, Sivas, Türkiye. He graduated in Metallurgy Education from Gazi University, Ankara, Türkiye, in 1997. He received his MSc and PhD degrees from Firat University, Elazig, Türkiye in 2004 and 2010, respectively. His research interests casting, welding technologies, material surface treatments, material process and microstructure control.

Sercan Kavak

Sercan Kavak was born in Batman in 1996. He graduated from Namık Kemal University, Faculty of Engineering, Department of Mechanical Engineering, Corlu, Tekirdağ, Türkiye, in 2016. He received his MSc degrees from Namık Kemal University, Corlu, Tekirdağ, Türkiye. He studied composite and wear.

Alper Karakoca

Alper Karakoca, born in Manisa in 1990, works in Tekirdag Namık Kemal University, Faculty of Engineering, Department of Mechanical Engineering, Tekirdag, Turkey. He graduated in Mechanical Engineering from Istanbul Technical University, Istanbul, Turkey, in 2013. He received his MSc degrees from Tekirdag Namik Kemal University, Tekirdag, Turkey, in 2017. His research interests aluminum cast alloys, thermomechanical processes.

Acknowledgments

The authors were grateful to Kayalar Copper Industry and Trade Incorporated Company for their assistance in conducting the experiments.

  1. Research ethics: Not applicable.

  2. Informed consent: Not applicable.

  3. Author contributions: The author has accepted responsibility for the entire content of this submitted manuscript and approved submission.

  4. Use of Large Language Models, AI and Machine Learning Tools: None declared.

  5. Conflict of interest: The authors state no conflict of interest.

  6. Research funding: No funding was received.

  7. Data availability: Not applicable.

References

[1] A. Shalwan and B. F. Yousif, “Influence of date palm fibre and graphite filler on mechanical and wear characteristic of epoxy composite,” Mater. Des., vol. 59, pp. 264–273, 2014, https://doi.org/10.1016/j.matdes.2014.02.066.Suche in Google Scholar

[2] R. Baptista, A. Mendão, F. Rodrigues, C. G. Figueiredo-Pina, M. Guedes, and R. Marat-Mendes, “Effect of high graphite filler contents on the mechanical and tribological failure behavior of epoxy matrix composites,” Theor. Appl. Fract. Mech., vol. 85, no. Part A, pp. 113–124, 2016, https://doi.org/10.1016/j.tafmec.2016.08.013.Suche in Google Scholar

[3] V. K. Srivastava and A. Verma, “Mechanical behaviour of copper and aluminium particles reinforced epoxy resin composites,” Am. J. Mater. Sci., vol. 5, no. 4, pp. 84–89, 2015, https://doi.org/10.5923/j.materials.20150504.02.Suche in Google Scholar

[4] H. Ku, H. Wang, N. Pattarachaiyakoop, and M. Trada, “A review on the tensile properties of natural fiber reinforced polymer composites,” Compos. B Eng., vol. 42, no. 4, pp. 856–873, 2011, https://doi.org/10.1016/j.compositesb.2011.01.010.Suche in Google Scholar

[5] S. Singh, P. Kumar, and S. K. Jain, “An experimental and numerical investigation of mechanical properties of glass fiber reinforced epoxy composites,” Adv. Mater. Lett., vol. 4, no. 7, pp. 567–572, 2013, https://doi.org/10.5185/amlett.2012.11475.Suche in Google Scholar

[6] J. Abenojar, J. C. Del Real, M. A. Martinez, and M. Cano De Santayana, “Effect of silane treatment on SiC particles used as reinforcement in epoxy resins,” J. Adhes., vol. 85, no. 6, pp. 287–301, 2009, https://doi.org/10.1080/00218460902880131.Suche in Google Scholar

[7] J. Abenojar, M. A. Martinez, F. Velasco, and J. C. Del Real, “Effect of moisture and temperature on the mechanical properties of an epoxy reinforced with boron carbide,” J. Adhes. Sci. Technol., vol. 25, no. 18, pp. 2445–2460, 2011, https://doi.org/10.1163/016942411X580135.Suche in Google Scholar

[8] C. Vivekanandhan and P. S. Sampath, “Effect of nanoclay on the mechanical behavior of epoxy composites,” Mater. Test., vol. 58, no. 10, pp. 903–907, 2016, https://doi.org/10.3139/120.110937.Suche in Google Scholar

[9] D. D. Rodrigues and J. G. Broughton, “Silane surface modification of boron carbide in epoxy composites,” Int. J. Adhes. Adhes., vol. 46, pp. 62–73, 2013, https://doi.org/10.1016/j.ijadhadh.2013.05.014.Suche in Google Scholar

[10] M. Sudheer, R. Prabhu, K. Raju, and T. Bhat, “Effect of filler content on the performance of epoxy/PTW composites,” Adv. Mater. Sci. Eng., vol. 1, p. 970468, 2014, https://doi.org/10.1155/2014/970468.Suche in Google Scholar

[11] A. Patnaik, A. Satapathy, S. S. Mahapatra, and R. R. Dash, “A comparative study on different ceramic fillers affecting mechanical properties of glass—polyester composites,” J. Reinf. Plast. Compos., vol. 28, no. 11, pp. 1305–1318, 2009, https://doi.org/10.1177/0731684407086.Suche in Google Scholar

[12] T. Ø. Larsen, T. L. Andersen, B. Thorning, and M. E. Vigild, “The effect of particle addition and fibrous reinforcement on epoxy-matrix composites for severe sliding conditions,” Wear, vol. 264, nos. 9–10, pp. 857–868, 2008, https://doi.org/10.1016/j.wear.2006.12.078.Suche in Google Scholar

[13] M. Yan, et al.., “Mechanism of matrix influencing the cryogenic mechanical property of carbon fibre reinforced epoxy resin composite,” Compos. Commun., vol. 33, p. 101220, 2022, https://doi.org/10.1016/j.coco.2022.101220.Suche in Google Scholar

[14] A. Imani, et al.., “Wear and friction of epoxy-based nanocomposites with silica nanoparticles and wax-containing microcapsules,” Compos. A: Appl. Sci. Manuf., vol. 107, pp. 607–615, 2018, https://doi.org/10.1016/j.compositesa.2018.01.033.Suche in Google Scholar

[15] R. Hanumantharaya, N. L. Vaishak, M. B. Davanageri, J. D. Quadros, and B. G. Premkumar, “Mechanical and tribological wear behavior of epoxy hybrid composites,” Mater. Today: Proc., vol. 5, no. 2, pp. 7947–7953, 2018, https://doi.org/10.1016/j.matpr.2017.11.477.Suche in Google Scholar

[16] O. Jacobs, W. Xu, B. Schädel, and W. Wu, “Wear behaviour of carbon nanotube reinforced epoxy resin composites,” Tribol. Lett., vol. 23, no. 1, pp. 65–75, 2006, https://doi.org/10.1007/s11249-006-9042-7.Suche in Google Scholar

[17] U. Maitra, K. E. Prasad, U. Ramamurty, and C. N. R. Rao, “Mechanical properties of nanodiamond-reinforced polymer-matrix composites,” Solid State Commun., vol. 149, nos. 39–40, pp. 1693–1697, 2009, https://doi.org/10.1016/j.ssc.2009.06.017.Suche in Google Scholar

[18] V. J. J. Prasad and S. Kumar, “A review of recent developments in natural fiber composites and their mechanical, thermal & machinabilty properties,” Adv. Mater. Res., vol. 1148, pp. 61–71, 2018, https://doi.org/10.4028/www.scientific.net/AMR.1148.61.Suche in Google Scholar

[19] J. Abenojar, M. A. Martínez, F. Velasco, V. Pascual-Sánchez, and J. M. Martín-Martínez, “Effect of boron carbide filler on the curing and mechanical properties of an epoxy resin,” J. Adhes., vol. 85, pp. 216–238, 2009, https://doi.org/10.1080/00218460902881782.Suche in Google Scholar

[20] D. Huelsbusch, S. Mrzljak, and F. Walther, “In situ computed tomography for the characterization of the fatigue damage development in glass fiber-reinforced polyurethane,” Mater. Test., vol. 61, no. 9, pp. 821–828, 2019, https://doi.org/10.3139/120.111389.Suche in Google Scholar

[21] S. O. Eruslu, “Finite element modeling of glass particle reinforced epoxy composites under uniaxial compression and sliding wear,” Mater. Test., vol. 63, no. 7, pp. 645–653, 2021, https://doi.org/10.1515/mt-2020-0106.Suche in Google Scholar

[22] A. Azam, A. Dorgham, P. Parsaeian, A. Morina, A. Neville, and M. C. Wilson, “The mutual interaction between tribochemistry and lubrication: interfacial mechanics of tribofilm,” Tribol. Int., vol. 135, pp. 161–169, 2019, https://doi.org/10.1016/j.triboint.2019.01.024.Suche in Google Scholar

[23] E. Cortés-Triviño, C. Valencia, M. A. Delgado, and J. M. Franco, “Thermo-rheological and tribological properties of novel bio-lubricating greases thickened with epoxidized lignocellulosic materials,” J. Ind. Eng. Chem., vol. 80, pp. 626–632, 2019, https://doi.org/10.1016/j.jiec.2019.08.052.Suche in Google Scholar

[24] M. F. Uddin and C. T. Sun, “Strength of unidirectional glass/epoxy composite with silica nanoparticle-enhanced matrix,” Compos. Sci. Technol., vol. 68, pp. 1637–1643, 2008, https://doi.org/10.1016/j.compscitech.2008.02.026.Suche in Google Scholar

[25] O. Asi, “Mechanical properties of glass-fiber reinforced epoxy composites filled with Al2O3 particles,” J. Reinf. Plast. Compos., vol. 28, no. 23, pp. 2861–2867, 2009, https://doi.org/10.1177/0731684408093975.Suche in Google Scholar

[26] S. Bhatia, S. Angra, and S. Khan, “A review on mechanical and tribological characterization of boron carbide reinforced epoxy composite,” Adv. Compos. Mater., vol. 30, no. 4, pp. 307–337, 2021, https://doi.org/10.1080/09243046.2020.Suche in Google Scholar

Published Online: 2025-01-23
Published in Print: 2025-03-26

© 2025 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Influence of heat input and heat exchange coefficient on temperature and stress field of a X80 steel pipeline repair-weld root pass of a type-B sleeve
  3. Optimization of stress-relief heat treatment for overlay weld repair of severely used rail tracks: effects on residual stress, microstructure and wear resistance
  4. Investigation on the axial distribution of micron inclusions and their influence on mechanical properties in a wind power spindle
  5. Influence of aerogel powder on the mechanical and stability properties of photocurable resin composites produced by stereolithography (SLA)
  6. Effect of sandblasting and aging on structural and mechanical properties of Inconel 625 coated steels for marine applications
  7. Mechanical characterization of sandwich composite structures with Alumix231 foam core between Al2024/B4C composite plates
  8. Optimization of alkali modified breadfruit peel flour-LDPE composite for car mirror casings
  9. Influence of seawater condition on shear strength of CFRP single lap bonded joints with various fiber orientation
  10. Comparative analysis of cutting methods and their impact on fatigue properties of armor steel
  11. Effect of pore structure, mechanical performance, and operational temperature on damping behavior of thermal expandible rubber-based adhesives
  12. Structural and electrical properties of CuO-doped NaNbO3 ceramics
  13. Friction and wear behavior of alkali-treated corn husk fiber reinforced polyester composites
  14. Performance of high strength natural fiber reinforced hybrid composites for structural engineering applications
  15. Fabrication and wear performance of M7C3 carbide reinforced epoxy composites
  16. Mosaic ceramic surface defect detection enhancement algorithm based on guided filter and multi-scale fusion
Heruntergeladen am 21.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/mt-2024-0390/html
Button zum nach oben scrollen