Hydrovisbreaking of vacuum residue from Russian Export Blend: influence of brown coal, light cycle oil, or naphtha addition
-
José Miguel Hidalgo-Herrador
,
Aleš Vráblík
Abstract
Demand for high-value petroleum products is increasing and crude oils and their distillation products are becoming heavier. The thermal cracking of a vacuum residue (VR) from REB (Russian Export Blend) crude oil was carried out in an autoclave. LCO (light cycle oil), naphtha, and brown coal (BC) were added with the aim of studying their effect on the final products composition. The elemental analysis (%C, %N, %H, %S) was performed and dynamic viscosity, density, GC of gases (“Refinery Gas Analysis”), solubility in hexane and toluene, and simulated distillation were examined in raw materials, gaseous, and liquid products. As anticipated, due to its high aromatics content, the addition of LCO proved the best option, obtaining the highest yield of lighter liquids. The naphtha addition resulted in a slight increment of heavier products in the gaseous phase and higher yields to solids. The literature does not contain any extensive studies of the addition of BC to VR in the hydrovisbreaking process. The addition of BC resulted in an increment in the yield of the gaseous product and assumed the highest relative total consumption of hydrogen during the reaction.
References
Ahmaruzzaman, M., & Sharma, D. K. (2008). Characterization of liquid products obtained from co-cracking of petroleum vacuum residue with coal and biomass. Journal of Analytical and Applied Pyrolysis, 81, 37-44. DOI: 10.1016/j.jaap.2007.08.001.10.1016/j.jaap.2007.08.001Suche in Google Scholar
ASTM International (2010). ASTM standard: Standard test methods for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants. ASTM D5291. West Conshohocken, PA, USA.Suche in Google Scholar
ASTM International (2012). ASTM standard: Standard test method for ASTM color of petroleum products (ASTM color scale). ASTM D1500. West Conshohocken, PA, USA.Suche in Google Scholar
Benito, A. M., Martínez, M. T., Fernández, I., & Miranda, J. L. (1995). Visbreaking of an asphaltenic coal residue. Fuel, 74, 922-927. DOI: 10.1016/0016-2361(95)00013-u.10.1016/0016-2361(95)00013-USuche in Google Scholar
Carrillo, J. A., Pantoja, F., Garzón, G., Barrios, H., Fernández, J., Carmonan, E., & Saavedra, J. (2000). Control of severity in visbreaking. Fuel Preprints, 45-3, 617-622. Washington, DC, USA: ACS Energy and Fuels Division.Suche in Google Scholar
Carrillo, J. A., & Corredor, L. M. (2013). Upgrading of heavy crude oils: Castilla. Fuel Processing Technology, 109, 156-162. DOI: 10.1016/j.fuproc.2012.09.059.10.1016/j.fuproc.2012.09.059Suche in Google Scholar
Castañeda, L. C., Muñoz, J. A. D., & Ancheyta, J. (2011). Comparison of approaches to determine hydrogen consumption during catalytic hydrotreating of oil fractions. Fuel, 90, 3593-3601. DOI: 10.1016/j.fuel.2010.11.047.10.1016/j.fuel.2010.11.047Suche in Google Scholar
CEN (2010). European standard: Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus. EN 13220:2010. Brussels, Belgium.Suche in Google Scholar
Choi, B. C., Gross, B., & Malladi, M. (1986). US Patent No. 4615791. Washington, DC, USA: U.S. Patent and Trademark Office.Suche in Google Scholar
Emam, E. A. (2013). Clays as catalysts in petroleum refining industry. ARPN Journal of Science and Technology, 3, 356-375.Suche in Google Scholar
Gray, R. M. (1994). Upgrading petroleum residues and heavy oils. New York, NY, USA: Marcel Dekker.10.1201/9781482277623Suche in Google Scholar
Hossain, M., Kitaguchi, T., Sato, Y., Tago, T., & Masuda, T. (2010). Heavy oil upgrading in supercritical water using iron based catalyst. In 20th Annual Saudi-Japan Catalysts Symposium on “Catalysts in Petroleum Refining & Petrochemicals”, December 5-6, 2010. Dhahran, Saudi Arabia: King Fahd University of Petroleum & Minerals.Suche in Google Scholar
ISO (2010). ISO standard: Hard coal and coke: Determination of volatile matter. ISO 562:2010. Geneva, Switzerland.Suche in Google Scholar
Joshi, J. B., Pandit, A. B., Kataria, K. L., Kulkarni, R. P., Sawarkar, A. N., Tandon, D., Ram, Y., & Kumar, M. M. (2008). Petroleum residue upgradation via visbreaking: A review. Industrial & Engineering Chemistry Research, 47, 8960-8988. DOI: 10.1021/ie0710871.10.1021/ie0710871Suche in Google Scholar
Liu, Y. D., Gao, L. A., Wen, L. Y., & Zong, B. N. (2009). Recent advances in heavy oil hydroprocessing technologies. Recent Patents on Chemical Engineering, 2, 22-36. DOI: 10.2174/2211334710902010022.10.2174/2211334710902010022Suche in Google Scholar
Lee, S. H., Heo, H. S., Jeong, K. E., Yim, J. H., Jeon, J. K., Jung, K. Y., Ko, Y. S., Kim, S. S., & Park, Y. K. (2011). Catalytic pyrolysis of oilsand bitumen over nanoporous catalysts. Journal of Nanoscience and Nanotechnology, 11, 759-762. DOI: 10.1166/jnn.2011.3232.10.1166/jnn.2011.3232Suche in Google Scholar PubMed
Mar Juárez, E., Ortega García, F. J., & Schacht Hernández, P. (2014). Hydrocracking of vacuum residue by homogeneous catalysis. Fuel, 135, 51-54. DOI: 10.1016/j.fuel.2014.05.070.10.1016/j.fuel.2014.05.070Suche in Google Scholar
Menoufy, M. F., Ahmed, H. S., Betiha, M. A., & Sayed, M. A., (2014). A comparative study on hydrocracking and hydrovisbreaking combination for heavy vacuum residue conversion. Fuel, 119, 106-110. DOI: 10.1016/j.fuel.2013.11.017.10.1016/j.fuel.2013.11.017Suche in Google Scholar
Oelert, H. H., Bloss, R., & Zhang, P. F. (1988). Parameter evaluation for coprocessing of brown coal and vacuum residue from petroleum. In Symposium on Coal-Derived Fuels - Coprocessing, June 5-10, 1988 (pp. 185-192). Toronto, Canada: ACS.Suche in Google Scholar
Rana, M. S., Sámano, V., Ancheyta, J., & Diaz, J. A. I. (2007). A review of recent advances on process technologies for upgrading of heavy oils and residua. Fuel, 86, 1216-1231. DOI: 10.1016/j.fuel.2006.08.004.10.1016/j.fuel.2006.08.004Suche in Google Scholar
Shah, A. A. (2011). Experimental optimization of the CAPRI process. Ph.D. Thesis, The University of Birmingham, Birmingham, UK.Suche in Google Scholar
Speight, J. G. (2012). Visbreaking: A technology of the past and the future. Scientia Iranica, 19, 569-573. DOI: 10.1016/j.scient.2011.12.014.10.1016/j.scient.2011.12.014Suche in Google Scholar
Stratiev, D., Shishkova, I., Dinkov, R., Nikolova, R., Mitkova, M., Stanulov, K., Sharpe, R., Russell, C. A., Obryvalina, A., & Telyashev, R. (2014). Reactivity and stability of vacuum residual oils in their thermal conversion. Fuel, 123, 133-142. DOI: 10.1016/j.fuel.2014.01.043.10.1016/j.fuel.2014.01.043Suche in Google Scholar
Thomas, M., Fixari, B., Le Perchec, P., Princic, Y., & Lena, L. (1989). Visbreaking of Safaniya vacuum residue in the presence of additives. Fuel, 68, 318-322. DOI: 10.1016/0016-2361(89)90095-1.10.1016/0016-2361(89)90095-1Suche in Google Scholar
Viet, T. T., Lee, J. H., Ma, F. Z., Kim, G. R., Ahn, I. S., & Lee, C. H. (2013). Hydrocracking of petroleum vacuum residue with activated carbon and metal additives in a supercritical m-xylene solvent. Fuel, 103, 553-561. DOI: 10.1016/j.fuel.2012.06.075.10.1016/j.fuel.2012.06.075Suche in Google Scholar
Wieckowska, J., & Kwiatkowska, E. (1992). A study of the mixture of coal and residue of the vacuum distillation of crude oil by thermal analysis. Journal of Thermal Analysis and Calorimetry, 38, 463-474. DOI: 10.1007/bf01915511.10.1007/BF01915511Suche in Google Scholar
Wieckowska, J. (1993). Effect of petroleum residue addition on the carbonization of non-coking coals. Fuel, 72, 1481-1483. DOI: 10.1016/0016-2361(93)90004-l. 10.1016/0016-2361(93)90004-LSuche in Google Scholar
© Institute of Chemistry, Slovak Academy of Sciences
Artikel in diesem Heft
- Deferoxamine–paper for iron(III) and vanadium(V) sensing
- Integrated investigations for the characterisation of Roman lead-glazed pottery from Pompeii and Herculaneum (Italy)
- Determination of acetylcholinesterase and butyrylcholinesterase activity without dilution of biological samples
- Characterization of a novel Aspergillus niger beta-glucosidase tolerant to saccharification of lignocellulosic biomass products and fermentation inhibitors
- Immobilisation of tyrosinase on siliceous cellular foams affording highly effective and stable biocatalysts
- Displacement washing of soda rapeseed pulp
- Hydrovisbreaking of vacuum residue from Russian Export Blend: influence of brown coal, light cycle oil, or naphtha addition
- Antimicrobial properties and chemical composition of liquid and gaseous phases of essential oils
- Syntheses, structures and properties of isonicotinamidium, thionicotinamidium, 2- and 3-(hydroxymethyl)pyridinium nitrates
- Density of lithium fluoride–lithium carbonate-based molten salts
- Synthesis and antimicrobial activity of sulphamethoxazole-based ureas and imidazolidine-2,4,5-triones
- Synthesis, biological evaluation, quantitative-SAR and docking studies of novel chalcone derivatives as antibacterial and antioxidant agents
- Application of polypyrrole nanowires for the development of a tyrosinase biosensor
- Synthesis of a sialic acid derivative of ristocetin aglycone as an inhibitor of influenza virus
- Erratum to “Ľubomír Vančo, Magdaléna Kadlečíková, Juraj Breza, Pavol Michniak, Michal Čeppan, Milena Reháková, Eva Belányiová, Beata Butvinová: Differentiation of selected blue writing inks by surface-enhanced Raman spectroscopy”, Chemical Papers 69 (4) 518–526 (2015)
Artikel in diesem Heft
- Deferoxamine–paper for iron(III) and vanadium(V) sensing
- Integrated investigations for the characterisation of Roman lead-glazed pottery from Pompeii and Herculaneum (Italy)
- Determination of acetylcholinesterase and butyrylcholinesterase activity without dilution of biological samples
- Characterization of a novel Aspergillus niger beta-glucosidase tolerant to saccharification of lignocellulosic biomass products and fermentation inhibitors
- Immobilisation of tyrosinase on siliceous cellular foams affording highly effective and stable biocatalysts
- Displacement washing of soda rapeseed pulp
- Hydrovisbreaking of vacuum residue from Russian Export Blend: influence of brown coal, light cycle oil, or naphtha addition
- Antimicrobial properties and chemical composition of liquid and gaseous phases of essential oils
- Syntheses, structures and properties of isonicotinamidium, thionicotinamidium, 2- and 3-(hydroxymethyl)pyridinium nitrates
- Density of lithium fluoride–lithium carbonate-based molten salts
- Synthesis and antimicrobial activity of sulphamethoxazole-based ureas and imidazolidine-2,4,5-triones
- Synthesis, biological evaluation, quantitative-SAR and docking studies of novel chalcone derivatives as antibacterial and antioxidant agents
- Application of polypyrrole nanowires for the development of a tyrosinase biosensor
- Synthesis of a sialic acid derivative of ristocetin aglycone as an inhibitor of influenza virus
- Erratum to “Ľubomír Vančo, Magdaléna Kadlečíková, Juraj Breza, Pavol Michniak, Michal Čeppan, Milena Reháková, Eva Belányiová, Beata Butvinová: Differentiation of selected blue writing inks by surface-enhanced Raman spectroscopy”, Chemical Papers 69 (4) 518–526 (2015)
