Volume 38, Issue 4

Multiphase flows with momentum, heat, and mass transfer exist widely in a variety of industrial applications. With the rapid development of numerical algorithms and computer capacity, advanced numerical simulation has become a promising tool in investigating multiphase transport problems. Immersed boundary (IB) method has recently emerged as such a popular interface capturing method for efficient simulations of multiphase flows, and significant achievements have been obtained. In this review, we attempt to give an overview of recent progresses on IB method for multiphase transport phenomena. Firstly, the governing equations, the basic ideas, and different boundary conditions for the IB methods are introduced. This is followed by numerical strategies, from which the IB methods are classified into two types, namely the artificial boundary method and the authentic boundary method. Discussions on the implementation of various boundary conditions at the interphase surface with momentum, heat, and mass transfer for different IB methods are then presented, together with a summary. Then, the state-of-the-art applications of IB methods to multiphase flows, including the isothermal flows, the heat transfer flows, and the mass transfer problems are outlined, with particular emphasis on the latter two topics. Finally, the conclusions and future challenges are identified.

The concept of Metzner and Otto was initially developed for correlating power measurements in stirred vessels for shear-thinning fluids in the laminar regime with regard to those obtained for Newtonian liquids. To get this overlap, Metzner and Otto postulated and determined an “effective shear rate” which was proportional to the rotational speed of the impeller Although it was not based on a strong theoretical background, it was rapidly admitted as a practical engineering approach and was extended for seeking out a “Newtonian correspondence” with non-Newtonian results (i.e. different classes of fluids). This was applied in a variety of tank processes even for predicting heat transfer or mixing time, which stretches far away from the frame initially envisaged by Metzner and Otto themselves. This paper aimed to show how dimensional analysis offers a theoretically founded framework to address this issue without the experimental determination of effective quantities. This work also aimed to enlarge the underlying questions to any process in which a variable material property exists and impacts the process. For that purpose, the pending questions of Metzner and Otto concept were first reminded (i.e. dependence of the Metzner–Otto constant to rheological parameters, physical meaning of the effective shear rate, etc.). Then, the theoretical background underlying the dimensional analysis was described and applied to the case of variable material properties (including non-Newtonian fluids), by introducing in particular the concept of material similarity. Finally, two examples were proposed to demonstrate how the rigorous framework associated with the dimensional analysis is a powerful method to exceed the concept of Metzner and Otto and can be adapted beyond the Ostwald–de Waele power law model to a wide range of non-Newtonian fluids in various processes, without being restricted to batch reactor and laminar regime.

Membranes are considered promising tools for gas sweetening due to their lower footprint (i.e., area and energy requirement, considering elimination of solvent/absorbent and its associated regeneration procedures), and ease of scale-up. Performing membrane gas separation is strongly dependent on membrane materials. With a 0.38-nm pore size, the SAPO-34 membrane surpasses the upper bond limit for CO 2 /CH 4 separation. However, preparing defect-free and high-performance zeolite membranes is quite challenging. This paper reviews gas transport and separation mechanisms in SAPO-34 membranes, and it discusses prospective approaches for obtaining membranes with defect-free selective layers and hence high separation performance. Highlights, as well as the authors’ perspectives on the future development of SAPO-34 membranes in the field of gas separation, are pointed out.

Anaerobic ammonium oxidation (anammox) has recently become of significant interest due to its capability for cost-effective nitrogen elimination from wastewater. However, anaerobic ammonia-oxidizing bacteria (AnAOB) are sensitive to environmental changes and toxic substances. In particular, the presence of antibiotics in wastewater, which is considered unfavorable to the anammox process, has become a growing concern. Therefore, it is necessary to evaluate the effects of these inhibitors to acquire information on the applicability of the anammox process. Hence, this review summarizes our knowledge of the effects of commonly detected antibiotics in water matrices, including fluoroquinolone, macrolide, β-lactam, chloramphenicol, tetracycline, sulfonamide, glycopeptide, and aminoglycoside, on the anammox process. According to the literature, the presence of antibiotics in wastewater could partially or completely inhibit anammox reactions, in which antibiotics targeting protein synthesis or DNA replication (excluding aminoglycoside) were the most effective against the AnAOB strains.