Impact Factor: 1.9

Journal

International Polymer Processing

The Journal of the Polymer Processing Society

Editor-in-Chief: José A. Covas

Language: English

First published: January 1, 1986

Publication Frequency: 5 issues per year

View latest issue

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

About this journal

International Polymer Processing offers original research contributions, invited review papers and recent technological developments in processing thermoplastics, thermosets, elastomers and fibers as well as polymer reaction engineering. For more than 25 years International Polymer Processing, the journal of the Polymer Processing Society, provides strictly peer-reviewed, high-quality articles and rapid communications from the leading experts around the world.
All articles are subject to thorough, independent peer review.
Editor: Polymer Processing Society

Audience: Researchers and industrial practitioners in all fields related to the science and the industry of polymer processing.

Your Benefits

Secure archiving by De Gruyter and the independent archiving service Portico

Requires Authentication Unlicensed
Licensed

Assessing solids conveying in injection moulding machines using coupled numerical simulations based on the discrete element method (DEM) and multibody systems (MBS)

September 1, 2025

Jan Landgraeber, Volker Schoeppner, Florian Bruening

Download PDF

Design of single screw machines for polymer processing often focuses on the melt dominated areas of the screw. However, solids conveying is a key aspect for processes with high screw speeds, grooved feed sections, small screw diameters and material with low bulk density. In injection moulding, throughput limitations are highly relevant in packaging applications as due to low cooling times, plasticizing affects the cycle time. In addition, insufficient solids conveying is a primary cause for air residues in the melt and final product. Therefore, well-designed feed sections are required, especially as direct processing of regrind in recycling applications becomes more relevant due to governmental restrictions. Existing models for injection moulding are based on analytical equations and do not allow to assess new feed sections and feed opening designs, adapted to high screw speeds or regrind. In this paper, numerical simulations based on the Discrete Element Method (DEM), previously used in the field of extrusion, are carried out. In order to replicate the cyclic, superimposed rotation and translation of the screw, a coupled approach of DEM and Multibody Systems Simulation (MBS) is pursued. To verify the accuracy of such coupled simulations, a special test setup is added to a conventional injection moulding machine. Pure solids conveying is investigated, as DEM does not accommodate for large plastic deformations or melting. Different screw and intake designs as well as smooth and grooved barrels are investigated. Selected resins, pellet shapes and regrind are processed, varying the processing parameters and comparing the results to the simulation. The coupled approach replicates reality well in terms of throughput, confirming that DEM can be utilised to further investigate process phenomena and develop calculation models for solids conveying in injection moulding.
Requires Authentication Unlicensed
Licensed

A review on the effect of fiber treatment and fillers on mechanical properties of kenaf fiber–reinforced composites

August 26, 2025

Makeshkumar Mani, Sasi Kumar Mani, Felix Sahayaraj Arockiasamy, Gokulkumar Sivanantham, Jenish Iyyadurai

Download PDF

Nowadays, fiber-reinforced composites have gained attention due to their potential to replace conventional materials in numerous applications. Researchers have shown considerable interest in using natural fiber–based composites for structural applications in the building, aerospace, defense, military, and automotive sectors. These materials possess unique characteristics that enhance their appeal. Kenaf fiber has become a preferred reinforcement material for composites due to its rapid growth in various climatic conditions and economic viability. It is increasingly recognized as an eco-friendly alternative to glass fiber composites. To enhance the performance of composites, researchers have found that the use of filler materials and chemical treatments significantly improve the mechanical characteristics and reduce the organic content in composite laminates. This study provides an overview of various chemical treatments that have been studied for kenaf fiber, the mechanical properties, and the applications of kenaf fiber in various fields. It explores the impact of chemical treatments on the surface of kenaf fiber and the mechanical properties of the composites created with various amounts of natural and synthetic fillers.
Requires Authentication Unlicensed
Licensed

Strength and thermophysical properties of polylactide-few-layer graphene composites

August 26, 2025

Nikita D. Podlozhnyuk, Alexei A. Vozniakovskii, Alexander P. Voznyakovskii, Sergey V. Kidalov

Download PDF

Modification of polymer matrices with carbon nanomaterials is a common practice for producing strong and wear-resistant composites. However, carbon nanomaterials are still not widely used in industry due to low-throughput synthesis methods. In this work, the strength and thermophysical properties of a composite based on polylactide modified with few-layer graphene were studied. The introduction of few-layer graphene leads to increase the flexural strength, thermal conductivity and wear resistance of polylactide. Few-layer graphene was obtained by self-propagating high-temperature synthesis. This method is easily scalable and allows to obtain few-layer graphene from carbohydrates. The work discusses the properties of synthesized few-layer graphene and the mechanisms of its interaction with polylactide.
Requires Authentication Unlicensed
Licensed

Investigation on the extrusion-induced geometric distortion of three-lumen medical micro-catheters through numerical simulation

July 22, 2025

Xiaobo Song, Zongjing Mu, Mingyang Su, Junfeng Liu, Zhongbin Xu, Cailiang Zhang

Download PDF

Medical catheters are widely used in various treatment methods such as drainage, perfusion, blood collection, and play an indispensable role in medical therapy. Multi-lumen medical micro-catheters make many treatments more efficient and convenient. However, the extrusion-induced geometric distortion of the multi-lumen catheters is still unclear, making shape control remain heavily reliant on experience, which limits their manufacture and applications. This paper focuses on three-lumen medical micro-catheters (TLMMC), utilizing the computational fluid dynamics (CFD) method to conduct three-dimensional isothermal numerical simulations of the extrusion process. This study explores the extrusion-induced geometric distortion of microcapillaries within catheters. Results show that in the extrusion direction, a critical threshold occurs approximately 4 mm from the die outlet, where the melt transitions from being primarily influenced by die swell to being influenced by the stretching effect. The findings provide valuable insights for the manufacturing of TLMMC and holds broad application prospects in interventional diagnosis and treatment.
Requires Authentication Unlicensed
Licensed

Calibrator modelling in the simulation of extrusion process

July 18, 2025

Benoit Debbaut

Download PDF

Technical polymer profiles are often extruded while dragging them into a water bath. However, complex profiles may require additional forming tools. For example, geometrically complex profiles, such as PVC-window frames, require the use of a series of calibrators for satisfying severe geometric requirements. Calibrators are also required for rapid and homogeneous cooling as well, they must however be designed in such a way to minimize the temperature gradient along the profile thickness and hence to minimize the residual stresses of thermal origin. Within the context of numerical simulation of extrusion flows, a calibrator brings an additional downstream constraint to the kinematic equation which governs the extrudate surface shape. In the present paper, we propose a simple engineering approach for modelling calibrators used in profile extrusion, and we apply it to the non-isothermal simulation of the extrusion process for a 3D non-symmetric profile.
Open Access
Impact of domain knowledge on developing pumping models for single-screw extruders using symbolic regression

June 26, 2025

Daniel Herzog, Florian Lehner, Wolfgang Roland, Christian Marschik, Gerald Berger-Weber

Download PDF

Reliable process models are a valuable asset in polymer extrusion to reduce downtimes and rejects, to improve process efficiency, and to accelerate the development of new screw designs. With ongoing progress in computational capabilities, increasing attention is paid to modeling techniques that infer predictions directly from the process data. Out of these, symbolic regression is an attractive option for process engineers, since it provides information as ready-to-use analytical mathematical expressions. However, extensive workload for data curation and model generation impedes obtaining regression models of high precision and general validity. In polymer extrusion, integrating domain knowledge into the regression data is already known to support the search for accurate prediction models. To assess this benefit systematically and quantitatively, we developed symbolic regression models for the pumping characteristics of single-screw extruders from three-dimensional fluid dynamics simulations, including different modules of domain knowledge at data preprocessing: Initially, models are created (i) using theory of similarity only, followed by models that further (ii) accept derived physical parameters as additional input features, (iii) combine additional input features with logarithmic scaling, and (iv) correct a theoretical approximation equation. For each case of data preprocessing, the regression models are evaluated in terms of their interpolation and extrapolation capabilities, their structural complexities, and their required training times. This study demonstrates that symbolic regression is most efficient on the original dimensionless data if nonlinear trends in dimensionless space remain below second order or within one decade. Once stronger nonlinearities occur, however, capturing these nonlinearities with prior theoretical approximations substantially enhances extrapolation capability and computational efficiency, albeit at the price of larger models.
Requires Authentication Unlicensed
Licensed

Preparation and properties of biodegradable antibacterial polylactic acid/modified chitin antibacterial agent composites

June 25, 2025

Yuhan Zhang, Kang Zhang, Rui Zhang, Lisha Pan, Nai Xu, Yuhong Feng

Download PDF

As a biodegradable material, polylactic acid (PLA) is widely used in healthcare industries, however, its bacterial properties cannot meet the requirements. Chitin, a natural antibacterial agent, is difficult to directly melt blend with PLA due to agglomeration. In order to enhance the compatibility between chitin and PLA, in this study, firstly, chitin was decomposed by cellulase to prepare enzymolysis chitin (EC). The viscosity and particle size of EC were measured and the optimal enzymolysis conditions were chosen. Then, the modified chitin antibacterial agent (MCAA) was prepared by mixing EC with glyceryl triacetate (GTA) and polyethyleneglycol (PEG), and the biodegradable PLA/MCAA composite was prepared by melt blending. Finally, the tensile, thermal, antibacterial properties, and the micromorphology of the PLA/MCAA composite were investigated. The results show that at a pH of 6.4 and a temperature of 55 °C, EC exhibited low viscosity and particle size after an enzymatic hydrolysis time of 4.5 h. Compared with PLA, PLA/MCAA composite exhibited better antibacterial effects against Escherichia coli and Staphylococcus aureus . Furthermore, in comparison to the PLA/chitin composite, there was less agglomeration in the PLA/MCAA composite, and the particle distribution of MCAA was more uniform.
Requires Authentication Unlicensed
Licensed

A review on industrial optimization approach in polymer matrix composites manufacturing

June 12, 2025

Adryan Ang Seng Theng, Elammaran Jayamani, Jeyanthi Subramanian, Vinoth Kumar Selvaraj, Shreya Viswanath, Ravi Sankar, Subramani Raja, Maher Ali Rusho

Download PDF

Optimization is generally referred to as making the best and most effective use of materials. Optimization plays the most significant role when it comes to the field of research and development. Developing new products needs the best results with optimal time, cost, and resources. Especially in the case of industrial experiments, optimizing materials can save time, money, and manual power. So, it is necessary to have a comprehensive knowledge of various optimizing techniques currently adopted in industry. Hence this review covers the multiple types of polymer matrix composites manufacturing techniques currently adopted in industry, focusing on the manufacturing problems from the optimization perspective. Also, this review addresses some of the optimization approaches that current researchers attempt at every step of their research journey. Generally, optimization has to be coupled with the advancement of the manufacturing process that provides an ideal solution for cost reduction, energy consumption minimization, and improved competitiveness while assuring the end products’ quality. Stochastic algorithms such as Genetic Algorithms and Particle Swarm Optimization are examples of advanced statistical optimization techniques adopted by researchers in solving process parameters. Furthermore, experimental approaches such as the Taguchi Method and Response Surface Methodology for polymer matrix composite manufacturing optimization are also discussed in this review. Last but not least, a brief overview of how 3D printing can benefit the fabrication of polymer matrix composites is mentioned.
Requires Authentication Unlicensed
Licensed

Optimal performance of poly-hybrid nanocomposites promoted with carbon fibers and nano silicon carbide particles via compression associated with hot pressing: characterization study

June 12, 2025

Venkatesh Rathinavelu, Sakthivel Perumal, Mohana Krishnan Amarnath, Subramaniam Prabagaran, Sekar Subramani, Manzoore Elahi Mohammad Soudagar, Vinayagam Mohanavel, Sami Al Obaid, Saleh Hussein Salmen

Download PDF

Polycarbonate (PC) – fiber composites are high heat resistant, and thermal interface materials for electronics applications because of their good thermal stability, impact resistance, strength, low scratch resistance, and low fracture toughness. This research intends to enhance the functional behaviour of PC poly-fiber composites promoted with unidirectional carbon fibers (CF) and 1–5 wt% of 50 nm silicon carbide (SiC) particles with epoxy-based coupling agent, prepared via compression moulding associated with hot pressing. The synthesized PC composite samples PC1, PC2, PC3, and PC4, containing 0, 1, 3, and 5 wt% of nano SiC, were subjected to mechanical testing and the results are compared to find the optimum behaviour. The PC4 composite sample of PC/5 wt% SiC/CF/PC laminate showed optimal performance, and transmission electron microscope (TEM) analysis confirmed the presence of SiC and CF as effective interfaces to the PC matrix. The PC/5 wt% SiC/CF/PC hybrid nanocomposite provides optimum fracture toughness (5.5 MPa 0.5 ), improved hardness (94HV), superior flexural strength (188 MPa) and enhanced yield (96 MPa) & tensile strength (105 MPa), which are greater than those of pure PC laminates. The PC4 composite is proposed for automotive seat frame applications.
Requires Authentication Unlicensed
Licensed

Spectroscopic analysis of silicone intraocular lenses by optical transmission measurements and FTIR

May 23, 2025

Alfio Torrisi, Anna Maria Roszkowska, Mariapompea Cutroneo, Lorenzo Torrisi

Download PDF

Since the mid-20th century, intraocular lenses (IOLs) have been widely used in cataract surgery to restore vision in patients with refractive issues, replacing the natural lens of the eye. In this study, we spectroscopically characterized silicone IOLs using Fourier Transform Infrared (FTIR) spectroscopy, optical transmission measurements, and wettability investigations after exposing the lenses to UV irradiation for several hours. The results provide valuable insights into the material composition, UV protection, and overall optical quality of IOLs, which are crucial for optimizing and improving the selection of these devices for clinical use. Moreover, the experimental results explain why this material has become less commonly employed for intraocular lenses. Prolonged exposure to UV radiation induces modifications in the surface layers, increasing wettability and compromising optical properties, including a significant reduction in visible light transmittance.
Requires Authentication Unlicensed
Licensed

Medical grade polypropylene after artificial aging in regard to the VOC emissions

April 28, 2025

Annette Rüppel, Fabian Gansiniec, Hassan Ali Rida, Hans-Peter Heim

Download PDF

In this study, the influence of artificial aging on the mechanical and thermal properties and VOC emissions of medical grade polypropylene (PP) is investigated. For the investigations, tensile test specimens were produced on an injection molding machine. To test the long-term stability of the materials, the ASTM 1980 guideline was adopted at the temperatures of 65 °C, 90 °C and 120 °C. The thermal, mechanical and emission properties were tested using differential scanning calorimetry (DSC), tensile tests and GC-MS analysis before and after artificial aging. The results of the tensile tests show a decrease in elongation at break with increasing temperature and storage time. Similarly, the results of the DSC measurements show an increase in melting enthalpy, which indicates post-crystallization in the material. The GC-MS results show that the emissions due to artificial aging decrease with increasing temperature and storage time, so that the emissions of the samples stored at 120 °C are almost zero.
Requires Authentication Unlicensed
Licensed

Synthesis of poly(methyl methacrylate) microspheres using poly(2-acrylamido-2-methylpropane sulfonic acid) as a suspending agent

February 12, 2025

Konstantin K. Shirshin, Nadezhda Yu. Ladilova, Pavel V. Kornienko, Viktoria I. Igoshina, Vladimir P. Chuev

Download PDF

Poly(methyl methacrylate) microspheres are used in various fields of application including clinical dentistry and surgery. Creating new technological schemes and modernizing already known technologies of poly(methyl methacrylate) microspheres production have developed rapidly during the last 50 years. In this work, the influence of suspending agents (type, concentration etc.) on the average size of microspheres is shown. Poly(2-acrylamido-2-methylpropane sulfonic acid) and its sodium salt are proposed as very effective suspending agents, allowing to produce microspheres of required size under various conditions. The effect of initiator concentration and stirring speed on average size of particles is also investigated. A technological scheme is proposed in accordance to experimental data.

Issue 0

Issue 3

Special Issue: PPS2024 Conference - Selected Contributions; Guest Editor: Ana Isabel Ares-Pernas

to be implemented...

Issue 0

Issue 40

Issue 39

Issue 38

Issue 37

Issue 36

Issue 35

Issue 34

Issue 33

Issue 32

Issue 31

Issue 30

Issue 29

Issue 28

Issue 27

Issue 26

Issue 25

Issue 24

Issue 23

Issue 22

Issue 21

Issue 20

Issue 19

Issue 18

Issue 17

Issue 16

Issue 15

Issue 14

Issue 13

Issue 12

Issue 11

Issue 10

Issue 9

Issue 8

Issue 7

Issue 6

Issue 5

Issue 4

Issue 3

Issue 2

Issue 1

International Polymer Processing publishes special and thematic issues focussed on important and emerging topics in the field of study. The journal has established a rigorous process to ensure that any special issue manuscripts follow the same high-quality standards and peer review processes as regular manuscripts. For further information on the journal’s peer review policy please see the "Instructions for Authors".

Recent Special Issues

Volume 40 | Issue 3 Special Issue: PPS2024 Conference - Selected Contributions; Guest Editor: Ana Isabel Ares-Pernas

Journal Impact Factor	1.9	2024, Journal Citation Reports (Clarivate, 2025)
5-year Journal Impact Factor	1.5	2024, Journal Citation Reports (Clarivate, 2025)
Journal Citation Indicator	0.30	2024, Journal Citation Reports (Clarivate, 2025)
CiteScore	2.8	2024, Scopus (Elsevier B.V., 2025)
SCImago Journal Rank	0.279	2024, SJR (Scimago Lab, 2025; Data Source: Scopus)
Source Normalized Impact per Paper	0.577	2024, CWTS Journal Indicators (CWTS B.V., 2025; Data Source: Scopus)

More information about journal rankings

Submit your manuscript via

https://www.editorialmanager.com/ipp/default.aspx

Please note

Before submitting your article please have a look at our Ethical Guidelines and our Copyright Transfer Agreement

Open Access

In this journal, authors have the option to publish their articles under an open access license. Open Access allows you as an author to retain copyright and share your findings with colleagues and interested parties worldwide without any restraints. If you choose to publish in hybrid gold open access, more information on costs can be found under the " Hybrid Journals" tab here.

Please note that authors from institutions with which we have a transformative agreement can publish open access without paying an article processing charge (APC). More information on the eligible institutions and articles can be found under the "Funding and Support" tab here.

Editor in Chief
Prof. José A. Covas (jcovas@dep.uminho.pt)
University of Minho, Portugal

Associate Editors
Prof. Marianna Kontopoulou (kontopm@queensu.ca)
Queen's University, Canada

Prof. Suryasarathi Bose (sbose@iisc.ac.in)
Indian Institute of Science Bangalore, India

Editorial Board
Jean-François Agassant, MINES ParisTech, Valbonne, France
Volker Altstädt, University of Bayreuth, Bayreuth, Germany
Satinah Bhattacharya, RMIT University, Melbourne, Australia
Mosto Bousmina, Euro-Mediterranean University of Fes, Fes, Morocco
Mukerrem Cakmak, Purdue University, West Lafayette, IN, U.S.A.
Philippe Cassagnau, Université Claude Bernard Lyon 1, Lyon, France
Nicole Demarquette, Ecole de Technologie Supérieure, Montréal, Canada
Mitsuyoshi Fujiyama, Fujiyama Polymer Research, Yamaguchi-ken, Japan
Clemens Holzer, Montanuniversität Leoben, Leoben, Austria
Christian Hopmann, RWTH Aachen University, Aachen, Germany
Toshitaka Kanai, Idemitsu Kosan Co., Ltd, Chiba, Japan
Takeshi Kikutani, Tokyo Institute of Technology, Tokyo, Japan
Jin Kon Kim, Pohang University of Science and Technology, Kyungbuk, Korea
Shih-Jung Liu, Chang Gung University, Taoyuan City, Taiwan
Ernesto di Maio, University of Naples "Federico II”, Naples, Italy
Paula Moldenaers, KU Leuven, Leuven, Belgium
Masahiro Ohshima, Kyoto University, Kyoto, Japan
Chul B. Park, University of Toronto, Toronto, Canada
Luis António Pessan, Federal University of S. Carlos, São Carlos, Brazil
Suprakas Sinha Ray, Council for Scientific and Industrial Research, Gauteng, South Africa
Luyi Sun, University of Connecticut Storrs, CT, U.S.A.
Lih-Sheng Turng, University of Wisconsin-Madison, Madison, WI, U.S.A.
John Vlachopoulos, McMaster University, Hamilton, Canada

Society contact
Prof. Sadhan C. Jana (janas@uakron.edu)
University of Akron, USA
President, Polymer Processing Society (PPS)

Journal Coordinator
Katarzyna Kowalska (katarzyna.kowalska@degruyter.com)

International Polymer Processing is covered by the following services:

Baidu Scholar
Chemical Abstracts Service (CAS) - CAplus
Chemical Abstracts Service (CAS) - SciFinder
CNKI Scholar (China National Knowledge Infrastructure)
CNPIEC - cnpLINKer
Dimensions
EBSCO Discovery Service
Google Scholar
J-Gate
Journal Citation Reports/Science Edition
Naver Academic
Naviga (Softweco)
Primo Central (ExLibris)
ReadCube
ScienceON (Korea Institute of Science and Technology Information)
Scilit
SCImago (SJR)
SCOPUS
Semantic Scholar
Sherpa/RoMEO
Summon (ProQuest)
TDNet
WanFang Data
Web of Science - Current Contents/Engineering, Computing, and Technology
Web of Science - Science Citation Index Expanded
WorldCat (OCLC)
X-MOL
Yewno Discover

Journal information

Additional information

eISSN:

2195-8602

ISSN:

0930-777X

Language:

English

Publisher:

De Gruyter

Additional information

First published:

January 1, 1986

Publication Frequency:

5 issues per year

eISSN: 2195-8602

ISSN: 0930-777X

Safety & product resources

Manufacturer information:
Walter de Gruyter GmbH
Genthiner Straße 13
10785 Berlin
productsafety@degruyterbrill.com

International Polymer Processing

About this journal

Your Benefits

Supplementary Materials

Topics

International Polymer Processing

Overview

About this journal

Your Benefits

Ahead of Publication / Just Accepted

Issues

Special issues

Ranking

Submit

Editorial

Abstracting and Indexing

Supplementary Materials

Supplementary Materials

Topics

Topics

External Links

Bibliographic data