Home Technology Amorphous films at metal/ceramic interfaces
Article
Licensed
Unlicensed Requires Authentication

Amorphous films at metal/ceramic interfaces

  • Amir Avishai , Christina Scheu and Wayne D. Kaplan EMAIL logo
Published/Copyright: January 11, 2022
Become an author with De Gruyter Brill

Abstract

The interface chemistry and structure of two metal/ceramic composites was investigated using analytical and high-resolution transmission electron microscopy. Cu and Ni alumina composites were prepared and doped with predetermined amounts of Ca and Si additions to obtain a glass phase during sintering. The Si and Ca additions resulted in the formation of glass pockets at triple junctions and intergranular films at the alumina grain boundaries and the metal/alumina interfaces. A variation in the thickness and chemistry of the film at the metal/alumina interface was observed between the two composites. The formation of intergranular films and their presence at metal/alumina interfaces of occluded particles indicate that the intergranular films are probably stable.


Prof. W. D. Kaplan Department of Materials Engineering Technion – Israel Institute of Technology Haifa 32000, Israel Tel./Fax: +9724 829 4580
Dedicated to Professor Dr. Dr. h. c. Manfred Rühle on the occasion of his 65th birthday

Funding statement: The authors wish to thank to U. Bäder and M. Sycha for their excellent TEM specimen preparation. Stimulating discussions with G. Dehm are gratefully acknowledged. This research was supported by the Israel Science Foundation. A. Avishai was partially supported by an Applied Materials Fellowship. He would like to acknowledge the Minerva Seed Fellowship for support of a two month stay at the Max-Planck-Institut für Metallforschung in Stuttgart, Germany.

References

[1] R. Brydson, S.C. Chen, F.L. Riley, S.J. Milne, X. Pan, M. Rühle: J. Am. Ceram. Soc. 81 (1998) 369.10.1111/j.1151-2916.1998.tb02343.xSearch in Google Scholar

[2] K.M. Knowles, S. Turan: Ultramicroscopy 83 (2000) 245.10.1016/S0304-3991(00)00018-8Search in Google Scholar

[3] H.-J. Kleebe, M.K. Cinibulk, R.M. Cannon, M. Rühle: J. Am. Ceram. Soc. 76 (1993) 1969.10.1111/j.1151-2916.1993.tb08319.xSearch in Google Scholar

[4] L.P. Ferroni, G. Pezzotti, T Isshiki, H.-J. Kleebe: Acta Mater. 49 (2001) 2109.10.1016/S1359-6454(01)00117-3Search in Google Scholar

[5] I. Tanaka, H.-J. Kleebe, M.K. Cinibulk, J. Bruley, D.R. Clarke, M. Rühle: J. Am. Ceram. Soc. 77 (1994) 911.10.1111/j.1151-2916.1994.tb07246.xSearch in Google Scholar

[6] D.R. Clarke: J. Am. Ceram. Soc. 70 (1987) 15.10.1111/j.1151-2916.1987.tb04846.xSearch in Google Scholar

[7] D.R. Clarke, T.M. Shaw, A.P. Philipse, R.G. Horn: J. Am. Ceram. Soc. 76 (1993) 1201.10.1111/j.1151-2916.1993.tb03741.xSearch in Google Scholar

[8] C. Scheu, G. Dehm, W.D. Kaplan: J. Am. Ceram. Soc. 84 (2001) 623.10.1111/j.1151-2916.2001.tb00710.xSearch in Google Scholar

[9] J. Luo, Y.M. Chiang: Acta Mater. 48 (2000) 4501.10.1016/S1359-6454(00)00237-8Search in Google Scholar

[10] M. Lieberthal, W.D. Kaplan: Mater. Sci. Eng. A 302 (2001) 83.10.1016/S0921-5093(00)01358-7Search in Google Scholar

[11] E.M. Levin, C.R. Robbins, H.F. McMurdie (Eds.): Phase Diagrams for Ceramists 1969 Supplement, The American Ceramic Society, INC (1969) 138, Fig. 2493.Search in Google Scholar

[12] S.T. Oh, M. Sando, T. Sekino, K. Niihara: Nanostructured Mater. 10 (1998) 267.10.1016/S0965-9773(98)00064-6Search in Google Scholar

[13] R.Z. Chen, W.H. Tuan: J. Eur. Ceram. Soc. 19 (1999) 463.10.1016/S0955-2219(98)00213-1Search in Google Scholar

[14] C.A. Powell-Dogan, A.H. Heuer: J. Am. Ceram. Soc. 73 (1990) 3670.10.1111/j.1151-2916.1990.tb04274.xSearch in Google Scholar

[15] W.J. Huisman, J.F. Peters, M.J. Zwanenburg, S.A. de Vries, T.E. Derry, D. Aberanathy, J.F. van der Veen: Nature 390 (1997) 379.10.1038/37069Search in Google Scholar

[16] A. Hashibon, J. Adler, M.W. Finnis, W.D. Kaplan: Interface Sci. 9 (2001) 175.10.1023/A:1015190207719Search in Google Scholar

[17] A. Hashibon, J. Adler, M.W. Finnis, W.D. Kaplan: Comput. Mater. Sci. 24 (2002) 443.10.1016/S0927-0256(01)00265-8Search in Google Scholar

[18] D.A. Litton, S.H. Garofalini: J. Am. Ceram. Soc. 83 (2000) 2273.10.1111/j.1151-2916.2000.tb01547.xSearch in Google Scholar

[19] D.A. Litton, S.H. Garofalini: J. Mater. Res. 14 (1999) 1418.10.1557/JMR.1999.0192Search in Google Scholar

[20] S. Blonski, S.H. Garofalini: J. Am. Ceram. Soc. 80 (1997) 1997.10.1111/j.1151-2916.1997.tb03083.xSearch in Google Scholar

[21] J.A.S. Ikeda, Y.M. Chiang, A.J. Garrat-Reed, J.B.V. Sande: J. Am. Ceram. Soc. 76 (1993) 2447.10.1111/j.1151-2916.1993.tb03965.xSearch in Google Scholar

[22] U. Alber, H. Müllejans, M. Rühle: Ultramicroscopy 69 (1997) 105.10.1016/S0304-3991(97)00036-3Search in Google Scholar

[23] R. Brydson, P.C. Twigg, F. Loughran, F.L. Riley: J. Mater. Res. 16 (2001) 652.10.1557/JMR.2001.0120Search in Google Scholar

Received: 2002-11-25
Published Online: 2022-01-11

© 2003 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles/Aufsätze
  5. The role of oxidation-induced cavities on the failure of the thermally grown oxide on binary β-NiAl alloys
  6. Phase stability of Y + Gd co-doped zirconia
  7. Mechanisms governing the distortion of alumina-forming alloys upon cyclic oxidation
  8. High-temperature oxidation of FeCrAl alloys: the effect of Mg incorporation into the alumina scale
  9. Nonlinear dielectric properties at oxide grain boundaries
  10. TEM observations of singular grain boundaries and their roughening transition in TiO2-excess BaTiO3
  11. Processing of dense MgO substrates for high-temperature superconductors
  12. Microwave-induced crystallization of polysilazane-derived silicon carbonitride
  13. Schottky barrier formation in liquid-phase-sintered silicon carbide
  14. SrTiO3: a model electroceramic
  15. Optical properties and electronic structure of oxidized and reduced single-crystal strontium titanate
  16. Spreading of liquid Ag and Ag–Mo alloys on molybdenum substrates
  17. Nanoalloying in mixed AgmAun nanowires
  18. Never ending saga of a simple boundary
  19. Comparison of interfacial chemistry at Cu/α-alumina and Cu/γ-alumina interfaces
  20. Microstructure of Cu2O/Si interfaces, made by epitaxial electrodeposition
  21. Metal/oxide interfaces and their reaction with hydrogen
  22. Amorphous films at metal/ceramic interfaces
  23. Some thoughts on source monochromation and the implications for electron energy loss spectroscopy
  24. Determination of the contrast transfer function by analysing diffractograms of thin amorphous foils
  25. Progress in the preparation of cross-sectional TEM specimens by ion-beam thinning
  26. Quantification of interfacial segregation by analytical electron microscopy
  27. Quantification of elemental segregation to lath and grain boundaries in low-alloy steel by STEM X-ray mapping combined with the ζ-factor method
  28. Microstructure of Al/Ti metallization layers
  29. Connectivity of CSL grain boundaries and the role of deviations from exact coincidence
  30. Effect of laser shock processing on the microstructure and mechanical properties of pure Cu
  31. Growth and microstructure of iron nitride layers and pore formation in ε-Fe3N
  32. Phase diagram of the Al–Cu–Fe quasicrystal-forming alloy system
  33. Notifications/Mitteilungen
  34. Personal/Personelles
  35. Gesellschaftsnachricht
  36. International Conferences
Downloaded on 6.12.2025 from https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2003-0051/pdf
Scroll to top button