Startseite Technik Dislocation and surface structures of copper and very-low-carbon steel at low fatigue amplitudes
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Dislocation and surface structures of copper and very-low-carbon steel at low fatigue amplitudes

  • Stefanie E. Stanzl-Tschegg EMAIL logo
Veröffentlicht/Copyright: 3. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill

Abstract

Copper single crystals and polycrystalline very-low-carbon steel (0.036 wt.% C) were fatigue loaded at low and very low amplitudes. The resulting dislocation structures and surface features were studied and the results correlated. Similarities of the face- and body-centred cubic materials as to the resulting dislocation and surface structures are outlined. In addition, the question of an eventual effect of the loading frequency on the resulting microstructural changes is shortly discussed.

Abstract

Kupfereinkristalle und polykristalliner Stahl mit sehr niederem Kohlenstoffgehalt (0.036 Gew.%) wurden bei kleinen und sehr kleinen Amplituden ermüdet. Die resultierenden Versetzungsstrukturen und Oberflächenerscheinungen wurden untersucht und korreliert. Auch wurden die Ähnlichkeiten der beiden kubisch-flächenzentrierten bzw. kubischraumzentrierter Werkstoffe hinsichtlich Versetzungs- und Oberflächenstruktur ermittelt. Zusätzlich wird die Frage eines eventuellen Einflusses der Belastungsfrequenz auf die resultierenden Mikrostrukturänderungen kurz diskutiert.


Dedicated to Professor Dr. Haël Mughrabi on the occasion of his 65th birthday

Prof. Dr. Stefanie Stanzl-Tschegg Institute of Meteorology and Physics University of Agricultural Sciences Türkenschanzstr. 18, A-1180 Vienna, Austria Tel.: +43 1 470 58 20 13 Fax: +43 1 470 58 20 60

The TEM micrographs of the Cu single crystals were taken by Dr. L. Buchinger within a cooperation with Prof. C. Laird. The author wants to thank both of them for this cooperation.


References

1 Mughrabi, H.; Ackermann, F.; Herz, K.: in: J.T. Fong (ed.), ASTM-STP 675, Amer. Soc. for Testing and Materials, Philadelphia, PA (1979) 69.Suche in Google Scholar

2 Laird, C.: in: F.R.N. Nabarro (ed.), Dislocations in Solids, Chapter 26, New-Holland, Amsterdam (1983) 56.Suche in Google Scholar

3 Mughrabi, H.; Bayerlein, B.; Christ, H.-J., in: S.I. Andersen, J.B. Bilde-Sørensen, N. Hansen, T. Leffers, H. Lilholt, O.B. Pedersen, B. Ralph (eds.), Constitutive relations and their physical basis, Risø Nat. Lab., Roskilde (1987) 447.Suche in Google Scholar

4 Laird, C.; Charsley, P; Mughrabi, H: Mater. Sci. Eng. 81 (1986) 433.10.1016/0025-5416(86)90281-8Suche in Google Scholar

5 Christ, H.-J. (ed.): Ermüdungsverhalten metallischer Werkstoffe, Werkstoffinformationsgesellschaft, Frankfurt (1998).Suche in Google Scholar

6 Kettunen, P.O.: Acta Metall. 15 (1967) 1275.10.1016/0001-6160(67)90003-XSuche in Google Scholar

7 Lukás, P.; Klesnil, M.: Mater. Sci. Eng. 11 (1973) 345.10.1016/0025-5416(73)90125-0Suche in Google Scholar

8 Mughrabi, H.: Fatigue Fracture Eng. Mater. Struct. 22 (1999) 633.10.1046/j.1460-2695.1999.00186.xSuche in Google Scholar

9 Lukás, P; Kunz, L., in: S.E. Stanzl-Tschegg, H. Mayer (eds.), Fatigue in the very high cycle regime, Vienna (2001) 23.10.1016/S0142-1123(01)00167-0Suche in Google Scholar

10 Buchinger, L.; Stanzl, S.; Laird, C.: Phil. Mag. A 55 (1984) 275.Suche in Google Scholar

11 Buchinger, L.; Stanzl, S.; Laird, C.: Phil. Mag. A 62 (1990) 633.10.1080/01418619008244797Suche in Google Scholar

12 Mughrabi, H.; Herz, K.; Stark, X.: Acta Metall. 24 (1976) 659.10.1016/0001-6160(76)90086-9Suche in Google Scholar

13 Mughrabi, H.; Herz, K.; Stark, X.: Int. J. Fracture 17 (1981) 193.10.1007/BF00053520Suche in Google Scholar

14 Stanzl, S.; Mitsche, R.; Weiss, B.: Archiv Eisenhüttenwes. 41 (1970) 867.10.1002/srin.197001671Suche in Google Scholar

15 Stanzl, S.; Mitsche, R.: Archiv Eisenhüttenwes. 42 (1971) 413.Suche in Google Scholar

16 Mughrabi, H.: Mater. Sci. Eng. 33 (1978) 207.10.1016/0025-5416(78)90174-XSuche in Google Scholar

17 Wang, R.; Mughrabi, H.: Mater. Sci. Eng. 63 (1984) 147.10.1016/0025-5416(84)90118-6Suche in Google Scholar

18 Neumann, P., in: R.W. Cahn, P. Haasen (eds.), Physical Metallurgy, Elsevier, Amsterdam (1983) 1554.Suche in Google Scholar

19 Yan, B.; Hunsche, A.; Neumann, P.; Laird, C.: Mater. Sci. Eng. 79 (1986) 9.10.1016/0025-5416(86)90381-2Suche in Google Scholar

20 Mayer , H.; Laird C.: Mat. Sci. Eng. A 187 (1994) 23.10.1016/0921-5093(94)90327-1Suche in Google Scholar

21 Mughrabi, H., in: O. Brulin, R.K.T. Hsie (eds.), Proc. Int. Conf. Strength of Metals and Alloys, Vol. 4, New-Holland, Amsterdam (1981) 241.Suche in Google Scholar

22 Kettunen, P.O.: Acta Metall. 15 (1967) 1275.10.1016/0001-6160(67)90003-XSuche in Google Scholar

23 Kettunen, P.O.; Kocks, U.F.: Acta Metall. 20 (1972) 95.10.1016/0001-6160(72)90117-4Suche in Google Scholar

Received: 2002-02-22
Published Online: 2022-01-03

© 2002 Carl Hanser Verlag, München

Heruntergeladen am 2.2.2026 von https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2002-0134/html?lang=de
Button zum nach oben scrollen