Microstructural Features Controlling the Dry Sliding Wear Response of Some Bearing Alloys
-
Braj Kishore Prasad
Abstract
This investigation examines the influence of microstructural features on the dry sliding wear characteristics of some plain bearing alloys. Three different alloys were selected for the study: a leaded-tin bronze, an Al bronze and a Zn-based alloy processed under identical conditions. The wear characteristics of the alloys are explained in terms of the load bearing capability, microcracking tendency, thermal stability and lubricating properties of their microconstituents and the sliding conditions. Wear surfaces, subsurface regions and debris are examined to understand the material removal mechanisms during the process of wear.
Literature
1 Calayag, T. S.: Mining Engn. 35 (1983) 727 – 728.Suche in Google Scholar
2 Kubel Jr., E. J.: Adv. Mater. Process. 132 (1987) 51 – 57.Suche in Google Scholar
3 Rollez, D.; Meeus, M.; Groothaert, L.: Proc. Int. Sympo. Zinc- Aluminium (ZA) Casting Alloys, G. P. Lewis, R. J. Barnhurst and C. A. Loong 17 – 20 Aug., 1986, Toronto, Ontario, Canadian Institute of Metals (1986) 315 – 322.Suche in Google Scholar
4 Metals Handbook, Vol. 18, 1st. ed., ASM, Metals Park, OH (1992) 515 – 522.Suche in Google Scholar
5 E. G. West (ed.): Copper and Its Alloys, Ellis Horwood Publishers, Chicester, John Wiley and Sons NY (1982) 84 – 131.Suche in Google Scholar
6 Woolaston, A. K.: Technical Note (TN9), Copper Development Association, London.Suche in Google Scholar
7 Pratt, G. C.: Int. Met. Rev. 18 (1973) 1 – 27.10.1179/imr.1973.18.2.62Suche in Google Scholar
8 D. J. Davies, Oelmann, L. A. (eds.): The Structure, Properties and Heat Treatment of Metals, Pitman Books, London. (1983) 143 – 170.Suche in Google Scholar
9 Prasad, B. K.: Structure – Property Correlations in Some Copper-and Zinc-based Bearing Alloys, Ph.D. Thesis, University of Roorkee, Roorkee, India (1994).Suche in Google Scholar
10 Prasad, B. K.: Z. Metallkd. 87 (1996) 226 – 232.Suche in Google Scholar
11 Prasad, B.K.; Patwardhan, A. K.; Yegneswaran, A. H.: Mater. Sci. Technol. 12 (1996) 427 – 435.10.1179/026708396790165885Suche in Google Scholar
12 Modi, O. P.; Prasad, B. K.; Yegneswaran, A. H.; Vaidya, M. L.: Mater. Sci. Engn. 151A (1992) 235 – 245.10.1016/0921-5093(92)90212-JSuche in Google Scholar
13 Das, S.; Prasad, S. V.; Ramachandran, T. R.: Mater. Sci. Engn. 144A (1991) 229 – 235.10.1016/0921-5093(91)90229-GSuche in Google Scholar
14 Prasad, B. K.; Das, S.: Mater. Sci. Engn. 138A (1991) 123 – 132.10.1016/0921-5093(91)90682-DSuche in Google Scholar
15 Das, S.; Prasad, B. K.: Wear. 162 – 164 (1993) 64 – 74.10.1016/0043-1648(93)90485-5Suche in Google Scholar
16 Lee, P. P.; Savaskan, T.; Laufer, E.: Wear. 117 (1987) 79 – 89.10.1016/0043-1648(87)90245-6Suche in Google Scholar
17 C. R. Brooks, (ed.): Heat Treatment, Structure and Properties of Nonferrous Alloys, ASM, Metals Park, OH (1982) 275 – 327.Suche in Google Scholar
18 E. Rabinowicz, (ed.): Friction and Wear of Materials, John Wiley and Sons Inc. NY, 1982, 84 – 131.Suche in Google Scholar
19 Glaeser, W. A.: Proc. Int. Conf. Wear Mater., Vol. I, in: K.C. Ludema (ed.), April 9 – 13, 1989, Denver, USA, American Society of Mechanical Engineers (1989) 255 – 260.Suche in Google Scholar
20 Pathak, J. P.; Tiwari, S. N.: Wear. 155 (1992) 37 – 47.10.1016/0043-1648(92)90107-JSuche in Google Scholar
21 Metals Handbook, Vol. 8, 8th ed., ASM, Metals Park, OH, (1973) 251 – 376.Suche in Google Scholar
22 R. A. Flinn, (ed.): Copper, Brass and Bronze Castings: Their Structure, Properties and Applications, 2nd ed., Non – Ferrous Foundry Society Inc.,. OH (1963) 49 – 65.Suche in Google Scholar
23 A. R. Bailey; L. E. Samuels (eds.): Foundry Metallography: An Elementary Analysis of Microstructure and Properties of Selected Foundry Alloys, Metallurgical Services, Betchworth, Surrey, England (1976).Suche in Google Scholar
24 Murphy, S.; Savaskan, T.: Wear. 98 (1984) 151 – 161.10.1016/0043-1648(84)90224-2Suche in Google Scholar
25 Savaskan, T.; Murphy, S.: Wear. 116 (1987) 211 – 224.10.1016/0043-1648(87)90234-1Suche in Google Scholar
26 Metals Handbook, Vol. 2, 9th ed., ASM, Metals Park, OH (1979) 395 – 439.Suche in Google Scholar
27 F.E. Goodwin; A. L. Ponikvar (eds.): Engineering Properties of Zinc Alloys, 3rd ed. ILZRO,. NC (1988) 73 – 133.Suche in Google Scholar
28 A. G. Gulyaev (ed.): Physical Metallurgy, Vol. 1, 1st ed., Mir Publishers, Moscow (1980) 154 – 174.Suche in Google Scholar
29 A. G. Gulyaev (ed.): Physical Metallurgy, Vol. 2, end ed., Mir Publishers, Moscow (1980) 234 – 300.Suche in Google Scholar
30 C. J. Smithells (ed.): Metals Reference Book, 5th ed., Butterworth, London (1978) 940 – 960.Suche in Google Scholar
31 Pathak, J. P.: Mater. Sci. Techn. 9 (1993) 403 – 407.10.1179/mst.1993.9.5.403Suche in Google Scholar
32 Majumdar, B. S.; Yegneswaran, A. H.; Rohatgi, P. K.: Mater. Sci. Engn. 68 (1984) 85 – 96.10.1016/0025-5416(84)90246-5Suche in Google Scholar
33 Wert, J. J.; Singerman, S. A.; Caldwell, S. G.; Chaudhuri, D. K.: Wear. 92 (1983) 213 – 229.10.1016/0043-1648(83)90196-5Suche in Google Scholar
34 Rigney, D. A.; Hirth, J. P.: Wear. 53 (1979) 345 – 370.10.1016/0043-1648(79)90087-5Suche in Google Scholar
35 Rice, S. L.; Nowotny, H.; Wayne, S. F.: Wear. 74 (1981) 131 – 142.10.1016/0043-1648(81)90199-XSuche in Google Scholar
36 Rigney, D. A.; Chen, L. H.; Naylor, M. G. S.; Rosenfield, A. R.: Wear. 100 (1984) 195 – 219.10.1016/0043-1648(84)90013-9Suche in Google Scholar
37 Eyre, T. S.; Baxter, A.: Tribology (1972) 256 – 261.10.1016/0041-2678(72)90104-2Suche in Google Scholar
© 1997 Carl Hanser Verlag, München
Artikel in diesem Heft
- Frontmatter
- Aufsätze
- Automatic Determination of Dendritic Arm Spacing in Directionally Solidified Matters
- Microstructure and Mechanical Properties of Titanium Castings
- Microstructural Features Controlling the Dry Sliding Wear Response of Some Bearing Alloys
- Correlation of Microstructure and Giant Magnetoresistance in Electrodeposited Ni – Cu/Cu Multilayers
- Microstructure-related Modelling of the Deformation Behaviour of the Superalloy CoCr22Ni22W14
- An Assessment of the Si Mobility and the Application to Phase Transformations in Silicon Steels
- Simulated Weld HAZ of Vanadium Modified 2.25Cr-1Mo Steel
- The Metastable Miscibility Gap in the System Fe–Cu
- Precipitation in Iron Aluminides Containing Carbon and Titanium, Zirconium or Niobium
- Use of a Single Zirconia Electrolyte Cell to Measure Basicity in Binary and Ternary Carbonate Melts
- Adsorption Studies of Water on Copper, Nickel, and Iron: Assessment of the Polarization Model
- Mitteilungen der Deutschen Gesellschaft für Materialkunde e.V
- Personen
- Terminkalender
Artikel in diesem Heft
- Frontmatter
- Aufsätze
- Automatic Determination of Dendritic Arm Spacing in Directionally Solidified Matters
- Microstructure and Mechanical Properties of Titanium Castings
- Microstructural Features Controlling the Dry Sliding Wear Response of Some Bearing Alloys
- Correlation of Microstructure and Giant Magnetoresistance in Electrodeposited Ni – Cu/Cu Multilayers
- Microstructure-related Modelling of the Deformation Behaviour of the Superalloy CoCr22Ni22W14
- An Assessment of the Si Mobility and the Application to Phase Transformations in Silicon Steels
- Simulated Weld HAZ of Vanadium Modified 2.25Cr-1Mo Steel
- The Metastable Miscibility Gap in the System Fe–Cu
- Precipitation in Iron Aluminides Containing Carbon and Titanium, Zirconium or Niobium
- Use of a Single Zirconia Electrolyte Cell to Measure Basicity in Binary and Ternary Carbonate Melts
- Adsorption Studies of Water on Copper, Nickel, and Iron: Assessment of the Polarization Model
- Mitteilungen der Deutschen Gesellschaft für Materialkunde e.V
- Personen
- Terminkalender
