Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Selecting Continuous Compounding Equipment Based on Process Considerations
-
E. L. Canedo
Veröffentlicht/Copyright:
27. Mai 2013
Abstract
The most widely used pieces of equipment in plastics compounding are continuous mixers and intermeshing corotating twin-screw extruders. Key design aspects and processing characteristics of these two machines are compared and examples of processing typical compounds in both types of equipment are presented and discussed.
Received: 1994-3-30
Accepted: 1994-5-6
Published Online: 2013-05-27
Published in Print: 1994-09-01
© 1994, Carl Hanser Verlag, Munich
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Tenth in a Series: Fried. Krupp: Pioneer Integrated Steel and Processing Machinery Manufacturer. Part 1. Essen, Magdeburg and Harburg (1812–1960)
- Internal Mixers
- Finite Element Modelling of Non-isothermal Viscometric Flows in Rubber Mixing
- Screw Extrusion and Mixing
- The Optimisation of Masterbatch Formulations for Use in Single Screw Machines
- Morphological Changes of a Polymer Blend into a Twin-Screw Extruder
- An In-line Melt Rheometer for Molten Plastics
- Selecting Continuous Compounding Equipment Based on Process Considerations
- Reactive Processing
- Peroxide Induced and Thermal Degradation of Polypropylene
- Reactive Blending of Polyamide 6 and Polycarbonate
- Modification of Polypropylene by Maleic Anhydride
- Fibers and Films
- Melt Strength Behaviour of Polypropylenes
- Molding
- Multilayer Injection Moulding
- Miscibility and Mechanical Properties of Poly(ether imide)/Liquid Crystalline Poly(ester imide) Blends
- The Effects of Recycling and Degradation on Parison Extrusion
- Modeling and Simulation of High Reynolds' Number Flows During Reaction Injection Mold Filling
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Tenth in a Series: Fried. Krupp: Pioneer Integrated Steel and Processing Machinery Manufacturer. Part 1. Essen, Magdeburg and Harburg (1812–1960)
- Internal Mixers
- Finite Element Modelling of Non-isothermal Viscometric Flows in Rubber Mixing
- Screw Extrusion and Mixing
- The Optimisation of Masterbatch Formulations for Use in Single Screw Machines
- Morphological Changes of a Polymer Blend into a Twin-Screw Extruder
- An In-line Melt Rheometer for Molten Plastics
- Selecting Continuous Compounding Equipment Based on Process Considerations
- Reactive Processing
- Peroxide Induced and Thermal Degradation of Polypropylene
- Reactive Blending of Polyamide 6 and Polycarbonate
- Modification of Polypropylene by Maleic Anhydride
- Fibers and Films
- Melt Strength Behaviour of Polypropylenes
- Molding
- Multilayer Injection Moulding
- Miscibility and Mechanical Properties of Poly(ether imide)/Liquid Crystalline Poly(ester imide) Blends
- The Effects of Recycling and Degradation on Parison Extrusion
- Modeling and Simulation of High Reynolds' Number Flows During Reaction Injection Mold Filling
