Erratum

Artikel in diesem Heft

1. Contents
2. Contents
3. Internal and Continuous Mixers
4. Model Development for an Internal Mixer
5. Simulation of Flow in a Farrel Continuous Mixer
6. Extrusion
7. Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h
8. Conveying and Melting in Screw Extruders with Axial Screw Movement
9. Thermo-viscous Effects in Extrusion of Planar Jets with Solidification
10. Film
11. Dynamics and Stability of Double Bubble Tubular Film Extrusion
12. Melt Strength Behavior of Polyethylene Blends**
13. Optical Properties and Orientation Development in Uniaxially Stretched Syndiotactic Polystyrene from Amorphous Precursors
14. Molding
15. Thermoviscoelastic Calculation of Residual Stresses and Residual Shapes of Injection Molded Parts**
16. Analysis and Simulation of Structural Reaction Injection Molding (SRIM)
17. Crystal Orientation in Injection Moldings of Flaky Filler-Filled Polypropylenes
18. Erratum
19. Molecular Orientation in Injection-molded Polypropylene Copolymers with Ethylene