Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Simulation of Flow in a Farrel Continuous Mixer
-
M. H. Kim
Veröffentlicht/Copyright:
27. Mai 2013
Abstract
The Farrel Continuous Mixer has been an important compounding machine for a quarter century. There have, until this time, been no efforts to simulate flow in this machine. We apply a hydrodynamic lubrication theory-based analysis to this problem. We present a model of flow in a Farrel Continuous Mixer which predicts pressure and flux profiles for a fully filled machine. Calculations are reported for both Newtonian and non-Newtonian models.
Received: 1990-12-18
Accepted: 1991-1-25
Published Online: 2013-05-27
Published in Print: 1992-03-01
© 1992, Carl Hanser Verlag, Munich
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Contents
- Contents
- Internal and Continuous Mixers
- Model Development for an Internal Mixer
- Simulation of Flow in a Farrel Continuous Mixer
- Extrusion
- Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h
- Conveying and Melting in Screw Extruders with Axial Screw Movement
- Thermo-viscous Effects in Extrusion of Planar Jets with Solidification
- Film
- Dynamics and Stability of Double Bubble Tubular Film Extrusion
- Melt Strength Behavior of Polyethylene Blends**
- Optical Properties and Orientation Development in Uniaxially Stretched Syndiotactic Polystyrene from Amorphous Precursors
- Molding
- Thermoviscoelastic Calculation of Residual Stresses and Residual Shapes of Injection Molded Parts**
- Analysis and Simulation of Structural Reaction Injection Molding (SRIM)
- Crystal Orientation in Injection Moldings of Flaky Filler-Filled Polypropylenes
- Erratum
- Molecular Orientation in Injection-molded Polypropylene Copolymers with Ethylene
Artikel in diesem Heft
- Contents
- Contents
- Internal and Continuous Mixers
- Model Development for an Internal Mixer
- Simulation of Flow in a Farrel Continuous Mixer
- Extrusion
- Influence of Process Data on the Throughput of Large Extruders within the Range of 600 to 6 000 kg/h
- Conveying and Melting in Screw Extruders with Axial Screw Movement
- Thermo-viscous Effects in Extrusion of Planar Jets with Solidification
- Film
- Dynamics and Stability of Double Bubble Tubular Film Extrusion
- Melt Strength Behavior of Polyethylene Blends**
- Optical Properties and Orientation Development in Uniaxially Stretched Syndiotactic Polystyrene from Amorphous Precursors
- Molding
- Thermoviscoelastic Calculation of Residual Stresses and Residual Shapes of Injection Molded Parts**
- Analysis and Simulation of Structural Reaction Injection Molding (SRIM)
- Crystal Orientation in Injection Moldings of Flaky Filler-Filled Polypropylenes
- Erratum
- Molecular Orientation in Injection-molded Polypropylene Copolymers with Ethylene
