Mechanical and Thermal Properties of Teak Wood Flour/Starch Filled High Density Polyethylene Composites

References

Balamurugan, G. P., Maiti, S. N., “Effects of Nanotalc Inclusion on Mechanical, Microstructural, Melt Shear Rheological, and Crystallization Behavior of Polyamide 6-Based Binary and Ternary Nanocomposites”, Polym. Eng. Sci., 50, 1978–1993 (2010) 10.1002/pen.21724Suche in Google Scholar

Bharath, K. N., Basavarajappa, S., “Applications of Biocomposite Materials Based on Natural Fibers from Renewable Resources: A Review”, Sci. Eng. Compos. Mater., 23, 123–133 (2016) 10.1515/secm-2014-0088Suche in Google Scholar

Biswas, K., Palsule, S., “Bamboo Fibre-Reinforced Self-Compatibilizing Functionalized Polypropylene Composites by Palsule Process”, Polym. Polym. Compos., 24, 663–674 (2016) 10.1177/096739111602400805Suche in Google Scholar

Biswas, K., Palsule, S., “Structure and Properties of Bamboo Fiber/Self Compatibilizing Polypropylene Composites by Palsule Process”, INROADS-An International Journal of Jaipur National University, 5, 172–177 (2015) 10.5958/2277-4912.2016.00032.1Suche in Google Scholar

Bledzki, A. K., Reihmane, S. and Gassan, J., “Properties and Modification Methods for Vegetable Fibers for Natural Fiber Composites”, J. Appl. Polym. Sci., 59, 1329–1336 (1996) 10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-0Suche in Google Scholar

Bledzki, A., Gassan, J., “Composites Reinforced with Cellulose Based Fibres”, Prog. Polym. Sci., 24, 221–274 (1999) 10.1016/S0079-6700(98)00018-5Suche in Google Scholar

Brewis, D. M., Mathieson, I.: Adhesion and Bonding to Polyolefins, Smithers Rapra Publishing, Shropshire, UK (2002)Suche in Google Scholar

Catto, A. L., Stefani, B. V., Ribeiro, V. F. and Santana, R. M. C., “Influence of Coupling Agent in Compatibility of Post-Consumer HDPE in Thermoplastic Composites Reinforced with Eucalyptus Fiber”, Materials Research., 17, 203–209 (2014) 10.1590/S1516-14392014005000036Suche in Google Scholar

Delgado, P. S., Lana, S. L. B., Ayres, E., Potricio, P. O. S. and Orefice, R. L., “The Potential of Bamboo in the Design of Polymer Composites”, Mater. Res., 15, 639–644 (2012) 10.1590/S1516-14392012005000073Suche in Google Scholar

George, M., Chae, M. and Bressler, D. C., “Composite Materials with Bast Fibres: Structural, Technical, and Environmental Properties”, Prog. Mater. Sci, 83, 1–23 (2016) 10.1016/J.PMATSCI.2016.04.002Suche in Google Scholar

George, M., Chae, M. and Bressler, D. C., “Composite Materials with Bast Fibres: Structural, Technical, and Environmental Properties”, Prog. Mater. Sci., 83, 1–23 (2016) 10.1016/J.PMATSCI.2016.04.002Suche in Google Scholar

Guimaraes, J. L., Wypych, F. and Saul, C. K., “Studies of the Processing and Characterization of Corn Starch and its Composites with Banana and Sugarcane Fibers from Brazil”, Carbohydr. Polym., 80, 130–138 (2010) 10.1016/J.CARBPOL.2009.11.002Suche in Google Scholar

Gupta, M. K., Srivastava, R. K., “Effect of Sisal Fibre Loading on Dynamic Mechanical Analysis and Water Absorption Behaviour of Jute Fibre Epoxy Composite”, Materials Today: Proceedings., 2, 2909–2917(2015) 10.1016/j.matpr.2015.07.253Suche in Google Scholar

Gwon, J. G., Lee, S. Y., Kang, H. and Kim, J. H., “Effects of Sizes and Contents of Exothermic Foaming Agent on Physical Properties of Injection Foamed Wood Fiber/HDPE Composites”, Int. J. Precis. Eng. Manuf., 13, 1003–1007 (2012) 10.1007/s12541-012-0130-3Suche in Google Scholar

Jang, B. C., Huh, S. Y., Jang, J. G. and Bae, Y. C., “Mechanical Properties and Morphology of the Modified HDPE/Starch Reactive Blend”, J. Appl. Polym. Sci., 82, 3313–3320 (2001) 10.1002/app.2190Suche in Google Scholar

Jawaid, M., Khalil, A. H. P. S., Hassan, A., Dungani, R. and Hadiyane, A., “Effect of Jute Fibre Loading on Tensile and Dynamic Mechanical Properties of Oil Palm Epoxy Composites”, Composites Part B, 45, 619–624 (2013) 10.1016/J.CompositesB.2012.04.068Suche in Google Scholar

Jose, S., Aprem, A., Francis, B., Candy, M. C., Werner, P., Alstadedt, V. and Thomas, S., “Phase Morphology, Crystallisation Behaviour and Mechanical Properties of Isotactic Polypropylene/High Density Polyethylene Blends”, Eur. Polym. J., 40, 2105–2115 (2004) 10.1016/j.eurpolymj.2004.02.026Suche in Google Scholar

Joshi, M., Misra, A. and Maiti, S. N., “Polybutylene Terephthalate/High-Density Polyethylene Alloys. I. Morphological Studies”, J. Appl. Polym. Sci., 43, 311–328 (1991) 10.1002/app.1991.070430210Suche in Google Scholar

Joshi, S., Drzal, L., Mohanty, A. and Arora, S., “Are Natural Fiber Composites Environmentally Superior to Glass Fiber Reinforced Composites”, Composites Part A, 35, 371–376 (2004) 10.1016/J.COMPOSITESA.2003.09.016Suche in Google Scholar

Kajaks, J., “Some Exploitation Properties of Wood Plastic Composites (WPC), Based on High Density Polyethylene and Timber Industry Waste”, Mater. Sci., 21, 396–399 (2015) 10.5755/j01.ms.21.3.7283Suche in Google Scholar

Keener, T., Stuart, R. and Brown, T., “Maleated Coupling Agents for Natural Fibre Composites”, Composites Part A, 35, 357–362 (2003) 10.1016/J.COMPOSITESA.2003.09.014Suche in Google Scholar

Khalil, A. H. P. S., Saurabh, C. K., A. S. A., Fazita, N. M. R., Syakir, M. I., Davoudpour, Y., Rafatullah, M., Abdullah, C. K., Haafiz, M. M. K. and Dungani, R., “A Review on Chitosan-Cellulose Blends and Nanocellulose Reinforced Chitos an Bio Composites: Properties and their Applications”, Carbohydr. Polym., 150, 216–226 (2016)PMid:27312632; 10.1016/j.carbpol.2016.05.028Suche in Google Scholar

Koenig, M. F., Huang, S. J., “Biodegradable Blends and Composites of Polycaprolactone and Starch Derivatives”, Polymer, 36, 1877–1882 (1995) 10.1016/0032-3861(95)90934-TSuche in Google Scholar

Lewis, T. B., Nielsen, L. E., “Dynamic Mechanical Properties of Particulate-Filled Composites”, J. Appl. Polym. Sci., 14, 1449–1471 (1970) 10.1002/app.1970.070140604Suche in Google Scholar

Li, Q., Matuana, L. M., “Effectiveness of Maleated and Acrylic Acid-Functionalized Polyolefin Coupling Agents for HDPE-Wood-Flour Composites”, J. Thermoplast. Compos. Mater., 16, 551–564 (2003) 10.1177/089270503033340Suche in Google Scholar

Li, Q., Matuana, L. M., “Surface of Cellulosic Materials Modified with Functionalized Polyethylene Coupling Agents”, J. Appl. Polym. Sci., 88, 278–286 (2003) 10.1002/app.11681Suche in Google Scholar

Lu, J. Z., Wu, Q. and Negulescu, I. I., “Wood-Fiber/High-Density-Polyethylene Composites: Coupling Agent Performance”, J. Appl. Polym. Sci., 96, 93–102 (2005) 10.1002/app.21410Suche in Google Scholar

Mengeloglu, F., Karakus, K., “Some Properties of Eucalyptus Wood Flour Filled Recycled High Density Polyethylene Polymer-Composites”, Turkish Journal of Agriculture and Forestry, 32, 537–546 (2014)Suche in Google Scholar

Mohanty, S., Nayak, S. K., “Short Bamboo Fiber-Reinforced HDPE Composites: Influence of Fiber Content and Modification on Strength of The Composite”, J. Reinf. Plast. Compos., 29, 2199–2210 (2010) 10.1177/0731684409345618Suche in Google Scholar

Morris, B. A., Wilmington, D., “Effect of Post Die Processing Time on Adhesion in Co-Extrusion Blown and Cast Film”, Company Information, Du Pont, Delaware, USA (2010)Suche in Google Scholar

Nachtigall, S. M. B., Cerveira, G. S. and Rosa, S. M. L., “New Polymeric-Coupling Agent for Polypropylene/Wood-Flour Composites”, Polym. Test., 26, 619–628 (2007) 10.1016/j.polymertesting.2007.03.007Suche in Google Scholar

Pasquini, D., De Morais Teixeira, E., Da Silva Curvelo, A. A., Belgacem, M. N. and Dufresne, A., “Surface Esterification of Cellulose Fibres: Processing and Characterisation of Low-Density Polyethylene/Cellulose Fibres Composites”, Compos. Sci. Technol., 68, 193–201 (2008) 10.1016/j.compscitech.2007.05.009Suche in Google Scholar

Pothan, L. A., Oommen, Z. and Thomas, S., “Dynamic Mechanical Analysis of Banana Fiber Reinforced Polyester Composites”, Compos. Sci. and Technol., 63283–293 (2003), DOI.Org/10.1016/S0266-3538(02)00254-310.1016/S0266-3538(02)00254-3Suche in Google Scholar

Priyanka, Palsule S., “Banana Fiber/Chemically Functionalized Polypropylene Composites with in-situ Fiber/Matrix Interfacial Adhesion by Palsule Process”, Compos. Interfaces, 20, 309–329 (2013) 10.1080/15685543.2013.799012Suche in Google Scholar

Rodriguez-Gonzalez, F., Ramsay, B. and Favis, B., “High Performance LDPE/Thermoplastic Starch Blends: A Sustainable Alternative to Pure Polyethylene”, Polymer, 44, 1517–1526 (2003) 10.1016/S0032-3861(02)00907-2Suche in Google Scholar

Sailaja, R. R. N., Chanda, M., “Use of Maleic Anhydride-Grafted Polyethylene as Compatibilizer for HDPE-Tapioca Starch Blends: Effects on Mechanical Properties”, J. Appl. Polym. Sci., 80, 863–872 (2001) 10.1002/1097-4628(20010509)80:6<863::AID-APP1164>3.0.CO;2-RSuche in Google Scholar

Sathishkumar, T. P., Naveentha Krishnan, P. and Shankar, S., “Characterization of Natural Fiber and Composites – A Review”, J. Reinf. Plast. Compos., 32, 1457–1476 (2013) 10.1177/0731684413495322Suche in Google Scholar

Selke, S. E., Wichman, I., “Wood Fiber/Polyolefin Composites”, Composites Part A, 35, 321–326 (2004) 10.1016/J.COMPOSITESA.2003.09.010Suche in Google Scholar

Sewda, K., Maiti, S. N., “Crystallization and Melting Behavior of HDPE in HDPE/Teak Wood Flour Composites and their Correlation with Mechanical Properties”, J. Appl. Polym. Sci., 115, 2264–2275 (2010) 10.1002/app.30551Suche in Google Scholar

Sewda, K., Maiti, S. N., “Dynamic Mechanical Properties of High Density Polyethylene and Teak Wood Flour Composites”, Polym. Bull, 70, 2657–2674 (2013) 10.1007/s00289-013-0941-0Suche in Google Scholar

Sharif, A., Aalaie, J. and Shariatpanahi, H., “Fabrication of a Novel Polyethylene/Starch Blend through Mediation of a High-Energy Ball Milling Process: Mechanical Properties and Formation Mechanism”, J. Appl. Polym. Sci., 128, 145–152 (2013) 10.1002/app.38155Suche in Google Scholar

Sharma, R., Maiti, S. N., “Effects of Crystallinity of Polypropylene (PP) on the Mechanical Properties of PP/Styrene-Ethylene-Butylene-Styrene-G-Maleic Anhydride (SEBS-G-MA)/Teak Wood Flour (TWF) Composites” Polym. Bull., 72, 627–643 (2015) 10.1007/S00289-014-1296-xSuche in Google Scholar

Shih, Y.-F., “Mechanical and Thermal Properties of Waste Water Bamboo Husk Fiber Reinforced Epoxy Composites”, Mater. Sci. Eng., A, 445–446, 289–295 (2007) 10.1016/j.msea.2006.09.032Suche in Google Scholar

Shogren, R. L., Doane, W. M. and Garlotta, D., “Biodegradation of Starch/Polylactic Acid/Poly(hydroxyester-ether) Composite Bars in Soil”, Polym. Degrad. Stab., 79, 405–411 (2003) 10.1016/S0141-3910(02)00356-7Suche in Google Scholar

Singh, A. A., Palsule, S., “Coconut Fiber Reinforced Chemically Functionalized High-Density Polyethylene (CNF/CF-HDPE) Composites by Palsule Process”, J. Compos. Mater., 48, 3673–3684 (2014) 10.1177/0021998313513045Suche in Google Scholar

Singh, A. A., Palsule, S., “Jute Fiber Reinforced Chemically Functionalized Polypropylene Self-Compatibilizing Composites by Palsule Process”, J. Compos. Mater., 50, 1199–1212 (2016) 10.1177/0021998315590260Suche in Google Scholar

Singh, A. A., Priyanka and Biswas, K., “Structure, Mechanical and Thermal Properties of Coconut Fiber Reinforced Polypropylene Composites with 2% MAPP as a Compatibilizer”, Appl. Polym. Compos., 2, 109–119 (2014)Suche in Google Scholar

Stark, N. M., Matuana, L. M., “Surface Chemistry Changes of Weathered HDPE/Wood-Flour Composites Studied by XPS and FTIR Spectroscopy”, Polym. Degrad. Stab., 86, 1–9 (2004) 10.1016/J.Polymdegradstab.2003.11.002Suche in Google Scholar

Stark, N. M., Matuana, L. M., “Ultraviolet Weathering of Photostabilized Wood-Flour-Filled High-Density Polyethylene Composites”, J. Appl. Polym. Sci., 90, 2609–2617 (2003) 10.1002/app.12886Suche in Google Scholar

Thwe, M. M., Liao, K., “Durability of Bamboo-Glass Fiber Reinforced Polymer Matrix Hybrid Composites”, Compos. Sci. Technol., 63, 375–387 (2003) 10.1016/S0266-3538(02)00225-7Suche in Google Scholar

Tomar, N., Maiti, S. N., “Thermal and Crystallization Properties of PBT/ABAS Blends”, J. Appl. Polym. Sci., 113, 1657–1663 (2009) 10.1002/app.30172Suche in Google Scholar

Turi, E. A.: Thermal Characterization of Polymeric Materials, Academic Press, New Jersey, USA (1981)Suche in Google Scholar

Vaisanen, T., Haapala, A., Lappalainen, R. and Tomppo, L., “Utilization of Agricultural and Forest Industry Waste and Residues in Natural Fiber-Polymer Composites: A Review”, Waste Manage., 54, 62–73 (2016)PMid:27184447; 10.1016/J.WASMAN.2016.04.037Suche in Google Scholar

Vallejos, M. E., Curvelo, A. A. S. and Teixeira, E. M., “Composite Materials of Thermoplastic Starch and Fibers from the Ethanol–Water Fractionation of Bagasse”, Ind. Crops Prod., 33, 739–746 (2011) 10.1016/J.INDCROP.2011.01.014Suche in Google Scholar

Vallejos, M. E., Curvelo, A. S., Teixeira, E. M., Mendes, F. M., Carvalho, A. J. F., Felissia, F. E. and Area, M. C., “Composite Materials of Thermoplastic Starch and Fibers from the Ethanol–Water Fractionation of Bagasse”, Ind. Crops Prod., 33, 739–746 (2011) 10.1016/j.indcrop.2011.01.014Suche in Google Scholar

Vinhas, G. M., De Lima, S. M., Santos, L. A., De Lima, G. A. M. A. and De Almeida, Y. M. B., “Evaluation of the Types of Starch for Preparation of LDPE/Starch Blends”, Brazilian Archives of Biology and Technology, 50, 361–370 (2007) 10.1590/S1516-89132007000300001Suche in Google Scholar

Wang, W.-H., Huang, H.-B., Du, H.-H. and Wang, H., “Effects of Fiber Size on Short-Term Creep Behavior of Wood Fiber/HDPE Composites”, Polym. Eng. Sci., 55, 693–700 (2015) 10.1002/pen.23935Suche in Google Scholar

Wunderlich, B.: Thermal Analysis of Polymeric Materials, Springer, Berlin, Heidelberg, New York (2005) 10.1007/b137476Suche in Google Scholar

Xu, Y., Wu, Q. and Lei, Y., “Natural Fiber Reinforced Poly(vinyl chloride) Composites: Effect of Fiber Type and Impact Modifier”, J. Polym. Environ., 16, 250–257 (2008) 10.1007/s10924-008-0113-8Suche in Google Scholar

Zhang, M. Q., Rong, M. Z. and Lu, X., “Fully Biodegradable Natural Fiber Composites from Renewable Resources: All-Plant Fiber Composites”, Compos. Sci. Technol., 65, 2514–2525 (2005) 10.1016/J.compscitech.2005.06.018Suche in Google Scholar