Startseite Development of Styrenic Copolymers for Improving Heat Resistance of Poly(methyl methacrylate)
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Development of Styrenic Copolymers for Improving Heat Resistance of Poly(methyl methacrylate)

  • K. Nishino , Y. Shindo , Y. Kurokawa , T. Takayama und H. Ito
Veröffentlicht/Copyright: 23. Juni 2016
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 31 Heft 3

Abstract

Styrenic copolymers comprising styrene, methyl methacrylate, and maleic anhydride were developed to improve the heat-resistance property of poly(methyl methacrylate) (PMMA). The optical, thermal, and mechanical properties were examined for the blend specimens prepared by an injection-molding machine using melt-mixed samples. It was found that the copolymers, which were miscible with PMMA, increase the glass transition temperature and therefore the Vicat Softening temperature. Furthermore, the blends were completely transparent as similar to PMMA.

*Correspondence address, Mail address: Kohhei Nishino, Denka Company Limited, 6 Goi-minamikaigan, Ichihara, Chiba, Japan. E-mail:

References

Aelmans, N. J. J., Reid, V. M. C. and Higgins, J. S., “Change of Phase Behaviour of SMA/PMMA Blends during Processing at High Deformation Rate”, Polymer, 40, 5051–5062 (1999) 10.1016/S0032-3861(98)00702-2Suche in Google Scholar

Aelmans, N. J. J., Reid, V. M. C. and Higgins, J. S., “Phase Behaviour of SMA/PMMA blends: The Influence of Processing at Low and High Deformation Rates”, Macromol. Symp., 149, 53–62 (2000) 10.1002/1521-3900(200001)149:1Suche in Google Scholar

Brannock, G. R., Barlow, J. W. and Paul, D. R., “Blends of Styrene/Maleic Anhydride Copolymers of with Polymethacrylates”, J. Polym. Sci., Part B: Polym. Phys., 29, 413–429 (1991) 10.1002/polb.1991.090290404Suche in Google Scholar

Chopra, D., Vlassopoulos, D. and Hatzikiriakos, S. G., “Shear-Induced Mixing and Demixing in Poly(styrene-co-maleic anhydride)/Poly-(methyl methacrylate) Blends”, J. Rheol., 42, 1227–1247 (1998) 10.1007/978-3-642-51062-5_26Suche in Google Scholar

Chopra, D., Vlassopoulos, D. and Hatzikiriakos, S. G., “Flow-Induced Morphological Changes in Poly(styrene-co-maleic anhydride)/Poly(methyl methacrylate) Blends”, SPE ANTEC Tech. Papers, 57, 1190–1194 (1999)Suche in Google Scholar

Chopra, D., Kontopoulou, M., Vlassopoulos, D. and Hatzikiriakos, S. G., “Effect of Maleic Anhydride Content on the Rheology and Phase Behavior of Poly(styrene-co-maleic anhydride)/poly(methyl methacrylate) Blends”, Rheol. Acta, 41, 10–24 (2002) 10.1007/s003970200001Suche in Google Scholar

Douglass, S. K., “Chapter 10 Viscoelastic Characterization of Polymer Blends”, in Polymer Blends, Paul, D. R., BucknallC.B. (Eds.), John Wiley and Sons, New York, p. 291–317 (2000)Suche in Google Scholar

Feng, H., Shen, L. and Feng, Z., “Miscibility of Homopolymer/Random Copolymer Blends – 2. SMA/PMMA Blends”, Eur. Polym. J., 31, 243–249 (1995) 10.1016/0014-3057(94)00160-XSuche in Google Scholar

Gan, P. P., Paul, D. R., “Phase Behavior of Blends of Styrene/Maleic Anhydride Copolymers”, J. Appl. Polym. Sci., 54, 317–331 (1994) 10.1002/app.1994.070540306Suche in Google Scholar

Hartig, S. M., Scheerhoorn, M., “New SMA Materials for Automotive Applications”, SPE ANTEC Tech. Papers, 50, 687–689 (1992)Suche in Google Scholar

Rojanapitayakorn, P., Thongyai, S. and Covavisaruch, S., “Phase Separation of Off-Critical Polymer Blends of Poly(styrene-co-maleic anhydride) and Poly(methyl methacrylate). I. Kinetics of Spinodal Decomposition”, J. Polym. Sci., Part B: Polym. Phys., 42, 871–885 (2004) 10.1002/polb.10746Suche in Google Scholar

Rojanapitayakorn, P., Thongyai, S. and Covavisaruch, S., “Phase Separation of Off-Critical Polymer Blends of Poly(styrene-co-maleic anhydride) and Poly(methyl methacrylate). II. Morphology and Mechanical Properties”, J. Polym. Sci., Part B: Polym. Phys., 42, 886–897 (2004) 10.1002/polb.10747Suche in Google Scholar

Vlassopoulos, D., “Rheology of Critical LCST Polymer Blend: Poly-(styrene-co-maleic anhydride)/(polymethyl methacrylate)”, Rheol. Acta, 35, 556–566 (1996) 10.1007/BF00396507Suche in Google Scholar

Received: 2015-09-29
Accepted: 2016-02-20
Published Online: 2016-06-23
Published in Print: 2016-07-30

© 2016, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Estimation of Bulk Melt-Temperature from In-Mold Thermal Sensors for Injection Molding, Part B: Validation
  5. Online Measurement of Electrospinning Jet Velocity of Polyvinyl Alcohol
  6. Rheological Characterization and Thermal Stability of Different Intrinsic Viscosity Poly(ethylene terephthalate) in Air and Nitrogen
  7. Ethylene Methyl Acrylate Copolymer Toughened Poly(lactic acid) Blends: Phase Morphologies, Mechanical and Rheological Properties
  8. Comparative Effects of mEOC on the Structures and Properties of PP/SGF and PP/EOC/SGF Composite Foams
  9. Development of Styrenic Copolymers for Improving Heat Resistance of Poly(methyl methacrylate)
  10. Study of Dispersive and Distributive Mixing in a Converging Pipe
  11. Investigation of Surface Roughness and MRR for Engineering Polymers with the Abrasive Water Jet Turning Process
  12. Recycling the Cork Powder in a PVC-Based Composite Material: Combined Effect on Physico-Mechanical and Thermal Properties
  13. Influences on the Magnetic Properties of Injection Molded Multipolar Rings
  14. PMMA Micro-Pillar Forming in Micro Channel by Hot Embossing
  15. Experimental Investigation and Modeling of a New High Speed Coating Process
  16. Statistical Approach to Analyze the Warpage, Shrinkage and Mechanical Strength of Injection Molded Parts
  17. Optical Properties of HDPE in Injection Molding and Injection Press Molding for IR System Lenses
  18. PPS News
  19. PPS News
  20. Seikei Kakou Abstracts
  21. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.3180

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Estimation of Bulk Melt-Temperature from In-Mold Thermal Sensors for Injection Molding, Part B: Validation
  5. Online Measurement of Electrospinning Jet Velocity of Polyvinyl Alcohol
  6. Rheological Characterization and Thermal Stability of Different Intrinsic Viscosity Poly(ethylene terephthalate) in Air and Nitrogen
  7. Ethylene Methyl Acrylate Copolymer Toughened Poly(lactic acid) Blends: Phase Morphologies, Mechanical and Rheological Properties
  8. Comparative Effects of mEOC on the Structures and Properties of PP/SGF and PP/EOC/SGF Composite Foams
  9. Development of Styrenic Copolymers for Improving Heat Resistance of Poly(methyl methacrylate)
  10. Study of Dispersive and Distributive Mixing in a Converging Pipe
  11. Investigation of Surface Roughness and MRR for Engineering Polymers with the Abrasive Water Jet Turning Process
  12. Recycling the Cork Powder in a PVC-Based Composite Material: Combined Effect on Physico-Mechanical and Thermal Properties
  13. Influences on the Magnetic Properties of Injection Molded Multipolar Rings
  14. PMMA Micro-Pillar Forming in Micro Channel by Hot Embossing
  15. Experimental Investigation and Modeling of a New High Speed Coating Process
  16. Statistical Approach to Analyze the Warpage, Shrinkage and Mechanical Strength of Injection Molded Parts
  17. Optical Properties of HDPE in Injection Molding and Injection Press Molding for IR System Lenses
  18. PPS News
  19. PPS News
  20. Seikei Kakou Abstracts
  21. Seikei-Kakou Abstracts
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 9.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.3180/html
Button zum nach oben scrollen