Seikei-Kakou Abstracts

Articles in the same Issue

1. Contents
2. Contents
3. Regular Contributed Articles
4. Estimation of Bulk Melt-Temperature from In-Mold Thermal Sensors for Injection Molding, Part B: Validation
5. Online Measurement of Electrospinning Jet Velocity of Polyvinyl Alcohol
6. Rheological Characterization and Thermal Stability of Different Intrinsic Viscosity Poly(ethylene terephthalate) in Air and Nitrogen
7. Ethylene Methyl Acrylate Copolymer Toughened Poly(lactic acid) Blends: Phase Morphologies, Mechanical and Rheological Properties
8. Comparative Effects of mEOC on the Structures and Properties of PP/SGF and PP/EOC/SGF Composite Foams
9. Development of Styrenic Copolymers for Improving Heat Resistance of Poly(methyl methacrylate)
10. Study of Dispersive and Distributive Mixing in a Converging Pipe
11. Investigation of Surface Roughness and MRR for Engineering Polymers with the Abrasive Water Jet Turning Process
12. Recycling the Cork Powder in a PVC-Based Composite Material: Combined Effect on Physico-Mechanical and Thermal Properties
13. Influences on the Magnetic Properties of Injection Molded Multipolar Rings
14. PMMA Micro-Pillar Forming in Micro Channel by Hot Embossing
15. Experimental Investigation and Modeling of a New High Speed Coating Process
16. Statistical Approach to Analyze the Warpage, Shrinkage and Mechanical Strength of Injection Molded Parts
17. Optical Properties of HDPE in Injection Molding and Injection Press Molding for IR System Lenses
18. PPS News
19. PPS News
20. Seikei Kakou Abstracts
21. Seikei-Kakou Abstracts