Comparative Effects of mEOC on the Structures and Properties of PP/SGF and PP/EOC/SGF Composite Foams

References

Alonso, M. V., Auad, M. L. and Nutt, S., “Short-Fiber-Reinforced Epoxy Foams”, Composites Part A, 37, 1952–1960 (2006) 10.1016/j.compositesa.2005.12.011Suche in Google Scholar

Antunes, M., Mudarra, M. and Velasco, J. I., “Broad-Band Electrical Conductivity of Carbon Nanofibre-Reinforced Polypropylene Foams”, Carbon, 49, 708–717 (2011) 10.1016/j.carbon.2010.10.032Suche in Google Scholar

Antunes, M. C, Moraes, D. V. O., Magnabosco, R., Bonse, B.C. and Bettini, S. H. P., “Fatigue Life of Coir Fiber Reinforced PP Composites: Effect of Compatibilizer and Coir Fiber Contents”, Polym. Eng. Sci., 53, 2159–2165 (2013) 10.1002/pen.23483Suche in Google Scholar

Begin, M., Rodrigue, D., “Effect of Weld Lines on Injection Moulded Fibre Glass Reinforced Structural Foams. 2-Impact and Flexural Properties”, Cell. Polym., 29, 95–112 (2010)10.1177/026248931002900202Suche in Google Scholar

Benhadou, M., Haddout, A. and Villoutreix, G., “Injection of Polypropylene Reinforced with Short Glass Fibers: Rheological Behavior”, J. Reinf. Plast. Compos., 26, 1357–1366 (2007) 10.1177/0731684407079735Suche in Google Scholar

Bikiaris, D., Matzinos, P., Larena, A., Flaris, V. and Panayiotou, C., “Use of Silane Agents and Poly(propylene-g-maleic anhydride) Copolymer as Adhesion Promoters in Glass Fiber/Polypropylene Composites”, J. Appl. Polym. Sci., 81, 701–709 (2001) 10.1002/app.1487Suche in Google Scholar

Bledzki, A. K., Faruk, O., “Effects of the Chemical Foaming Agents, Injection Parameters, and Melt-Flow Index on the Microstructure and Mechanical Properties of Microcellular Injection-Molded Wood-Fiber/Polypropylene Composites”, J. Appl. Polym. Sci., 97, 1090–1096 (2005) 10.1002/app.21685Suche in Google Scholar

Bledzki, A. K., Faruk, O., Influence of Different Endothermic Foaming Agents on Microcellular Injection Moulded Wood Fibre Reinforced PP Composites”, Cell. Polym., 25, 143–158 (2006a)10.1177/026248930602500302Suche in Google Scholar

Bledzki, A. K., Faruk, O., “Injection Moulded Microcellular Wood Fibre-Polypropylene Composites”, Composites Part A, 37, 1358–1367 (2006b) 10.1016/j.compositesa.2005.08.010Suche in Google Scholar

Chen, Z. X., Wen, D. J. and Li, G. Z., “Micro-Structure and Reinforced Mechanism of the Polyurethane Foam-Plastic Reinforced by Glass Fibers (in Chinese)”, Polym. Mater. Sci. Eng., 15, 102–104 (1999)Suche in Google Scholar

Da Silva, A. L. N., Rocha, M. C. G., Coutinho, F. M. B., Bretas, R. E. S. and Farah, M., “Evaluation of Rheological and Mechanical Behavior of Blends Based on Polypropylene and Metallocene Elastomers”, Polym. Test., 21, 647–652 (2002) 10.1016/S0142-9418(01)00137-4Suche in Google Scholar

Desai, A., Auad, M. L., Shen, H. and Nutt, S.R., “Mechanical Behavior of Hybrid Composite Phenolic Foam”, J. Cell. Plast., 44, 15–36 (2008)10.1177/0021955X07078021Suche in Google Scholar

Férec, J., Heuzey, M. C., Pérez-González, J., De Vargas, L., Ausias, G. and Carreau, P. J., “Investigation of the Rheological Properties of Short Glass Fiber-Filled Polypropylene in Extensional Flow”, Rheol. Acta., 48, 59–72 (2009) 10.1007/s00397-008-0309-9Suche in Google Scholar

Güllü, A., Özdemir, A. and Özdemir, E., “Experimental Investigation of the Effect of Glass Fibres on the Mechanical Properties of Polypropylene (PP) and Polyamide 6 (PA6) Plastics”, Mater. Des., 27, 316–323 (2006) 10.1016/j.matdes.2004.10.013Suche in Google Scholar

Guo, G., Lee, Y. H., Rizvi, G. M. and Park, C. B., “Influence of Wood Fiber Size on Extrusion Foaming of Wood Fiber/HDPE Composites”, J. Appl. Polym. Sci., 107, 3505–3511 (2008) 10.1002/app.27467Suche in Google Scholar

He, C. X., Costeux, S., Wood-Adams, P. and Dealy, J. M., “Molecular Structure of High Melt Strength Polypropylene and its Application to Polymer Design”, Polymer, 44, 7181–7188 (2003) 10.1016/j.polymer.2003.09.009Suche in Google Scholar

Hopmann, C., Michaeli, W. and Puch, F., “Experimental Investigation on the Influence of the Composition on the Morphology and the Mechanical Properties of Short Glass Fiber-Reinforced Polypropylene Nanocomposites”, Polym. Compos., 33, 2228–2235 (2012) 10.1002/pc.22367Suche in Google Scholar

Huang, Z. Y., Chen, Y. H., Tang, J. H. and Li, Z. M., “Hierarchic Structure and Mechanical Property of Short Glass Fiber/Isotactic Polypropylene Composites Containing B-Nucleation Agent”, Polym. Plast. Technol. Eng., 52, 80–89 (2013) 10.1080/03602559.2012.721441Suche in Google Scholar

Jang, B. Z., Uhlmann, D. R. and Van der Sande, J. B., “Rubber-Toughening in Polypropylene”, J. Appl. Polym. Sci., 30, 2485–2504 (1985) 10.1002/app.1985.070300617Suche in Google Scholar

Khalid, M., Salmiaton, A., Chuah, T. G., Ratnam, C. T. and Choong, S. Y. Thomas, “Effect of MAPP and TMPTA as Compatibilizer on the Mechanical Properties of Cellulose and Oil Palm Fiber Empty Fruit Bunch-Polypropylene Biocomposites”, Compos. Interfaces, 15, 251–262 (2008) 10.1163/156855408783810876Suche in Google Scholar

Klempner, D., Frisch, K. C.: Handbook of Polymeric Foams and Foam Technology. Hanser Publishers, New York, p. 12–15 (1991)Suche in Google Scholar

Kuboki, T., “Foaming Behavior of Cellulose Fiber-Reinforced Polypropylene Composites in Extrusion”, J. Cell. Plast., 50, 113–128 (2014a) 10.1177/0021955X13504775Suche in Google Scholar

Kuboki, T., “Mechanical Properties and Foaming Behavior of Injection Molded Cellulose Fiber Reinforced Polypropylene Composite Foams”, J. Cell. Plast., 50, 129–143 (2014b) 10.1177/0021955X13504775Suche in Google Scholar

Li, G. Z., Yu, Y. Z., “Approach of Reinforced Mechanism of the Glass Fibers on the PUR Foam Plastics (in Chinese)”, Polym. Mater. Sci. Eng., 13, 130–133 (1997)Suche in Google Scholar

Li, Q. X., Matuana, L. M., “Foam Extrusion of High Density Polyethylene/Wood-Flour Composites Using Chemical Foaming Agents”, J. Appl. Polym. Sci., 88, 3139–3150 (2003) 10.1002/app.12003Suche in Google Scholar

Ma, C. G., Zhang, M. Q. and Rong, M. Z., “Morphology Prediction of Ternary Polypropylene Composites Containing Elastomer and Calcium Carbonate Nanoparticles Filler”, J. Appl. Polym. Sci., 103, 1578–1584 (2007) 10.1002/app.25431Suche in Google Scholar

Matuana, L. M., Park, C. B. and Balatinecz, J. J., “Cell Morphology and Property Relationships of Microcellular Foamed PVC/Wood-Fiber Composites”, Polym. Eng. Sci., 38, 1862–1872 (1998) 10.1002/pen.10356Suche in Google Scholar

Naguib, H. E., Park, C. B., Panzer, U. and Reichelt, N., “Strategies for Achieving Ultra Low-Density Polypropylene Foams”, Polym. Eng. Sci., 42, 1481–1492 (2002) 10.1002/pen.11045Suche in Google Scholar

Okamoto, M., Nam, P. H., Maiti, P., Kotaka, T., Nakayama, T., Takada, M., Ohshima, M., Usuki, A., Hasegawa, N. and Okamoto, H., “Biaxial Flow-Induced Alignment of Silicate Layers in Polypropylene/Clay Nanocomposite Foam”, Nano Lett., 1, 503–505 (2001) 10.1021/nl010051Suche in Google Scholar

Owens, D. K., Wendt, R. C., “Estimation of the Surface Free Energy of Polymers”, J. Appl. Polym. Sci., 13, 1741–1747 (1969) 10.1002/app.1969.070130815Suche in Google Scholar

Paul, S., Kale, D. D., “Impact Modification of Polypropylene Copolymer with a Polyolefinic Elastomer”, J. Appl. Polym. Sci., 76, 1480–1484 (2000) 10.1002/(SICI)1097-4628(20000531)76:9<1480::AID-APP12>3.0.CO;2-KSuche in Google Scholar

Pegoretti, A., Riccò, T., “Fatigue Crack Propagation in Polypropylene Reinforced with Short Glass Fibres”, Compos. Sci. Technol.59, 1055–1062 (1999) 10.1016/S0266-3538(98)00143-2Suche in Google Scholar

Premphet, K., Horanont, P., “Phase Structure of Ternary Polypropylene/Elastomer/Filler Composites: Effect of Elastomer Polarity”, Polymer, 41, 9283–9290 (2000a) 10.1016/S0032-3861(00)00303-7Suche in Google Scholar

Premphet, K., Horanont, P., “Phase Structure and Property Relationships in Ternary Polypropylene/Elastomer/Filler Composites: Effect of Elastomer Polarity”, J. Appl. Polym. Sci., 76, 1929–1939 (2000b) 10.1002/(SICI)1097-4628(20000624)76:13<1929::AID-APP10>3.0.CO;2-HSuche in Google Scholar

Premphet-Sirisinha, K., Preechachon, I., “Changes in Morphology and Properties by Grafting Reaction in PP/EOR/CaCo₃ Ternary Composites”, J. Appl. Polym. Sci., 89, 3557–3562 (2003) 10.1002/app.12544Suche in Google Scholar

Rätzsch, M., Bucka, H., Hesse, A., Reichelt, N. and BorsigE.. “Challenges in Polypropylene by Chemical Modification”, Macromol. Symp., 129, 53–77 (1998) 10.1002/masy.19981290106Suche in Google Scholar

Rodrigue, D., Souici, S. and Twite-Kabamba, E., “Effect of Wood Powder on Polymer Foam Nucleation”, J. Vinyl. Add. Tech., 12, 19–24 (2006) 10.1002/vnl.20062Suche in Google Scholar

Romero-Guzmán, M. E., Romo-Uribe, A., González, A. E. and Cruz-Silva, R., “Melt Rheology of Polypropylene Reinforced with Polyaniline-Coated Short Glass Fibers”, J. Appl. Polym. Sci., 109, 2207–2218 (2008) 10.1002/app.28333Suche in Google Scholar

Shen, H. B., Nutt, S., “Mechanical Characterization of Short Fiber Reinforced Phenolic Foam”, Composites Part A, 34, 899–906 (2003) 10.1016/S1359-835X(03)00136-2Suche in Google Scholar

Shen, J., Han, X. M. and Lee, L. J., “Nanoscaled Reinforcement of Polystyrene Foams Using Carbon Nanofibers”, J. Cell. Plast., 42, 105–126 (2006) 10.1177/0021955X06060947Suche in Google Scholar

Shen, J., Zeng, C. C. and Lee, L. J., “Synthesis of Polystyrene-Carbon Nanofibers Nanocomposite Foams”, Polymer, 46, 5218–5224 (2005) 10.1016/j.polymer.2005.04.010Suche in Google Scholar

Sikló, B., Cameron, K. and Kovács, J. G., “Deformation Analysis of Short Glass Fiber-Reinforced Polypropylene Injection-Molded Plastic Parts”, J. Reinf. Plast. Compos., 30, 1367–1372 (2011) 10.1177/0731684411426203Suche in Google Scholar

Soleimani, M., Tabil, L., Panigrahi, S. and Opoku, A., “The Effect of Fiber Pretreatment and Compatibilizer on Mechanical and Physical Properties of Flax Fiber-Polypropylene Composites”, J. Polym. Environ.16, 74–82 (2008) 10.1007/s10924-008-0102-ySuche in Google Scholar

Song, N., Zhu, L., Yan, X. L., XuY. B. and Xu, X. H., “Effect of Blend Composition on the Rheology Property of Polypropylene/Poly(ethylene-1-octene) Blends”, J. Mater. Sci., 43, 3218–3222 (2008) 10.1007/s10853-008-2554-9Suche in Google Scholar

Thakur, M. K., Thakur, V. K., Gupta, R. K. and Pappu, A., “Synthesis and Applications of Biodegradable Soy Based Graft Copolymers: A Review”, ACS Sustainable Chem. Eng., 4, 1–17 (2016) 10.1021/Acssuschemeng.5b01327Suche in Google Scholar

Thakur, V. K., Kessler, M. R., “Self-Healing Polymer Nanocomposite Materials: A Review”, Polymer, 69, 369–383 (2015) 10.1016/j.polymer.2015.04.086Suche in Google Scholar

Thakur, V. K., Tan, E. J., Lin, M. F. and Lee, P. S., “Poly(vinylidene fluoride)-Graft-Poly(2-hydroxyethyl methacrylate): A Novel Material for High Energy Density Capacitors”, J. Mater. Chem., 21, 3751–3759 (2011a) 10.1039/c0jm02408bSuche in Google Scholar

Thakur, V. K., Tan, E. J., Lin, M. F. and Lee, P. S., “Polystyrene Grafted Polyvinylidenefluoride Copolymers with High Capacitive Performance”, Polym. Chem., 2, 2000–2009 (2011b) 10.1039/c1py00225bSuche in Google Scholar

Thakur, V. K., Thakur, M. K., “Recent Advances in Graft Copolymerization and Applications of Chitosan: A Review”, ACS Sustainable Chem. Eng., 2, 2637–2652 (20014)10.1021/sc500634pSuche in Google Scholar

Thakur, V. K., Vennerberg, D. and Kessler, M. R., “Green Aqueous Surface Modification of Polypropylene for Novel Polymer Nanocomposites”, ACS Appl. Mater. Interfaces, 6, 9349–9356 (2014) 10.1021/am501726dSuche in Google Scholar PubMed

Thakur, V. K., Yan, J., Lin, M. F., Zhi, C., Golberg, D., Bando, Y., Sim, R. and Lee, P. S., “Novel Polymer Nanocomposites from Bioinspired Green Aqueous Functionalization of BNNTs”, Polym. Chem., 3, 962–969 (2012) 10.1039/c2py00612jSuche in Google Scholar

Thompson, M. R., Qin, X., Zhang, G. and Hrymak, A. N., “Aspects of Foaming a Glass-Reinforced Polypropylene with Chemical Blowing Agents”, J. Appl. Polym. Sci., 102, 4696–4706 (2006) 10.1002/app.24770Suche in Google Scholar

Vas, L. M., Bakonyi, P., “Creep Failure Strain Estimation of Glass Fibre/Polypropylene Composites Based on Short-Term Tests and Weibull Characterization”, J. Reinf. Plast. Compos.32, 34–41 (2013) 10.1177/0731684412453513Suche in Google Scholar

Wang, C. B., Ying, S. J., “Batch Foaming of Short Carbon Fiber Reinforced Polypropylene Composites”, Fibers Polym., 14, 815–821 (2013) 10.1007/s12221-013-0815-ySuche in Google Scholar

Wen, D. J., Chen, Z. X. and Li, G. Z., “Stretching and Compressing Destructive Mechanism of the Polyurethane Foam-Plastics Reinforced by Glass Fibers (in Chinese)”, Acta Mater. Compos. Sin., 16, 64–67 (1999)Suche in Google Scholar

Wong, S., Naguib, H. E. and Park, C. B., “Effect of Processing Parameters on the Cellular Morphology and Mechanical Properties of Thermoplastic Polyolefin (TPO) Microcellular Foams”, Adv. Polym. Tech., 26, 232–246 (2007) 10.1002/adv.20104Suche in Google Scholar

Wu, S.: Polymer Interface and Adhesion, CRC Press, New York, p.89 (1982)Suche in Google Scholar

Xi, Z., Sha, X., Liu, T. and Zhao, L., “Microcellular Injection Molding of Polypropylene and Glass Fiber Composites with Supercritical Nitrogen”, J. Cell. Plast., 50, 489–505 (2014) 10.1177/0021955X14528931Suche in Google Scholar

Xu, Z. W., Jiang, X. L., Liu, T., Hu, G. H., Zhao, L., Zhu, Z. N. and Yuan, W. K., “Foaming of Polypropylene with Supercritical Carbon Dioxide”, J. Supercrit. Fluids, 41, 299–310 (2007) 10.1016/j.supflu.2006.09.007Suche in Google Scholar

Yang, B., Leng, J. H., He, B. B., Liu, H., Zhang, Y. and Duan, Z. H., “Influence of Fiber Length and Compatibilizer on Mechanical Properties of Long Glass Fiber Reinforced Polyamide 6,6”, J. Reinf. Plast. Compos.31, 1103–1112 (2012) 10.1177/0731684412454199Suche in Google Scholar

Yang, J. H, Zhang, Y. and Zhang, Y. X., “Brittle-Ductile Transition of PP/POE Blends in Both Impact and High Speed Tensile Tests”, Polymer, 44, 5047–5052 (2003) 10.1016/S0032-3861(03)00438-5Suche in Google Scholar

Yang, J. N., Li, Z. Q., Hu, X. Y. and Li, S. Y., “Mechanical Performance of Secondary-Foamed Polypropylene Toughened by Ethylene-1-Octene Copolymer (in Chinese)”, Polym. Mater. Sci. Eng., 24, 95–98 (2008)Suche in Google Scholar

Yang, J. N., Li, Z. Q., Wang, L. Y., Liu, X. B. and Liu, J. S., “Foamed Results and Mechanical Properties of SGF/PP Foam Composites (in Chinese)”, J. Nanjing Univ. Aeronaut. Astronaut., 42, 88–92 (2010)Suche in Google Scholar

Yu, J. Y., Zhou, Z. F., Zhao, Q. N. and Cheng, J. F., “A Study of Interface Reaction between Amino Silane and Maleic Anhydride Grafted Polypropylene (in Chinese)”, Chin. J. Chem. Phys., 13, 109–112 (2000)Suche in Google Scholar

Zhai, Z., Liu, Z., Feng, L. and Liu, S., “Interfacial Adhesion of Glass Fibre Reinforced Polypropylene-Maleic Anhydride Modified Polypropylene Copolymer Composites”, J. Reinf. Plast. Compos., 33, 785–793 (2014) 10.1177/0731684413519006Suche in Google Scholar

Zhang, G., Thompson, M. R., “Reduced Fibre Breakage in a Glass-Fibre Reinforced Thermoplastic through Foaming”, Compos. Sci. Technol., 65, 2240–2249 (2005) 10.1016/j.compscitech.2005.04.050Suche in Google Scholar

Zhang, S. W., Rodrigue, D. and Riedl, B., “Preparation and Morphology of Polypropylene/Wood Flour Composite Foams via Extrusion”, Polym. Compos., 26, 731–738 (2005) 10.1002/pc.20143Suche in Google Scholar

Zhang, X. J., Yang, H. J., Lin, Z. D. and Tan, S. Z., “Polypropylene Hybrid Composites Filled by Wood Flour and Short Glass Fiber: Effect of Compatibilizer on Structure and Properties”, J. Thermoplast. Compos. Mater., 26, 16–29 (2011) 10.1177/0892705711417030Suche in Google Scholar

Zhang, Z. X., Chen, D. L., Kwak, K., Xin, Z. X. and Kim, J. K., “Effects of Compatibilizers on the Physico-Mechanical and Foaming Properties of Polyproylene/Wood-Fiber Composites”, J. Vinyl. Add. Tech., 19, 250–257 (2013) 10.1002/vnl.21318Suche in Google Scholar

Zheng, A. N., Wang, H. G., Zhu, X. S. and Masuda, S., “Studies on the interface of Glass Fiber-Reinforced Polypropylene Composite”, Compos. Interfaces, 9, 319–333 (2002) 10.1163/156855402760194683Suche in Google Scholar