Electrofusion Welding Process Optimization Using a Coupled Numerical and Experimental Approach

References

Bowman, J., “A Review of the Electrofusion Joining Process for Polyethylene Pipe Systems”, Polym. Eng. Sci., 37, 674–691 (1997) 10.1002/pen.11712Suche in Google Scholar

Chebbo, Z., Vincent, M., Boujlal, A., Gueugnaut, D. and Tillier, Y., “Numerical and Experimental Study of the Electrofusion Welding Process of Polyethylene Pipes”, Polym. Eng. Sci., 55, 123–131 (2015) 10.1002/pen.23878Suche in Google Scholar

Cheron, J. J., Chevrand, J., “Knowledge of Mechanisms Taking Place during Electrofusion of Polyethylene”, International Gas Research Conference, Toronto, Ontario, Canada (1987)Suche in Google Scholar

Dufour, D., Meister, E., “Polyethylene Electrofusion Technique: Prediction Model of Welding Quality”, International Gas Research Conference, Tokyo, Japan, p. 232–242 (1989)Suche in Google Scholar

Federspiel, E., Gueugnaut, D. and Saint-Royre, D., “Comparaison d’Essais de Soudage sur Eprouvettes Pied d’Éléphant Interprétés au Moyen de la Théorie de la Diffusion des Macromolécules (Report)”, GDF-CERSTA (1987)Suche in Google Scholar

Fujikake, M., Fukumura, M. and Kitao, K., “Analysis of the Electrofusion Joining Process in Polyethylene Gas Piping Systems”, Comput. Struct., 64, 939–948 (1997) 10.1016/S0045-7949(97)00008-4Suche in Google Scholar

Gent, A. N., Schultz, J., “Effect of Wetting Liquids on the Strength of Adhesion of Viscoelastic Material”, J. Adhes., 3, 281–294 (1972) 10.1080/00218467208072199Suche in Google Scholar

Hehn, O., “Analyse Expérimentale et Simulation Thermomécanique du Soudage Bout a Bout de Tubes de Polyéthylène”, Thèse Ecole des Mines de Paris, Sophia Antipolis, France (2006)Suche in Google Scholar

Jud, K., Kausch, H. H., “Load Transfer through Chain Molecules after Interpenetration at Interfaces”, Polym. Bull., 1, 697–707 (1979)Suche in Google Scholar

Kanninen, M. F., Buczala, G. S., Kuhlman, C. J., Green, S. T., Grogory, S. C., O’Donoghue, P. E. and Mccarthy, M. A., “A Theoretical and Experimental Evaluation of the Long Term Integrity of an Electrofusion Joint”, Plastics Pipes VIII Conference, Koningshof, The Netherlands, p. B2/3.1–10 (1992)Suche in Google Scholar

Lavielle, L., Schultz, J., “L'adhésion Polymère-Métal”, Matériaux et Techniques, 6–7, 215–222 (1984)10.1051/mattech/198472060215Suche in Google Scholar

Nakashiba, A., Nishimura, H., Inoue, F., Nakagawa, T., Homma, K. and Nakazato, H., “Fusion Simulation of Electrofusion Polyethylene Joints for Gas Distribution”, Polym. Eng. Sci., 33, 1146–1151 (1993) 10.1002/pen.760331708Suche in Google Scholar

Nishimura, H., Inoue, F., Nakashiba, A. and Ishikawa, T., “Design of Electrofusion Joints and Evaluation of Fusion Strength Using Fusion Simulation Technology”, Polym. Eng. Sci., 34, 1529–1534 (1994) 10.1002/pen.760342003Suche in Google Scholar

Nishimura, H., Nakakura, M., Shishido, S., Masaki, A., Shibano, H. and Nagatani, F., “Effect of Design Factors of EF Joints on Fusion Strength”, 20th Plastic Gas Pipe Symposium, American Gas Association, Arlington, p.99 (1989)Suche in Google Scholar

O'Donoghue, P. E., Kanninen, M. F., Green, S. T. and Grigoty, S. C., “Results of a Thermomechanical Analysys Model for Electrofusion Joining of PE Gas Pipes”, 12th Plastic Fuel Gas Pipe Symposium, Boston, USA, p. 341–342 (1991)Suche in Google Scholar

Pitman, G. L., “Electrofusion Welding Prediction and Computer-Aided Design of Fittings”, Plastics Pipes VI Conference, University of York, UK, p. 1–7 (1985)Suche in Google Scholar

Rosala, G. F., Day, A. J. and Wood, A. S., “A Finite Element Model of the Electrofusion Welding of Thermoplastic Pipes”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 211, 137–146 (1997) 10.1243/0954408971529629Suche in Google Scholar

Saint-Royre, D., Gueugnaut, D. and Reveret, D., “Test Methodology for the Determination of Optimum Fusion Welding Conditions of Polyethylene”, J. Appl. Polym. Sci., 38, 147–162 (1989) 10.1002/app.1989.070380114Suche in Google Scholar

Wool, R. P., “A Theory of Crack Healing in Polymers”, J. Appl. Phys., 52, 5953–5963 (1981) 10.1063/1.328526Suche in Google Scholar