The Development of a Multi-Axis Magnetic Roller for Micro-Structure Transfer Embossing Processing Technology
-
Y.-J. Weng
Abstract
This study proposed a processing technology using a multi-axis magnetic roller for micro-structure transfer embossing development. First, dynamics deduction and ANSYS numerical simulation were used to explore the impact of the upper axis on the medium and lower axis, under the conditions of different parameters. This study also-developed and established a multi-axis magnetic roller micro-structure transfer embossing system for analysis, simulation, and discussion, on the technological characteristics of the multi-axis auxiliary roller embossing replication and transfer embossing processing technology. By taking advantage of the feature of the uniform contact pressing of the magnetic roller during the roller embossing process, coupled with the coordinated force application of the three axis rollers, this study attempted to achieve complete, uniform transfer embossing and replication of the micro-structure during the roller embossing process. The results of multi-axis transfer embossing process simulation and experimental analysis showed that multi-axis transfer embossing technology can transfer and replicate a micro-structure on the roller in a more uniform and more effective manner. The proposed multi-axis magnetic roller micro-structure transfer embossing system can smoothly replicate a micro-structure by roller embossing with good replication moldability and optical performance characteristics, in order to sufficiently achieve uniform embossing results
References
Aslanov, E. R., Doskolovich, L. L., Moiseev, M. A., Bezus, E. A. and Kazanskiy, N. L., “Design of an Optical Element Forming an Axial Line Segment for Efficient LED Lighting Systems”, Opt. Express, 21, 28651–28656 (2013) 10.1364/OE.21.028651Suche in Google Scholar PubMed
Barborini, E., Corbelli, G., Bertolini, G., Repetto, P., Leccardi, M., Vinati, S. and Milani, P., “The Influence of Nanoscale Morphology on the Resistivity of Cluster-Assembled Nanostructured Metallic Thin Films”, New J. Phys., 12, 073001–12 (2010) 10.1088/1367-2630/12/7/073001Suche in Google Scholar
Chung, S. R., Park, S., Abdel-Rahman, E. M.Yeow, J. T. W. and Khater, M., “Architecture for MEMS-Based Analogue Demodula”, J. Micromech. Microeng., 23, 045013, 1–13 (2013)10.1088/0960-1317/23/4/045013Suche in Google Scholar
Erwin, J. W. B., Henri, V. J. and Niels, R. T., “Fabrication of 3D Fractal Structures Using Nanoscale Anisotropic Etching of Single Crystalline Silicon”, J. Micromech. Microeng., 23, 055024, 1–10 (2013)10.1088/0960-1317/23/5/055024Suche in Google Scholar
Kanamori, Y., Okochi, M. and Hane, K., “Fabrication of Antireflection Subwavelength Gratings at the Tips of Optical Fibers Using UV Nanoimprint Lithography”, Opt. Express, 21322–328 (2013) 10.1364/OE.21.000322Suche in Google Scholar PubMed
Liu, X., Goldberg, D. and Menon, V. M., “Formation of Microcavity Polaritons in ZnO Nanoparticles”, Opt. Express, 21, 20620–20625 (2013) 10.1364/OE.21.000204Suche in Google Scholar PubMed
Malyarchuk, V., Hua, F., Mack, N. H., Velasquez, V. T., White, J. O., Nuzzo, R. G. and Rogers, J. A., “High Performance Plasmonic Crystal Sensor Formed by Soft Nanoimprint Lithography”, Opt. Express, 13, 5669–5675 (2005) 10.1364/OPEX.13.005669Suche in Google Scholar PubMed
Smith, C. L. C., Desiatov, B., Goykmann, I., Fernandez-Cuesta, I., Levy, U. and Kristensen, A., “Plasmonic V-Groove Waveguides with Bragg Grating Filters via Nanoimprint Lithography”, Opt. Express, 20, 5696–5706 (2012) .10.1364/OE.20.005696Suche in Google Scholar
Tolstosheeva, E., Barborini, E., Meyer, E. M., Shafi, M., Vinati, S. and Lang, W., “Micropatterning of Nanoparticle Films by Bilayer Lift-Off”, J. Micromech. Microeng., 24, 015001, 1–8 (2014)10.1088/0960-1317/24/1/015001Suche in Google Scholar
Weng, Y. J., “A Study on the Forming Simulation and Formability of Three Dimensional Bevel Embossing of Columnar Array Microstructures”, Microelectron. Eng., 113, 20–28 (2014) 10.1016/j.mee.2013.06.013Suche in Google Scholar
Weng, Y. J., “The Integrated Curved Surface Imprinting Process Technology Aided by Gas and Gray-Scale Regulated Electromagnetic Force”, J. Polym. Eng., 32, 23–29 (2012) 10.1515/polyeng.2011.603Suche in Google Scholar
Weng, Y. J., Yang, S. Y., Weng, Y. C. and Wang, L.A., “Fabrication of Buried Waveguide Microstructure Using Gas-Assisted Micro/Nanoimptinting with Soft Mold”, Polym. Adv. Technol., 18, 993–998 (2007) 10.1002/pat.921Suche in Google Scholar
© 2015, Carl Hanser Verlag, Munich
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Analysis of Residual Stresses in Blow Molded Polyethylene Terephthalate Bottles Using Creep Model
- Crystallization Behavior and Mechanical Properties of Nanosilica-Reinforced Isotactic Polypropylene Composites
- The Development of a Multi-Axis Magnetic Roller for Micro-Structure Transfer Embossing Processing Technology
- Simplified Modeling of Convection and Radiation Heat Transfer during Infrared Heating of PET Sheets and Preforms
- Electrofusion Welding Process Optimization Using a Coupled Numerical and Experimental Approach
- Synthesis and Evaluation of Amides as Slip Additives in Polypropylene
- Hole Fraction Dependence on Linear Viscosity of PS, PP and ABS
- Toughening of Polylactide by Bio-Based and Petroleum-Based Thermoplastic Elastomers
- Paste Extrusion and Mechanical Properties of PTFE
- PPS News
- PPS News
Artikel in diesem Heft
- Contents
- Contents
- Regular Contributed Articles
- Analysis of Residual Stresses in Blow Molded Polyethylene Terephthalate Bottles Using Creep Model
- Crystallization Behavior and Mechanical Properties of Nanosilica-Reinforced Isotactic Polypropylene Composites
- The Development of a Multi-Axis Magnetic Roller for Micro-Structure Transfer Embossing Processing Technology
- Simplified Modeling of Convection and Radiation Heat Transfer during Infrared Heating of PET Sheets and Preforms
- Electrofusion Welding Process Optimization Using a Coupled Numerical and Experimental Approach
- Synthesis and Evaluation of Amides as Slip Additives in Polypropylene
- Hole Fraction Dependence on Linear Viscosity of PS, PP and ABS
- Toughening of Polylactide by Bio-Based and Petroleum-Based Thermoplastic Elastomers
- Paste Extrusion and Mechanical Properties of PTFE
- PPS News
- PPS News
