Thermoplastic Cellulose Stearate and Cellulose Laurate: Melt Rheology, Processing and Application Potential

References

BrandrupJ., ImmergutE. H., GrulkeE. A., AbeA. and BlochD. R.: Polymer Handbook, 4^th Edition, John Wiley and Sons, New York (1999)Suche in Google Scholar

BarthelS., HeinzeT., “Acylation and Carbanilation of Cellulose in Ionic Liquids”, Green Chem., 8, 301–306 (2006) 10.1039/B513157JSuche in Google Scholar

CaoY., LiH. and ZhangJ., “Homogeneous Synthesis and Characterization of Cellulose Acetate Butyrate (CAB) in 1-Allyl-3-Methylimidazolium Chloride (AmimCl) Ionic Liquid”, Ind. Eng. Chem. Res., 50, 7808–7814 (2011) 10.1021/ie2004362Suche in Google Scholar

ChauvelonG., GergaudN., SaulnierL., LourdinD., BuleonA., ThibaultJ. F. and KrauszP., “Esterification of Cellulose-Enriched Agricultural By-Products and Characterization of Mechanical Properties of Cellulosic Films”, Carbohydr. Polym., 42, 385–392 (2000) 10.1016/S0144-8617(99)00187-3Suche in Google Scholar

ColbyR. H., FettersL. J. and GraessleyW. W., “The Melt Viscosity-Molecular Weight Relationship for Linear Polymers”, Macromolecules, 20, 2226–2237 (1987) 10.1021/ma00175a030Suche in Google Scholar

CrépyL., MiriV., JolyN., MartinP. and LefebvreJ.-M., “Effect of Side Chain Length on Structure and Thermomechanical Properties of Fully Substituted Cellulose Fatty Esters”, Carbohydr. Polym., 83, 1812–1820 (2011) 10.1016/j.carbpol.2010.10.045Suche in Google Scholar

EdgarK. J., BuchananC. M., DebenhamJ. S., RundquistP. A., SeilerB. D., SheltonM. C. and TindallD., “Advances in Cellulose Ester Performance and Application”, Prog. Polym. Sci., 26, 1605–1688 (2001) 10.1016/S0079-6700(01)00027-2Suche in Google Scholar

FerryJ. D.: Viscoelastic Properties of Polymers, 3^rd Edition, John Wiley and Sons, New York (1980)Suche in Google Scholar

GremosS., ZarafetaD., KekosD. and KolisisF., “Direct Enzymatic Acylation of Cellulose Pretreated in Bmimcl Ionic Liquid”, Bioresour. Technol., 102, 1378–1382 (2011)10.1016/j.biortech.2010.09.021Suche in Google Scholar

HeinzeT., LiebertT., “Unconventional Methods in Cellulose Functionalization”, Prog. Polym. Sci., 26, 1689–1762 (2001)10.1016/S0079-6700(01)00022-3Suche in Google Scholar

HeinzeT., SchwikalK. and BarthelS., “Ionic Liquids as Reaction Medium in Cellulose Functionalization”, Macromol. Biosci., 5, 520–525 (2005) 10.1002/mabi.200500039Suche in Google Scholar PubMed

HeinzeT., DornS., SchöbitzM., LiebertT., KöhlerS. and MeisterF., “Interactions of Ionic Liquids with Polysaccharides – 2: Cellulose”, Macromol. Symp., 262, 8–22 (2008) 10.1002/masy.200850202Suche in Google Scholar

HuangF.-Y., “Thermal Properties and Thermal Degradation of Cellulose Tri-Stearate (CTs)”, Polymers, 4, 1012–1024 (2012) 10.3390/polym4021012Suche in Google Scholar

HuangK., XiaJ., LiM., LianL., YangX. and LinG., “Homogeneous Synthesis of Cellulose Stearates with Different Degrees of Substitution in Ionic Liquid 1-Butyl-3-Methylimidazolium Chloride”, Carbohydr. Polym., 83, 1631–1635 (2011) 10.1016/j.carbpol.2010.10.020Suche in Google Scholar

JolyN., GranetR., BranlandP., VerneuilB. and KrauszP., “New Methods for Acylation of Pure and Sawdust-Extracted Cellulose by Fatty Acid Derivatives – Thermal and Mechanical Analyses of Cellulose-Based Plastic Films”, J. Appl. Polym. Sci., 97, 1266–1278 (2005) 10.1002/app.21783Suche in Google Scholar

KennedyJ. F., PhillipsG. O. and WilliamsP. A.: Cellulose Sources and Exploitation, Aspects of Cellulose Structure, Ellis Horwood, New York, p. 3–12 (1990)Suche in Google Scholar

KrasnouI., TarassovaE. and KrummeA., “Rheology of Thermoplastic Cellulose-Esters”, Annual Transactions of the Nordic Rheology Society, 20, 291–294 (2012)Suche in Google Scholar

MalmC. J., MenchJ. W., KendallD. L. and HiattG. D., “Aliphatic Acid Esters of Cellulose. Preparation by Acid Chloride–Pyridine Procedure”, Industrial Engineering Chemistry, 43, 684–688 (1951) 10.1021/ie50495a033Suche in Google Scholar

SealeyJ. E., SamaranayakeG., ToddJ. G. and GlasserW. G., “Novel Cellulose Derivatives. IV. Preparation and Thermal Analysis of Waxy Esters of Cellulose”, J. Polym. Sci. Part B: Polym. Phys., 34, 1613–1620 (1996) 10.1002/(SICI)1099-0488(19960715)34:9<1613::AID-POLB10>3.0.CO;2-ASuche in Google Scholar

TarasovaE., ŠumiginD., KudrjašovaM. and KrummeA., “Preparation of Cellulose Stearate and Cellulose Acetate Stearate in 1-Butyl-3-Methylimidazolium Chloride”, Key Eng. Mater., 559, 105–110 (2013) 10.4028/www.scientific.net/KEM.559.105Suche in Google Scholar

ToshB. N., SaikaC. N., “Thermal Degradation of Some Homogenously Esterified Products Prepared from Different Molecular Weight Fractions of High Alpha Cellulose Pulp”, J. Polym. Mater., 15, 185–195 (1998)Suche in Google Scholar

Vaca-GarciaC., GozzelinoG., GlasserW. G. and BorredonM. E., “Dynamic Mechanical Thermal Analysis Transitions of Partially and Fully Substituted Cellulose Fatty Esters”, J. Polym. Sci. Part B: Polym. Phys., 41, 281–288 (2003) 10.1002/polb.10378Suche in Google Scholar

WendlerF., KosanB., KriegM. and MeisterF., “Possibilities for the Physical Modification of Cellulose Shapes Using Ionic Liquid”, Macromol. Symp., 280, 112–122 (2009) 10.1002/masy.200950613Suche in Google Scholar

WhistlerR., WolfromM.: Methods in Carbohydrate Chemistry, Academic Press, New York, London (1967)Suche in Google Scholar

ZugenmaierP.: Crystalline Cellulose and Cellulose Derivatives, Characterization and Structures, Springer, Heidelberg, Berlin, p. 208 (2008)10.1007/978-3-540-73934-0Suche in Google Scholar