Multilayer Coextrusion of Polymer Composites to Develop Organic Capacitors

References

3M, U.S. Patent 6837698 (2005)Search in Google Scholar

5N Plus, Product Data Sheet, MCP 137/Metspec 281 Alloy (2014)Search in Google Scholar

http://www.5nplus.com/files/4413/9108/3788/Alloy_137_Tech_Data_Sheet_web.pdfSearch in Google Scholar

AlbaK., LaureP. and KhayatR. E., “Transient Two-Layer Thin-Film Flow inside a Channel”, Phys. Rev. E84, 026320 (2011) 10.1103/PhysRevE.84.026320Search in Google Scholar PubMed

AndersonP. D., DooleyJ. and MeijerH. E. H., “Viscoelastic Effects in Multilayer Polymer Extrusion”, Appl. Rheol., 16, 198–205 (2006)10.1515/arh-2006-0014Search in Google Scholar

AndrewsJ. H., CrescimannoM., DawsonN. J., MaoG., PetrusJ. B., SingerK. D., BaerE. and SongH., “Folding Flexible Co-Extruded All-Polymer Multilayer Distributed Feedback Films to Control Lasing”, Optics Express, 20, 15580–15588 (2012) 10.1364/OE.20.015580Search in Google Scholar PubMed

BairdD. G., CollaisD. I.: Polymer Processing: Principles and Design, Wiley-Interscience, New York (1998)Search in Google Scholar

BarnesH. A., HuttonJ. F. and WaltersK.: An Introduction to Rheology, Elsevier, New York (1989)Search in Google Scholar

BorzacchielloD., LericheE., BlottiereB. and GuilletJ., “On the Mechanism Of Viscoelastic Encapsulation Of Fluid Layers In Polymer Coextrusion”, J. Rheol., 58, 493–512 (2014) 10.1122/1.4865817Search in Google Scholar

CoyleD. J., MacoskoC. W., and ScrivenL. E., “Stability of Symmetric Film-Splitting between Counter-Rotating Cylinders”, J. Fluid Mech., 216, 437–459 (1990) 10.1017/S0022112090000490Search in Google Scholar

Dow Global Technology, U.S. Patent Application 20070184259 (2007)Search in Google Scholar

FarrisR. J., “Prediction of the Viscosity of Multimodal Suspensions from Unimodal Viscosity Data”, Trans. Soc. Rheol., 12, 281–301 (1968) 10.1122/1.549109Search in Google Scholar

FrankelN. A., AcrivosA., “Constitutive Equation for a Dilute Emulsion,” J. Fluid Mech.44, 65–78 (1970) 10.1017/S0022112070001696Search in Google Scholar

GrizzutiN., BuonocoreG. and IorioG., “Viscous Behavior and Mixing Rules for an Immiscible Model Polymer Blend”, J. Rheol.44, 149–164 (2000) 10.1122/1.551073Search in Google Scholar

HanC.D., “Study of Bicomponent Coextrusion of Molten Polymers”, J. Appl. Polym. Sci., 17, 1289–1303 (1973) 10.1002/app.1973.070170422Search in Google Scholar

HanemannT., HeldeleR., MuellerT. and HausseltJ., “Influence of Stearic Acid Concentration on the Processin of ZrO2-Containing Feedstocks Suitable for Micropowder Injection Molding”, Int. J. Applied Ceramic Techn., 8, 865–872 (2011) 10.1111/j.1744-7402.2010.02519.xSearch in Google Scholar

HannachiA., MitsoulisE., “Sheet Coextrusion of Polymer Solutions and Melts: Comparison between Simulation and Experiments”, Adv. Polym. Technol., 12, 217–231 (1993) 10.1002/adv.1993.060120301Search in Google Scholar

KimH., AbdalaA. A. and MacoskoC. W., “Graphene/Polymer Nanocomposites”, Macromolecules, 43, 6515–6530 (2010) 10.1021/ma100572eSearch in Google Scholar

KriegerI. M., DoughertyT. J., “A Mechanism for Non-Newtonian Flow in Suspensions of Rigid Spheres”, Trans. Soc. Rheol., 3, 137–152 (1959) 10.1122/1.548848Search in Google Scholar

LamnawarK., MaazouzA., “Rheology and Morphology of Multilayer Reactive Polymers: Effect of Interfacial Area in Interdiffusion/Reaction Phenomena”, Rheol. Acta, 47, 383–397 (2008) 10.1007/s00397-007-0244-1Search in Google Scholar

MahdaouiO., LaureP. and AggasantJ.-F., “Numerical Investigations Of Polyester Coextrusion Instabilities”, J. Non-Newtonian Fluid Mech., 195, 67–76 (2013). 10.1016/j.jnnfm.2012.12.014Search in Google Scholar

MaoG., AndrewsJ.CrescimannoM., SingerK. D., BaerE., HiltnerA., SongH. and ShakyaB., “Co-Extruded Mechanically Tunable Multilayer Elastomer Laser”, Optical Materials Express, 1, 108–114 (2011)10.1364/OME.1.000108Search in Google Scholar

MrozekR. A., ColeP. J., MondyL. A., RaoR. R., BiegL. F. and LenhartJ. L., “Highly Conductive, Melt Processable Polymer Composites Based on Nickel and Low Melting Eutectic Metal”, Polymer, 51, 2954–2958 (2010) 10.1016/j.polymer.2010.04.067Search in Google Scholar

MussonL. C., “Two-Layer Slot Coating”, Dissertation, University of Minnesota, Minneapolis (2001)Search in Google Scholar

NazarenkoS., HiltnerA. and BaerE., “Polymer Microlayer Structures with Anisotropic Conductivity”, J. Materials Sci., 34, 1461–1470 (1999) 10.1023/A:1004527205239Search in Google Scholar

RaoR. R., MondyL. A., BaerT. A., NobleD. R., BrooksC. F. and HopkinsM. M., “eBook Chapter 3D Numerical Modelling of Mould Filling of a Coat Hanger Distributer and Rectangular Cavity”, in Numerical Modelling, Tech - Open Access Publisher, Rijeka, Croatia, (2012a), http://cdn.intechopen.com/pdfs/33076.pdf10.5772/37666Search in Google Scholar

RaoR. R., MondyL. A., NobleD. R., MoffatH. K., AdolfD. B. and NotzP. K., “A Level Set Method to Study Foam Processing: A Validation Study”, Int. J. Numer. Meth. Fluids, 68, 1362–1392 (2012b) 10.1002/fld.2671Search in Google Scholar

RaoR. R., MondyL., CollinsR., BaerT., MrozekR., SchunkP. R., HopkinsM. and LenhartJ., “Finite Element Analysis of Multilayer Co-Extrusion”, SAND2011–6136, Sandia National Laboratories, Albuquerque (2011) http://prod.sandia.gov/techlib/access-control.cgi/2011/116136.pdf10.2172/1029813Search in Google Scholar

SandlerJ., ShafferM. S. P., PrasseT., BauhoferW., SchulteK. and WindleA. H., “Development of a Dispersion Process for Carbon Nanotubes in an Epoxy Matrix and the Resulting Electrical Properties”, Polymer, 40, 5967–5971 (1999) 10.1016/S0032-3861(99)00166-4Search in Google Scholar

SchunkP. R., SackingerP. A., RaoR. R., ChenK. S., BaerT. A., LabrecheD. A., SunA. C., HopkinsM. M., SubiaS. R., MoffatH. K., SecorR. B., RoachR. A., WilkesE. D., NobleD. R., HopkinsP. L., NotzP. K. and RobertsS. A.: GOMA 6.0: An Open Source Full-Newton Finite Element Program for Free and Moving Boundary Problems with Coupled Fluid/Solid Momentum, Energy, Mass, and Chemical Species Transport, Sandia National Laboratories, Albuquerque, NM (2014), http://goma.github.io/Search in Google Scholar

SchunkP. R., SackingerP. A., RaoR. R., ChenK. S., BaerT. A., LabrecheD. A., SunA. C., HopkinsM. M, SubiaS. R., MoffatH. K., SecorR. B., RoachR. A., WilkesE. D., NobleD. R., HopkinsP. L., NotzP. K. and RobertS. A.: GOMA 6.0 – A Full-Newton Finite Element Program for Free and Moving Boundary Problems with Coupled Fluid/Solid Momentum, Energy, Mass, and Chemical Species Transport: User's Guide, Sandia National Laboratories, SAND2013–1844, Sandia National Laboratories, Albuquerque (2013)10.2172/1089869Search in Google Scholar

SethianJ.A.: Level Set Methods and Fast Marching Methods, 2^nd Edition, Vol. 3, Cambridge Monographs on Applied and Computational Mathematics, Cambridge University Press, New York, USA (1999)Search in Google Scholar

ShakoorA., ZahraR. T. and HafeezA., “Morphological, Thermal, and Conductivity Studies of Poly(methyl methacrylate)/Polyaniline Dodecylbenzenesulfonate Blends”, Poly. Sci., Ser. A51, 898–903 (2009)10.1134/S0965545X09080082Search in Google Scholar

SongJ. H., EvansJ. R. G., “Ultrafine Ceramic Powder Injection Molding: The Role of Dispersants”, J. Rheol., 40, 131–152 (1996) 10.1122/1.550737Search in Google Scholar

SorensenD. C., LehoucqR. B., YangC. and MaschhoffK., ARPACK and P_ARPACK, Rice University (2008) http://www.caam.rice.edu/software/ARPACK/Search in Google Scholar

TaoW. H., ChenC., HoC. E., ChenW. T. and KaoC. R., “Selective Interfacial Reaction between Ni and Eutectic BiSn Lead-Free Solder”, Chem. Mater., 13, 1051–1056 (2001). 10.1021/cm000803lSearch in Google Scholar

ThomasD. G., “Transport Characteristics of Suspension.8. A Note on Viscosity of Newtonian Suspensions of Uniform Spherical Particles”, J. Colloid Science, 20, 267–277 (1965) 10.1016/0095-8522(65)90016-4Search in Google Scholar

ValetteR., LaureP., DemayY. and AgassantJ.-F., “Convective Linear Stability Analysis of Two-Layer Coextrusion Flow for Molten Polymers”, J. Non-Newtonian Fluid Mech., 121, 41–53 (2004) 10.1016/j.jnnfm.2004.04.002Search in Google Scholar

ValetteR., LaureP., DemayY. and FortinA., “Convective Instabilities in Coextrusion Process,” Int. Polym. Proc., 16, 192–197 (2001) 10.3139/217.1635Search in Google Scholar

ViaM. D., KingJ. A., KeithJ. M. and BoguckiG. R., “Electrical Conductivity Modeling of Carbon Black/Polycarbonate, Carbon Nanotube/Polycarbonate, and Exfoliated Graphite Nanoplatelet/Polycarbonate Composites”, J. Appl. Polym. Sci., 124, 182–189 (2012) 10.1002/app.35096Search in Google Scholar

WagnerJ.Jr.: Multilayer Flexible Packaging Technology and Applications for the Food, Personal Care, and Over-the-Counter Pharmaceutical Industries, Elsevier Science, Burlington (2010)Search in Google Scholar

WilsonG. M., KhomamiB., “An Experimental Investigation of the Interfacial Instabilities in Multilayer Flow of Viscoelastic Fluids. 1. Incompatible Polymer Systems”, J. Non-Newtonian Fluid Mech., 45, 355–384 (1992) 10.1016/0377-0257(92)80068-9Search in Google Scholar

WindlassH., RajP. M., BalaramanD., BhattacharyaS. K. and TummalaR. R., “Colloidal Processing of Polymer Ceramic Nanocomposite Integral Capacitors”, IEEE Trans. Electron. Packag. Manuf., 26, 100–105 (2003) 10.1109/TEPM.2003.817719Search in Google Scholar

WuJ., BhattacharyaS., PramanikR. and WongC. P., “High Dielectric Constant Polymer-Ceramic (Epoxy Varnish-Barium Titanate) Nanocomposites at Moderate Filler Loadings for Embedded Capacitors”, J. Electron. Mater., 35, 2009–2015 (2006) 10.1007/s11664-006-0307-6Search in Google Scholar

XuS., WenM., GuoS., WangM., DuQ., ShenJ., ZhangY. and JiangS., “Structure and Properties of Electrically Conducting Composites Consisting of Alternating Layers of Pure Polypropylene and Polypropylene with a Carbon Black Filler”, Polymer, 49, 4861–4870 (2008) 10.1016/j.polymer.2008.08.056Search in Google Scholar

YihC. S., “Instability due to Viscosity Stratification,” J. Fluid Mech., 27, 337–352 (1967) 10.1017/S0022112067000357Search in Google Scholar

YoonC.-B., LeeS.-H., LeeS.-M. and KimH.-E., “Multilayer Bender-Type PZT-PZN Actuator by Co-Extrusion Process”, J. European Ceramic Soc., 26, 2345–2348 (2006) 10.1016/j.jeurceramsoc.2005.04.003Search in Google Scholar

YuT. C., HanC. D., “Stratified 2-Phase Flow of Molten Polymers,” J. Appl. Polym. Sci., 17, 1203–1225 (1972) 10.1002/app.1973.070170417Search in Google Scholar

ZhaoR., MacoskoC. W., “Slip at Polymer-Polymer Interfaces: Rheological Measurements on Coextruded Multilayers,” J. Rheol., 46, 145–167 (2002) 10.1122/1.1427912Search in Google Scholar