UV-Curable Technique of Magnetic Roller Soft Mold and Microstructure Pattern Replication

References

Ahn, S. H., Guo, L. J., “Large-Area Roll-to-Roll and Roll-to-Plate Nanoimprint Lithography: A Step toward High-Throughput Application of Continuous Nanoimprinting”, ACS Nano., 3, 2304–2310 (2009) 10.1021/nn9003633Suche in Google Scholar PubMed

Ahn, S. H., Kim, J. S. and Guo, L. J., “Bilayer Metal Wire-Grid Polarizer Fabricated by Roll-To-Roll Nanoimprint Lithography on Flexible Plastic Substrate”, J. Vac. Sci. Technol., 6, 2388–2391 (2007)Suche in Google Scholar

Firouzi, A., Kumar, D., Bull, L. M., Besier, T., Sieger, P., Hue, Q. and Walker, S. A., “Cooperative Organization of Inorganic-Surfactant and Biomimetic Assemblies”, Science, 267, 1138–1143 (1995) 10.1126/science.7855591Suche in Google Scholar PubMed

Huang, J. C., Weng, Y. J., Yang, S. Y., Weng, Y. C. and Wang, J. Y., “Fabricating Nanostructures by Atomic Force Microscopy”, Jpn. J. Appl. Phys.48, 095001 (2009) 10.1143/JJAP.48.095001Suche in Google Scholar

Ishida, Y., Nakagawa, G. and Asano, T., “Inkjet-Printed Metal-Colloid-Induced Crystallization of Amorphous Silicon”, Jpn. J. Appl. Phys., 46, 1263–1267 (2007)10.1143/JJAP.46.1263Suche in Google Scholar

Jeon, S., Menard, E., Park, J. U., Maria, J., Meitl, M., Zaumseil, J. and Rogers, J. A., “Three-Dimensional Nanofabrication with Rubber Stamps and Conformable Photomasks”, Adv. Mater., 16, 1369–1373 (2004)10.1002/adma.200400593Suche in Google Scholar

Jeong, J., Hong, Y., “Gate Overlap Optimization and Performance Variation for Thin-Film Transistors with Source/Drain Edge Waviness”, Jpn. J. Appl. Phys., 49, 036501–036501-5 (2010)10.1143/JJAP.49.036501Suche in Google Scholar

Ji, Y. Y., Chang, H. K., Hong, Y. C. and Lee, S. H., “Formation of Hydrophobic and Water-Repellent Surface on Polyester Fibers Using Ar/Hexamethyldisiloxane Plasma at Atmosperic Pressure”, Jpn. J. Appl. Phys., 47, 4687–4691 (2008)10.1143/JJAP.47.4687Suche in Google Scholar

Jiang, L. T., Huang, T. C., Chiu, C. R., Chang, C. Y. and Yang, S. Y., “Fabrication of Plastic Microlens Arrays Using Hybrid Extrusion Rolling Embossing with a Metallic Cylinder Mold Fabricated Using Dry Film Resist”, Opt. Express, 15, 12088–12094 (2007) 10.1364/OE.15.012088Suche in Google Scholar

Kumar, A., Whitesides, G. M., “Features of Gold Having Micrometer to Centimeter Dimensions Can Be Formed through a Combination of Stamping with an Elastomeric Stamp and an Alkanethiol Ink Followed by Chemical Etching”, Appl. Phys. Lett., 63, 2002–2004 (1993) 10.1063/1.110628Suche in Google Scholar

Lin, Y. C., Weng, Y. J., Pen, D. J. and Li, H. C., “Deformation Model of Brittle and Ductile Materials under Nano-Indentation”, Mater. Des., 30, 1643–1649 (2009) 10.1016/j.matdes.2008.07.028Suche in Google Scholar

Mekaru, H., Kusumi, S., Sato, N., Shimizu, M., Yamashita, M., Shimada, O. and Hattori, T., “Development of Three Dimensional LIGA Process to Fabricate Spiral Microcoil”, Jpn. J. Appl. Phys.44, 5749–5754 (2005) 10.1143/JJAP.44.5749Suche in Google Scholar

Minowa, T., Tsutsui, M., Kurokawa, S. and Sakai, A., “Break Conductance of Pt Nanocontacts”, Jpn. J. Appl. Phys., 44, 6321–6326 (2005)10.1143/JJAP.44.6321Suche in Google Scholar

Nakagawa, G., Asano, T. and Miyasaka, M., “Location Control of Si Thin-Film Grain Using Ni Imprint and Excimer Laser Annealing”, Jpn. J. Appl. Phys., 45, 4335–4339 (2006)10.1143/JJAP.45.4335Suche in Google Scholar

Takakuwa, A., Ikawa, M., Fujita, M. and Yase, K., “Micropatterning of Electrodes by Microcontact Printing Method and Application to Thin Film Transistor Devices”, Jpn. J. Appl. Phys., 46, 5960–5963 (2007)10.1143/JJAP.46.5960Suche in Google Scholar

Takakuwa, A., Azumi, R., “Influence of Solvents in Micropatterning of Semiconductors by Microcontact Printing and Application to Thin-Film Transistor Devices”, Jpn. J. Appl. Phys., 47, 1115–1118 (2008) 10.1143/JJAP.47.1115Suche in Google Scholar

Tohno, I., Ikagawa, M., Shinmura, T., Kataoka, Y., Okudaira, K., Ueno, N. and Sugita, K., “Selective Plasma Surface Modification of Resist for Patterning Hydrophobic and Hydrophilic Regions”, Jpn. J. Appl. Phys., 47, 1677–1682 (2008)10.1143/JJAP.47.1677Suche in Google Scholar

Utsumi, Y., Kishimoto, T., Hattori, T. and Hara, T., “Large-Area X-ray Lithography System for LIGA Process Operating in Wide Energy Range of Synchrotron Radiation”, Jpn. J. Appl. Phys., 44, 5500–5504 (2005) 10.1143/JJAP.44.5500Suche in Google Scholar

Weng, Y. J., Yang, S. Y., Wu, M. S., Weng, Y. C. and Wang, L. A., “A Study on the Innovative Microlens Projection Lithography Applied to the Production of Microstructures”, Polym. Adv. Tech., 18, 841–844 (2007a) 10.1002/pat.952Suche in Google Scholar

Weng, Y. J., Weng, Y. C., Yang, S. Y. and Wang, L. A., “Fabrication of Optical Waveguide Devices Using Gas-Assisted UV Micro/Nanoimprinting with Soft Mold”, Polym. Adv. Tech., 18, 876–882 (2007b) 10.1002/pat.921Suche in Google Scholar

Weng, Y. J., Yang, S. Y., Weng, Y. C. and Wang, L. A., “Fabrication of Buried Waveguide Microstructure Using Gas-Assisted Micro/Nanoimprinting with Soft Mold”, Polym. Adv. Tech., 18, 993–998 (2007c) 10.1002/pat.921Suche in Google Scholar

Weng, Y. J., Weng, Y. C., “Technological Development of Advanced Asymmetric Magnetic Soft Mold Micro-Imprint Lithography”, Polym. Plast. Tech. Eng., 49, 713–717 (2010) 10.1080/03602551003652672Suche in Google Scholar

Wong, Y. C., Weng, Y. J., Weng, Y. C. and Lee, J. Y., “Development and Study of Applications Combining Nanopowder Imprint Lithography and Array-Type UV-Curing Technology for Micro-Lens Molding”, Polym. Plast. Tech. Eng., 49, 853–860 (2010) 10.1080/03602551003664602Suche in Google Scholar