Article
Licensed
Unlicensed Requires Authentication

Seikei Kakou Abstracts

Published/Copyright: March 11, 2015
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 30 Issue 1

Published Online: 2015-03-11
Published in Print: 2015-03-02

© 2015, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Extrusion Defects and Flow Instabilities of Molten Polymers
  5. Investigating Thermal Stability and Flame Retardant Properties of Synthesized Halloysite Nanotubes (HNT)/Ethylene Propylene Diene Monomer (EPDM) Nanocomposites
  6. Absorption Coefficient Measurement in Laser Transmission Welding of Thermoplastics
  7. Styrene/Isoprene/Styrene Thermoplastic Elastomer Prepared by Anionic Bulk Polymerization in a Twin-Screw Extruder
  8. Improving Film Die Flow Uniformity Using Optimization Methods Coupled with Finite Element Computational Fluid Dynamics (CFD) Analysis
  9. UV-Curable Technique of Magnetic Roller Soft Mold and Microstructure Pattern Replication
  10. Rheological Indicators for Environmental Stress Cracking Resistance of Polyethylene
  11. Effect of Alumina Particles Embedded in Natural Rubber Foams on Cell Morphology and Thermo-Mechanical Properties
  12. Effects of SEBS-g-MA on Rheology, Morphology and Mechanical Properties of PET/HDPE Blends
  13. Measurement and Numerical Simulation of Void and Warpage in Glass Fiber Reinforced Molded Chunky Parts
  14. Experimental Study for Extrusion of Polypropylene/Wood Flour Composites
  15. A Personal Perspective on the Use of Modelling Simulation for Polymer Melt Processing
  16. Slip Heating in Die Drool with Viscous Dissipation
  17. PPS News
  18. PPS News
  19. Seikei Kakou Abstracts
  20. Seikei Kakou Abstracts
https://doi.org/10.3139/217.015015

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Extrusion Defects and Flow Instabilities of Molten Polymers
  5. Investigating Thermal Stability and Flame Retardant Properties of Synthesized Halloysite Nanotubes (HNT)/Ethylene Propylene Diene Monomer (EPDM) Nanocomposites
  6. Absorption Coefficient Measurement in Laser Transmission Welding of Thermoplastics
  7. Styrene/Isoprene/Styrene Thermoplastic Elastomer Prepared by Anionic Bulk Polymerization in a Twin-Screw Extruder
  8. Improving Film Die Flow Uniformity Using Optimization Methods Coupled with Finite Element Computational Fluid Dynamics (CFD) Analysis
  9. UV-Curable Technique of Magnetic Roller Soft Mold and Microstructure Pattern Replication
  10. Rheological Indicators for Environmental Stress Cracking Resistance of Polyethylene
  11. Effect of Alumina Particles Embedded in Natural Rubber Foams on Cell Morphology and Thermo-Mechanical Properties
  12. Effects of SEBS-g-MA on Rheology, Morphology and Mechanical Properties of PET/HDPE Blends
  13. Measurement and Numerical Simulation of Void and Warpage in Glass Fiber Reinforced Molded Chunky Parts
  14. Experimental Study for Extrusion of Polypropylene/Wood Flour Composites
  15. A Personal Perspective on the Use of Modelling Simulation for Polymer Melt Processing
  16. Slip Heating in Die Drool with Viscous Dissipation
  17. PPS News
  18. PPS News
  19. Seikei Kakou Abstracts
  20. Seikei Kakou Abstracts
Downloaded on 14.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.015015/html
Scroll to top button