Morphology Control and Stabilization in Immiscible Polypropylene and Polyamide 6 Blends with Organoclay

J. Huang; Y. Zhu; W. Jiang; R. Cardinaels; P. Moldenaers; D. Shi

doi:10.3139/217.2912

Article

Morphology Control and Stabilization in Immiscible Polypropylene and Polyamide 6 Blends with Organoclay

J. Huang , Y. Zhu , W. Jiang , R. Cardinaels , P. Moldenaers and D. Shi

Published/Copyright: August 12, 2014

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal International Polymer Processing Volume 29 Issue 4

Abstract

In the current study, 70/30 (w/w) polypropylene (PP)/polyamide 6 (PA6)/organoclay ternary blends were prepared by melt mixing in three different blending sequences, i. e., organoclay premixed with PA6 and then mixed with PP (S1 blending sequence), organoclay premixed with PP and then mixed with PA6 (S2 blending sequence), and organoclay, PA6 and PP mixed simultaneously (S3 blending sequence). The effects of organoclay on the phase morphologies, rheological properties and mechanical properties of the blends are examined to reveal the role of organoclay in these immiscible blends. First of all, the dispersion and distribution of organoclay is investigated using XRD and TEM techniques. The organoclay is exfoliated and distributed in the dispersed PA6 phase as well as at the interface between PA6 and PP. Interestingly, more organoclay sheets are observed at the interface when the S2 or S3 blending sequences are utilized. From the SEM images, it is clear that the domain size of the PA6 phase decreases remarkably after introducing organoclay into the PP/PA6 blends. Two different rheological protocols are applied to probe the effect of organoclay on the morphology of the blend by in-situ monitoring the morphological evolution. The rheological results reveal that the phase morphology of the PP/PA6 blends remains relatively stable during shear for a wide range of shear rates when 1.0 wt% organoclay has been added. For the blends with a relatively high clay loading (5.0 wt%), a characteristic and pronounced “plateau” is observed in the low frequency range of the G′-ω curves, which indicates the presence of a percolating network of clay nanosheets. From the mechanical measurements, we find that the tensile strength of the blends increases slightly first and then declines dramatically with increasing organoclay content. Moreover, the elongation at break drops sharply as the organoclay content increases. In summary, it is clear that the organoclay can effectively reduce the domain size of the dispersed PA6 phase and stabilize the phase morphology in shear flow. However, the mechanical properties of the blends are not really improved by clay addition, even though a cocontinuous morphology with a percolated clay network was generated.

* Mail address: Yutian Zhu, State Key Laboratory of Polymer Physics and Chemistry, Chinese Academy of Sciences, 5625 Renmin St., Changchun 130022, PRC, E-mail: ytzhu@ciac.ac.cn

References

Ahn, Y. C., Paul, D. R., “Rubber Toughening of Nylon 6 Nanocomposites”, Polymer, 47, 2830–2838 (2006) 10.1016/J.Polymer.2006.02.074Search in Google Scholar

Chow, W. S., Ishak, Z. A. M., Ishiaku, U. S., Karger-Kocsis, J. and Apostolov, A. A., “The Effect of Organoclay on the Mechanical Properties and Morphology of Injection-Molded Polyamide 6/Polypropylene Nanocomposites”, J. Appl. Polym. Sci., 91, 175–189 (2004) 10.1002/App.13244Search in Google Scholar

Fang, Z. P., Xu, Y. Z. and Tong, L. F., “Effect of Clay on the Morphology of Binary Blends of Polyamide 6 with High Density Polyethylene and HDPE-Graft-Acrylic Acid”, Polym. Eng. Sci., 47, 551–559 (2007) 10.1002/Pen.20675Search in Google Scholar

Fenouillot, F., Cassagnau, P. and Majesté, J. C., “Uneven Distribution of Nanoparticles in Immiscible Fluids: Morphology Development in Polymer Blends”, Polymer, 50, 1333–1350 (2009) 10.1016/J.Polymer.2008.12.029Search in Google Scholar

Graebling, D., Muller, R. and Palierne, J. F., “Linear Viscoelastic Behavior of some Incompatible Polymer Blends in the Melt. Interpretation of Data with a Model of Emulsion of Viscoelastic Liquids”, Macromolecules, 26, 320–329 (1993) 10.1021/ma00054a011Search in Google Scholar

Han, C. D.: Rheology and Processing of Polymeric Materials, Volume 2, Polymer Processing, Oxford University, New York (2007)10.1093/oso/9780195187830.001.0001Search in Google Scholar

Harrats, C., Thomas, S. and Groeninckx, G.: Micro- and Nanostructured Multiphase Polymer Blend Systems, CRC Taylor & Francis, New York (2006)10.1201/9781420026542Search in Google Scholar

Honerkamp, J., Weese, J., “A Nonlinear Regularization Method for the Calculation of Relaxation Spectra”, Rheol. Acta, 32, 65–73 (1993) 10.1007/BF00396678Search in Google Scholar

Hong, J. S., Kim, Y. K., Ahn, K. H., Lee, S. J. and Kim, C., “Interfacial Tension Reduction in PBT/PE/Clay Nanocomposite”, Rheol. Acta, 46, 469–478 (2007) 10.1007/S00397-006-0123-1Search in Google Scholar

Hong, J. S., Namkung, H., Ahn, K. H., Lee, S. J. and Kim, C., “The Role of Organically Modified Layered Silicate in the Breakup and Coalescence of Droplets in PBT/PE Blends”, Polymer, 47, 3967–3975 (2006) 10.1016/J.Polymer.2006.03.077Search in Google Scholar

Huitric, J., Ville, J., Mederic, P., Moan, M. and Aubry, T., “Rheological, Morphological and Structural Properties of PE/PA/Nanoclay Ternary Blends: Effect of Clay Weight Fraction”, J. Rheol., 53, 1101–1119 (2009) 10.1122/1.3153551Search in Google Scholar

Huo, Y. L., Groeninckx, G. and Moldenaers, P., “Rheology and Morphology of Polystyrene/Polypropylene Blends with in Situ Compatibilization”, Rheol. Acta, 46, 507–520 (2007) 10.1007/S00397-006-0158-3Search in Google Scholar

Janssen, J. M. H., Meijer, H. E. H., “Droplet Breakup Mechanisms: Stepwise Equilibrium versus Transient Dispersion”, J. Rheol., 37, 597–608 (1993) 10.1122/1.550385Search in Google Scholar

Khatua, B. B., Lee, D. J., Kim, H. Y. and Kim, J. K., “Effect of Organoclay Platelets on Morphology of Nylon-6 and Poly(Ethylene-Ran-Propylene) Rubber Blends”, Macromolecules, 37, 2454–2459 (2004) 10.1021/Ma0352072Search in Google Scholar

Kontopoulou, M., Liu, Y. Q., Austin, J. R. and Parent, J. S., “The Dynamics of Montmorillonite Clay Dispersion and Morphology Development in Immiscible Ethylene-Propylene Rubber/Polypropylene Blends”, Polymer, 48, 4520–4528 (2007) 10.1016/J.Polymer.2007.05.068Search in Google Scholar

Krishnamoorti, R., Yurekli, K., “Rheology of Polymer Layered Silicate Nanocomposites”, Curr. Opin. Colloid Interface Sci., 6, 464–470 (2001) 10.1016/S1359-0294(01)00121-2Search in Google Scholar

Labaume, I., Huitric, J., Mederic, P. and Aubry, T., “Structural and Rheological Properties of Different Polyamide/Polyethylene Blends Filled with Clay Nanoparticles: A Comparative Study”, Polymer, 54, 3671–3679 (2013a) 10.1016/J.Polymer.2013.05.020Search in Google Scholar

Labaume, I., Mederic, P., Huitric, J. and Aubry, T., “Comparative Study of Interphase Viscoelastic Properties in Polyethylene/Polyamide Blends Compatibilized with Clay Nanoparticles or with a Graft Copolymer”, J. Rheol., 57, 377–392 (2013b) 10.1122/1.4774322Search in Google Scholar

Lee, H. S., Fasulo, P. D., Rodgers, W. R. and Paul, D. R., “TPO Based Nanocomposites. Part 1. Morphology and Mechanical Properties”, Polymer, 46, 11673–11689 (2005) 10.1016/J.Polymer.2005.09.068Search in Google Scholar

Li, Y. J., Shimizu, H., “Novel Morphologies of Poly(phenylene oxide) (PPO)/Polyamide 6 (PA6) Blend Nanocomposites”, Polymer, 45, 7381–7388 (2004) 10.1016/J.Polymer.2004.09.018Search in Google Scholar

Moghbelli, E., Sue, H. J. and Jain, S., “Stabilization and Control of Phase Morphology of PA/SAN Blends via Incorporation of Exfoliated Clay”, Polymer, 51, 4231–4237 (2010) 10.1016/J.Polymer.2010.05.025Search in Google Scholar

Motamedi, P., Bagheri, R., “Investigation of the Nanostructure and Mechanical Properties of Polypropylene/Polyamide 6/Layered Silicate Ternary Nanocomposites”, Mater. Des., 31, 1776–1784 (2010) 10.1016/J.Matdes.2009.11.013Search in Google Scholar

Palierne, J. F., “Linear Rheology of Viscoelastic Emulsions with Interfacial Tension”, Rheol. Acta, 29, 204–214 (1990) 10.1007/BF01331356Search in Google Scholar

Ray, S. S., Pouliot, S., Bousmina, M. and Utracki, L. A., “Role of Organically Modified Layered Silicate as an Active Interfacial Modifier in Immiscible Polystyrene/Polypropylene Blends”, Polymer, 45, 8403–8413 (2004) 10.1016/J.Polymer.2004.10.009Search in Google Scholar

Ray, S. S., Bousmina, M. and Maazouz, M., “Morphology and Properties of Organoclay Modified Polycarbonate/Poly(methyl methacrylate Blend”, Polym. Eng. Sci., 46, 1121–1129 (2006) 10.1002/Pen.20598Search in Google Scholar

Ray, S. S., Bandyopadhyay, J. and Bousmina, M., “Effect of Organoclay on the Morphology and Properties of Polypropylene/Poly[(butylenesuccinate)-co-adipate] Blends”, Macromol. Mat. Eng., 292, 729–747 (2007) 10.1002/Mame.200700029Search in Google Scholar

Solomon, M. J., Almusallam, A. S., Seefeldt, K. F., Somwangthanaroj, A. and Varadan, P., “Rheology of Polypropylene/Clay Hybrid Materials”, Macromolecules, 34, 1864–1872 (2001) 10.1021/ma001122eSearch in Google Scholar

Tiwari, R. R., Paul, D. R., “Effect of Organoclay on the Morphology, Phase Stability and Mechanical Properties of Polypropylene/Polystyrene Blends”, Polymer, 52, 1141–1154 (2011) 10.1016/J.Polymer.2011.01.019Search in Google Scholar

Tucker, C. L., Moldenaers, P., “Microstructural Evolution in Polymer Blends”, Annu. Rev. Fluid Mech., 34, 177–210 (2002) 10.1146/annurev.fluid.34.082301.144051Search in Google Scholar

Utracki, L. A.: Polymer Alloys and Blends: Thermodynamics and Rheology. Hanser, Munich, New York (1989)Search in Google Scholar

Utracki, L. A.: Clay-Containing Polymeric Nanocomposites. Rapra Technology Limited, Shawbury, Shrewsbury, Shropshire (2004)Search in Google Scholar

Vandebril, S., Vermant, J. and Moldenaers, P., “Efficiently Suppressing Coalescence in Polymer Blends Using Nanoparticles: Role of Interfacial Rheology”, Soft Matter., 6, 3353–3362 (2010) 10.1039/B927299bSearch in Google Scholar

Vermant, J., Cioccolo, G., Nair, K. G. and Moldenaers, P., “Coalescence Suppression in Model Immiscible Polymer Blends by Nano-Sized Colloidal Particles”, Rheol. Acta, 43, 529–538 (2004) 10.1007/S00397-004-0381-8Search in Google Scholar

Ville, J., Médéric, P., Huitric, J. and Aubry, T., “Structural and Rheological Investigation of Interphase in Polyethylene/Polyamide/Nanoclay Ternary Blends”, Polymer, 53, 1733–1740 (2012) 10.1016/j.polymer.2012.02.040Search in Google Scholar

Vo, L. T., Giannelis, E. P., “Compatibilizing Poly(vinylidene fluoride)/Nylon-6 Blends with Nanoclay”, Macromolecules, 40, 8271–8276 (2007) 10.1021/Ma071508qSearch in Google Scholar

Wang, K., Chen, Y. and Zhang, Y., “Effects of Organoclay Platelets on Morphology and Mechanical Properties in PTT/EPDM-G-MA/Organoclay Ternary Nanocomposites”, Polymer, 49, 3301–3309 (2008) 10.1016/J.Polymer.2008.05.025Search in Google Scholar

Wang, Y., Zhang, Q., Fu, Q., “Compatibilization of Immiscible Poly-(propylene)/Polystyrene Blends Using Clay”, Macromol. Rapid Commun., 24, 231–235 (2003) 10.1002/marc.200390026Search in Google Scholar

Yoo, Y., Cui, L., Yoon, P. J. and Paul, D. R., “Morphology and Mechanical Properties of Rubber Toughened Amorphous Polyamide/MMT Nanocomposites”, Macromolecules, 43, 615–624 (2010) 10.1021/Ma902232 gSearch in Google Scholar

Yoo, Y., Park, C., Lee, S. G., Choi, K. Y., Kim, D. S. and Lee, J. H., “Influence of Addition of Organoclays on Morphologies in Nylon 6/LLDPE Blends”, Macromol. Chem. Phys., 206, 878–884 (2005) 10.1002/Macp.200400526Search in Google Scholar

Zhu, Y. T., Cardinaels, R., Mewis, J. and Moldenaers, P., “Rheological Properties of PDMS/Clay Nanocomposites and their Sensitivity to Microstructure”, Rheol. Acta, 48, 1049–1058 (2009) 10.1007/s00397-009-0387-3Search in Google Scholar

Received: 2013-12-24

Accepted: 2014-03-12

Published Online: 2014-08-12

Published in Print: 2014-08-14

You are currently not able to access this content.

Articles in the same Issue

https://doi.org/10.3139/217.2912