Experimental Studies on Screw Characteristics in Closely Intermeshing Counter-rotating Twin Screw Extruder
-
M.-H. Hong
Abstract
Experimental studies were carried out to characterize the screw pumping behavior of various screw elements for a closely intermeshing counter-rotating twin screw extruder. The pumping capacity of the screw elements was compared to earlier flow simulations by some the authors of this type of twin screw extruder.
References
Doboczky, Z., Einschnecke – Doppelschnecke“, Plastverarbeiter, 16, 57–67 (1965)Search in Google Scholar
Doboczky, Z., “Theoretische und wirkliche Ausstoßleistung der Doppelschnecken-Extruder”, Plastverarbeiter, 16, 395–400 (1965)Search in Google Scholar
Hong, M. H., White, J. L., “Simulation of Flow in an Intermeshing Modular Counter-Rotating Twin Screw Extruder: Non-Newtonian and Non-Isothermal Behavior”, Int. Polym. Proc., 14, 136–143 (1999)Search in Google Scholar
Hong, M. H., White, J. L., “Fluid Mechanics of Intermeshing Counter-rotating Twin Screw Extruders”, Int. Polym. Proc., 13, 342–346 (1998)Search in Google Scholar
Janssen, L. P. B. M., Mulders, L. H. R. M., Smith, J. M., “A Model for the Output from the Pump Zone of the Double-screw or Processor or Extruder”, Plastics and Polym., 43, 93–98 (1975)Search in Google Scholar
Janssen, L. P. B. M., Smith, J. M., “Twin-Screw Extrusion – The State of the Art”, Plastics Rubber Proc., 44, 90–95 (1976)Search in Google Scholar
Janssen, L. P. B. M., Twin Screw Extrusion, Elsevier Publishers, Amsterdam (1978)Search in Google Scholar
Kiesskalt, S., VDI Zeitschr., 71, 453–458 (1927)Search in Google Scholar
Leistritz, P., Burghauser, F., German Patent 453 727 (1927)Search in Google Scholar
Li, T., Manas Zloczower, I., “Flow-Field Analysis of an Intermeshing Counterrotating Twin-Screw Extruder”, Polym. Eng. Sci., 34, 551–558 (1994)Search in Google Scholar
Montelius, C. O. J., Teknist Tidskrift, 6, 61–66 (1933)Search in Google Scholar
Montelius, C. O. J., US Patent 1 698 802 (1929)Search in Google Scholar
Montelius, C. O. J., US Patent 1 965 557 (1934)10.1136/bmj.1.3829.965-aSearch in Google Scholar
Schenkel, G., Kunststoffe Extrudertechnik, Hanser Publishers, Munich (1963)Search in Google Scholar
White, J. L., Adewale, A., “A Unified View of Modeling Flow in Counter-Rotating Twin-Screw Extruders”, Int. Polym. Proc., 8, 210–217 (1993)Search in Google Scholar
White, J. L., Twin Screw Extrusion, Technology and Principles, Hanser Publishers, Munich (1990)Search in Google Scholar
Wilczynski, K., Jiang, Q., White, J. L., “A composite Model for Melting, Pressure and Fill Factor Profiles in a Metered Fed Closely Intermeshing Counter-Rotating Twin Screw Extruder”, Int. Polym. Proc., 22, 198–203 (2007)Search in Google Scholar
© 2008, Carl Hanser Verlag, Munich
Articles in the same Issue
- Contents
- Contents
- Regular Contributed Articles
- The Dynamic Apparent Viscosity of Polymer Melts During Pulsatile Extrusion Flow with Vibration Force Field
- Generation of Microcellular Foams by Supercritical Carbon Dioxidein a PMMA Compound
- Influence of Uniaxial Extension on the Mechanical Properties of PET and PEN Films
- Analysis of the Isothermal Compression in Nanoimprint Lithography Assuming a Power-Law Fluid
- Non-Isothermal Simulation of the Film Blowing Process Using Multi-Mode Extended Pom-Pom Model
- Flow Analysis of Flat Spiral Dies and Comparison with Cylindrical Spiral Mandrel Dies
- Development of Polymer Blend Morphology along an Extruder with Different Screw Geometries
- A Mechanical Model for Stress Developmentin PA12 Tube Extrusion
- Shrinkage Analysis on Convex Shellby Injection Molding
- Melting Mechanism of Thermoplastic Elastomers and Comparison to Polyolefin Thermoplastic Melting Studies in a Single Screw Extruder
- Thermal Degradation of Meta- and Para-Aramid Fibers in Different Atmospheres
- Experimental Studies on Screw Characteristics in Closely Intermeshing Counter-rotating Twin Screw Extruder
- Experimental Analysis of Heat Transfer in Rotational Molding Process
- Polyetheretherketone Films with Low Thermal Expansion for Flexible Printed Circuit Boards
- Experimental Study and Modeling of Flow Behavior and Orientation Kinetics of Layered Silicate/Polypropylene Nanocomposites in Start-up of Shear Flows
- Polystyrene/Phosphonium Organoclay Nanocomposites by Melt Compounding
- PPS News
- PPS News
- Seikei-Kakou Abstracts
- Seikei-Kakou Abstracts
Articles in the same Issue
- Contents
- Contents
- Regular Contributed Articles
- The Dynamic Apparent Viscosity of Polymer Melts During Pulsatile Extrusion Flow with Vibration Force Field
- Generation of Microcellular Foams by Supercritical Carbon Dioxidein a PMMA Compound
- Influence of Uniaxial Extension on the Mechanical Properties of PET and PEN Films
- Analysis of the Isothermal Compression in Nanoimprint Lithography Assuming a Power-Law Fluid
- Non-Isothermal Simulation of the Film Blowing Process Using Multi-Mode Extended Pom-Pom Model
- Flow Analysis of Flat Spiral Dies and Comparison with Cylindrical Spiral Mandrel Dies
- Development of Polymer Blend Morphology along an Extruder with Different Screw Geometries
- A Mechanical Model for Stress Developmentin PA12 Tube Extrusion
- Shrinkage Analysis on Convex Shellby Injection Molding
- Melting Mechanism of Thermoplastic Elastomers and Comparison to Polyolefin Thermoplastic Melting Studies in a Single Screw Extruder
- Thermal Degradation of Meta- and Para-Aramid Fibers in Different Atmospheres
- Experimental Studies on Screw Characteristics in Closely Intermeshing Counter-rotating Twin Screw Extruder
- Experimental Analysis of Heat Transfer in Rotational Molding Process
- Polyetheretherketone Films with Low Thermal Expansion for Flexible Printed Circuit Boards
- Experimental Study and Modeling of Flow Behavior and Orientation Kinetics of Layered Silicate/Polypropylene Nanocomposites in Start-up of Shear Flows
- Polystyrene/Phosphonium Organoclay Nanocomposites by Melt Compounding
- PPS News
- PPS News
- Seikei-Kakou Abstracts
- Seikei-Kakou Abstracts
