Startseite Experimental Investigation of the Development of Interfacial Instabilities in Two Layer Coextrusion Dies
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Experimental Investigation of the Development of Interfacial Instabilities in Two Layer Coextrusion Dies

  • R. Valette , P. Laure , Y. Demay und J.-F. Agassant
Veröffentlicht/Copyright: 2. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 19 Heft 2

Abstract

The stability of two-layer flow of polyethylene and polystyrene is experimentally studied in different flow geometries and for various flow rate ratios. A first coextrusion device allows to stop the coextrusion flow in a very long slit channel, to cool down the polymer sample and to dismantle the die in order to extract extrudate which is then carefully analyzed.

A second device allows to observe the whole slit flow through transparent lateral walls and to record the interfacial waves in both spontaneous and controlled unstable conditions.

Both devices point clearly out that the interfacial defect begins to grow after a specific flow distance and is then quickly amplified. This demonstrates the convective character of interfacial wave. Controlled unstable processing conditions in transparent die allow to measure accurately growth rate of defect in the linear regime and show quick occurrence of non linear regime.

∗ Mail address: R. Valette, Centre de Mise Forme des Matériaux, Ecole Nationale Supérieure des Mines de Paris-UMR 7635 CNRS, 06904 Sophia Antipolis, France E-mail:

References

1 Chen, K. P.: J. Non-Newtonian Fluid Mech.40, p. 155 (1991).10.1016/0377-0257(91)85011-7Suche in Google Scholar

2 Joseph, D. D., Renardy, Y.: Springer, Berlin (1992).Suche in Google Scholar

3 Su, Y. Y., Khomami, B.: J. Rheol.36, p. 357 (1992).10.1122/1.550349Suche in Google Scholar

4 Su, Y. Y., Khomami, B.: Rheol. Acta31, p. 413 (1992).10.1007/BF00701121Suche in Google Scholar

5 Laure, P., Le MeurH., DemayY., Saut, J. C., Scotto, S.: J. Non-Newtonian Fluid Mech.71, p. 1 (1997).10.1016/S0377-0257(97)00011-6Suche in Google Scholar

6 Han, C. D., Shetty, R.: Polym. Eng. Sci.16, p. 697 (1976).10.1002/pen.760161008Suche in Google Scholar

7 Han, C. D., Shetty, R.: Polym. Eng. Sci.18, p. 180 (1978).10.1002/pen.760180303Suche in Google Scholar

8 Han, C. D., Kim, Y. J., Chin, H. B.: Polymer Engineering Reviews, 4, p. 177 (1984).Suche in Google Scholar

9 Anturkar, N. R., Papanastasiou, T. C., Wilkes, J. O.: Polym. Eng. Sci.33, p. 1532 (1993).10.1002/pen.760332304Suche in Google Scholar

10 Wilson, G. M., Khomami, B.: J. Non-Newtonian Fluid Mech.45, p. 355 (1992).10.1016/0377-0257(92)80068-9Suche in Google Scholar

11 Wilson, G. M., Khomami, B.: J. Rheol.37, p. 315 (1993).10.1122/1.550445Suche in Google Scholar

12 Wilson, G. M., Khomami, B.: J. Rheol.37, p. 341 (1993).10.1122/1.550446Suche in Google Scholar

13 Khomami, B., Ranjbaran, M. M.: Rheol. Acta36, p. 345 (1997).10.1007/BF00396323Suche in Google Scholar

14 Khomami, B., Su, K. C.: J. Non-Newtonian Fluid Mech.91, p. 59 (2000).10.1016/S0377-0257(99)00086-5Suche in Google Scholar

15 Valette, R., Laure, P., Demay, Y., Agassant, J.-F.: Int. Polym. Process.18, p. 171 (2003).10.3139/217.1731Suche in Google Scholar

16 Mauffrey, J.: PhD thesis, Ecole Nationale Supérieure des Mines de Paris (2000).Suche in Google Scholar

Received: 2003-10-6
Accepted: 2004-2-5
Published Online: 2013-05-02
Published in Print: 2004-05-01

© 2004, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. DuPont, IG Farbenindustrie, ICI and Japanese PA Fiber Manufacturers Polyamides 66 and 6
  5. Screw Extrusion
  6. Modeling the Flow in the Metering Zone of Single Screw Extruders Using a Helical Geometry Model
  7. Engineering Analysis of Devolatilization of Various Additives in Intermeshing Co-rotating Twin Screw Extruders
  8. Die Extrusion
  9. Novel Extrusion Dies with Rotating Rollers for CO2-Plastic Foam Production
  10. Experimental Investigation of the Development of Interfacial Instabilities in Two Layer Coextrusion Dies
  11. Detachment of the Polymer Melt from the Roll Surface: Calendering Analysis and Data from a Shear Roll Extruder
  12. Reactive Extrusion
  13. Reactive Extrusion of SAN/EPDM Blends
  14. Film
  15. Easy Tear Film of Biaxially Oriented PA 6/MXD 6 Blend by Double Bubble Tubular Film Process
  16. Deformation Behavior, Processability and Physical Properties for Biaxially Oriented Film of LLDPE
  17. Stretchability and Properties of LLDPE Blends for Biaxially Oriented Film
  18. Stretchability and Properties of Various LLDPE for Biaxially Oriented Film
  19. Molding
  20. Microinjection Molding with LIGA-Like Process
  21. Thermoforming
  22. On the Use of the Heating Stage to Control the Thickness Distribution in Thermoformed Parts
  23. PPS News
  24. PPS News
https://doi.org/10.3139/217.1819

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. DuPont, IG Farbenindustrie, ICI and Japanese PA Fiber Manufacturers Polyamides 66 and 6
  5. Screw Extrusion
  6. Modeling the Flow in the Metering Zone of Single Screw Extruders Using a Helical Geometry Model
  7. Engineering Analysis of Devolatilization of Various Additives in Intermeshing Co-rotating Twin Screw Extruders
  8. Die Extrusion
  9. Novel Extrusion Dies with Rotating Rollers for CO2-Plastic Foam Production
  10. Experimental Investigation of the Development of Interfacial Instabilities in Two Layer Coextrusion Dies
  11. Detachment of the Polymer Melt from the Roll Surface: Calendering Analysis and Data from a Shear Roll Extruder
  12. Reactive Extrusion
  13. Reactive Extrusion of SAN/EPDM Blends
  14. Film
  15. Easy Tear Film of Biaxially Oriented PA 6/MXD 6 Blend by Double Bubble Tubular Film Process
  16. Deformation Behavior, Processability and Physical Properties for Biaxially Oriented Film of LLDPE
  17. Stretchability and Properties of LLDPE Blends for Biaxially Oriented Film
  18. Stretchability and Properties of Various LLDPE for Biaxially Oriented Film
  19. Molding
  20. Microinjection Molding with LIGA-Like Process
  21. Thermoforming
  22. On the Use of the Heating Stage to Control the Thickness Distribution in Thermoformed Parts
  23. PPS News
  24. PPS News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 3.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.1819/html?lang=de
Button zum nach oben scrollen