PPS News

Artikel in diesem Heft

1. Contents
2. Contents
3. Editorial
4. DuPont, IG Farbenindustrie, ICI and Japanese PA Fiber Manufacturers Polyamides 66 and 6
5. Screw Extrusion
6. Modeling the Flow in the Metering Zone of Single Screw Extruders Using a Helical Geometry Model
7. Engineering Analysis of Devolatilization of Various Additives in Intermeshing Co-rotating Twin Screw Extruders
8. Die Extrusion
9. Novel Extrusion Dies with Rotating Rollers for CO₂-Plastic Foam Production
10. Experimental Investigation of the Development of Interfacial Instabilities in Two Layer Coextrusion Dies
11. Detachment of the Polymer Melt from the Roll Surface: Calendering Analysis and Data from a Shear Roll Extruder
12. Reactive Extrusion
13. Reactive Extrusion of SAN/EPDM Blends
14. Film
15. Easy Tear Film of Biaxially Oriented PA 6/MXD 6 Blend by Double Bubble Tubular Film Process
16. Deformation Behavior, Processability and Physical Properties for Biaxially Oriented Film of LLDPE
17. Stretchability and Properties of LLDPE Blends for Biaxially Oriented Film
18. Stretchability and Properties of Various LLDPE for Biaxially Oriented Film
19. Molding
20. Microinjection Molding with LIGA-Like Process
21. Thermoforming
22. On the Use of the Heating Stage to Control the Thickness Distribution in Thermoformed Parts
23. PPS News
24. PPS News