Contents

Artikel in diesem Heft

1. Contents
2. Contents
3. Editorial
4. Editorial
5. Invited Papers
6. Effects of a Multifunctional Polymeric Chain Extender on the Properties of Polylactide and Polylactide/Clay Nanocomposites
7. Influence of Twin-Screw Processing Conditions on Structure and Properties of Polypropylene – Organoclay Nanocomposites
8. Monitoring the Production of Polymer Nanocomposites by Melt Compounding with On-line Rheometry
9. Annular Extrudate Swell of a Fluoropolymer Melt
10. Injection Molding of Fibre Reinforced Thermoplastics: Integration of Fibre Orientation and Mechanical Properties Computations
11. Processing of Polymer Nanocomposites Reinforced with Cellulose Nanocrystals: A Challenge
12. Structure, Mechanical and Barrier Properties of Uniaxially Stretched Multilayer Nylon/Clay Nanocomposite Films
13. Characterization of Thermoplastic Laser-welded Joints
14. Regular Contributed Articles
15. Residual Wall Thickness Study of Variable Cross-section Tube in Water-assisted Injection Molding
16. Design and Validation of a Cable Extrusion Tip with Spiral Channels
17. Water Penetration Behavior in Water-assisted Injection Molding (WAIM): A Study of Product Quality for Different Process and Material Parameters
18. Effect of Prepolymerization Time on Morphology and Properties of Epoxy-modified Bismaleimide Foams
19. Rapid Communications
20. Mechanical Properties and Fracture Morphology of Blends of PC with PMMA
21. PPS-News
22. PPS News
23. Seikei Kakou Abstracts
24. Seikei-Kakou Abstracts