Article
Licensed
Unlicensed Requires Authentication

Editorial

Published/Copyright: April 6, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 27 Issue 5

Published Online: 2013-04-06
Published in Print: 2012-11-01

© 2012, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial
  5. Invited Papers
  6. Effects of a Multifunctional Polymeric Chain Extender on the Properties of Polylactide and Polylactide/Clay Nanocomposites
  7. Influence of Twin-Screw Processing Conditions on Structure and Properties of Polypropylene – Organoclay Nanocomposites
  8. Monitoring the Production of Polymer Nanocomposites by Melt Compounding with On-line Rheometry
  9. Annular Extrudate Swell of a Fluoropolymer Melt
  10. Injection Molding of Fibre Reinforced Thermoplastics: Integration of Fibre Orientation and Mechanical Properties Computations
  11. Processing of Polymer Nanocomposites Reinforced with Cellulose Nanocrystals: A Challenge
  12. Structure, Mechanical and Barrier Properties of Uniaxially Stretched Multilayer Nylon/Clay Nanocomposite Films
  13. Characterization of Thermoplastic Laser-welded Joints
  14. Regular Contributed Articles
  15. Residual Wall Thickness Study of Variable Cross-section Tube in Water-assisted Injection Molding
  16. Design and Validation of a Cable Extrusion Tip with Spiral Channels
  17. Water Penetration Behavior in Water-assisted Injection Molding (WAIM): A Study of Product Quality for Different Process and Material Parameters
  18. Effect of Prepolymerization Time on Morphology and Properties of Epoxy-modified Bismaleimide Foams
  19. Rapid Communications
  20. Mechanical Properties and Fracture Morphology of Blends of PC with PMMA
  21. PPS-News
  22. PPS News
  23. Seikei Kakou Abstracts
  24. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.1251

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial
  5. Invited Papers
  6. Effects of a Multifunctional Polymeric Chain Extender on the Properties of Polylactide and Polylactide/Clay Nanocomposites
  7. Influence of Twin-Screw Processing Conditions on Structure and Properties of Polypropylene – Organoclay Nanocomposites
  8. Monitoring the Production of Polymer Nanocomposites by Melt Compounding with On-line Rheometry
  9. Annular Extrudate Swell of a Fluoropolymer Melt
  10. Injection Molding of Fibre Reinforced Thermoplastics: Integration of Fibre Orientation and Mechanical Properties Computations
  11. Processing of Polymer Nanocomposites Reinforced with Cellulose Nanocrystals: A Challenge
  12. Structure, Mechanical and Barrier Properties of Uniaxially Stretched Multilayer Nylon/Clay Nanocomposite Films
  13. Characterization of Thermoplastic Laser-welded Joints
  14. Regular Contributed Articles
  15. Residual Wall Thickness Study of Variable Cross-section Tube in Water-assisted Injection Molding
  16. Design and Validation of a Cable Extrusion Tip with Spiral Channels
  17. Water Penetration Behavior in Water-assisted Injection Molding (WAIM): A Study of Product Quality for Different Process and Material Parameters
  18. Effect of Prepolymerization Time on Morphology and Properties of Epoxy-modified Bismaleimide Foams
  19. Rapid Communications
  20. Mechanical Properties and Fracture Morphology of Blends of PC with PMMA
  21. PPS-News
  22. PPS News
  23. Seikei Kakou Abstracts
  24. Seikei-Kakou Abstracts
Downloaded on 2.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.1251/html
Scroll to top button