PPS News

Articles in the same Issue

1. Contents
2. Contents
3. Review Article
4. Fluid-Powered Projectile-Assisted Injection Molding: Principles and Developments
5. Regular Contributed Articles
6. Correlations between the Hysteresis Parameters Determining the Rolling Resistance in Rubber Composites
7. Global Modeling for Single Screw Extrusion of Viscoplastics
8. Enhanced Dispersive Mixing in Twin-Screw Extrusion via Extension-Dominated Static Mixing Elements of Varying Contraction Ratios
9. EPDM-G-GMA Toughening of Straw/Polypropylene Composites: Mechanical Properties, Thermal Stability and Rheological Properties
10. In Situ Assembly of LDPE/PA6 Multilayer Structure by Stirring
11. Modeling and Estimation of the Pressure and Temperature dependent Bulk Density of Polymers
12. Influence of ABS Type and Compatibilizer on the Thermal and Mechanical Properties of PC/ABS Blends
13. Analysis of Self-Reinforced Mechanism of Over-Molding Polypropylene Parts
14. Grafting of Biodegradable Polyesters on Cellulose for Biocomposites: Characterization and Biodegradation
15. PPS News
16. PPS News