Contents

Artikel in diesem Heft

1. Contents
2. Contents
3. Regular Contributed Articles
4. Use of the Taguchi Method for Optimization of Poly (Butylene Terephthalate) and Poly (Trimethylene Terephthalate) Blends through Injection Molding
5. CFD Analysis of the Frame Invariance of the Melt Temperature Rise in a Single-screw Extruder
6. Simulation Study of Thermotropic LCPs and Prediction of Normal Stress Difference at High Shear Rate
7. Study on Mechanical, Thermal Properties and Morphology of Biodegradable Poly(butylene succinate)/Nano-TiO₂ Composites
8. Preparation and Characterization of Bamboo Fibers Coated with Titanium Urushiol and its Composite Materials with Polypropylene
9. Effect of the Mandrel Rotation Speed and Inner Wall Cooling Rate on the Performance and Structure of Polypropylene Block-Copolymer Pipe
10. Modification of Liquid Oxygen Compatibility of Bisphenol F Epoxy Resin
11. Pressure Variation during Interfacial Instability in the Coextrusion of Low Density Polyethylene Melts
12. The Effects of Processing Parameters on the Residual Wall Thickness Distribution at the Sharp Angle Corner of Water Assisted Injection Molded Parts
13. The Influence of Extrusion Conditions on Mechanical and Thermal Properties of Virgin and Recycled PP, HIPS, ABS and Their Ternary Blends
14. Influence of Mold Temperature on Mold Filling Behavior and Part Properties in Micro Injection Molding
15. On the Pressure Dependency of the Bagley Correction
16. PPS News
17. PPS News
18. Seikei Kakou Abstracts
19. Seikei-Kakou Abstracts