Influence of Mold Temperature on Mold Filling Behavior and Part Properties in Micro Injection Molding

References

Angelov, A. K., Coulter, J. P., “Micromolding Product Manufacture: A Progress Report”, SPE ANTEC Tech. Papers, 748–751 (2004)Suche in Google Scholar

Bibber, D. M., “Micro Molding Challenges”, SPE ANTEC Tech. Papers, 3703–3711 (2004)Suche in Google Scholar

Chen, S.-C., Peng, H.-S., Huang, L.-T. and Chung, M.-S., “Investigations of the Tensile Properties on Polycarbonate Thin-wall Injection Molded Parts”, J. Reinf. Plast. Compos., 22, 479–494 (2003) 10.1106/073168403023289Suche in Google Scholar

Chu, J. S., Kamal, M. R., Salim, D. and Hrymak, A., “Characterization of the Microinjection Molding Process”, Polym. Eng. Sci., 50, 1214–1225 (2010) 10.1002/pen.21632Suche in Google Scholar

Chu, J. S., Kamal, M. R., Salim, D. and Hrymak, A., “Morphology Development in the Gate Region of Micro Injection Molded Thermoplastics”, Polym. Eng. Sci., 52, 787–794 (2012) 10.1002/pen.22143  Suche in Google Scholar

Drummer, D., Gruber, K. and Meister, S., “Alternating Temperature Technology Controls Parts Properties”, Kunstst. Int., 101, 25–27 (2011)Suche in Google Scholar

Drummer, D., Ehrenstein, G. W., Hopmann, C., Vetter, K., Meister, S., Fischer, T., Piotter, V. and Prokop, J., “Innovative Process Technologies for Manufacturing Thermoplastic Micro Parts – Analysis and Comparative Assessment”, J. Plast. Technol., 8, 440–467 (2012)Suche in Google Scholar

Ehrenstein, G. W., Riedel, G. and Trawiel, P.: Thermal Analysis of Plastics: Theory and Practice, 2^nd Edition, Hanser, Munich (2004) 10.3139/9783446434141Suche in Google Scholar

Fassett, J., “Thin Wall molding: Differences in Processing over Standard Injection Molding”, SPE ANTEC, Tech. Papers, 430–433 (1995)Suche in Google Scholar

Giboz, J., Copponex, T. and Méle, P., “Microinjection Molding of Thermoplastic Polymers: A Review”, J. Micromech. Microeng., 19, 1–12 (2009) 10.1088/0960-1317/19/2/025023Suche in Google Scholar

Giessauf, J., Pillwein, G. and Steinbichler, G., “Variotherm Temperature Control Is Fit for Production”, Kunstst. Int., 98, 57–62 (2008)Suche in Google Scholar

Haberstroh, E., Brandt, M., “Determination of Mechanical Properties of Thermoplastics Suitable for Micro Systems”, J. Marcromol. Mater. Eng., 12, 881–888 (2002) 10.1002/mame.200290023Suche in Google Scholar

Jungmeier, A., Ehrenstein, G. W. and Drummer, D., “New Aspects of Process Induced Properties of Microinjection Molded Parts”, Plast. Rubber Compos., 39, 308–314 (2010) 10.1179/174328910X12691245470392Suche in Google Scholar

Jungmeier, A., “Structure and Properties of Injection Molded Thermoplastic Micro Parts”, Ph.D. Thesis, University Erlangen-Nuremberg, Erlangen (2010)Suche in Google Scholar

Kohan, M. I.: Nylon Plastics Handbook, Hanser, Munich (1995)Suche in Google Scholar

Lurz, A., Schmachtenberg, E., “Influences on the Properties of Small and Thin-walled Injection Molded Parts – Part 2: Importance of the Thermal Conductivity of the Mold Material”, J. Plast. Technol., 4, 1–18 (2008)Suche in Google Scholar

Martyn, M. T., Whiteside, B. W., Coates, P. D., Allen, P., Greenway, G. and Hornsby, P., “Aspects of MicroMolding Polymers for Medical Applications”, SPE ANTEC Tech. Papers, 3698–3702 (2004)Suche in Google Scholar

Meister, S., Jungmeier, A. and Drummer, D., “Long Term Properties of Injection Molded Micro-Parts: Influence of Part Dimensions and Cooling Conditions on Ageing Behavior”, Macromol. Mater. Eng., 297, 994–1004 (2012), 10.1002/mame.201100379Suche in Google Scholar

Meister, S., Vetter, K., Ehrenstein, G. W. and Drummer, D., “Measurement of Mechanical Material Properties For Micro Parts On Injection Molded Micro Tensile Bars”, J. Plast. Technol., 9, 74–99 (2013a)Suche in Google Scholar

Meister, S., Drummer, D., “Influence of Manufacturing Conditions on Measurement of Mechanical Material Properties on Thermoplastic Micro Tensile Bars”, Polym. Test., 32, 432–437 (2013b) 10.1016/j.polymertesting.2012.12.006Suche in Google Scholar

Nguyen-Chung, T., Loeser, C., Juettner, G., Obadal, M., Pham, T. and Gehde, M., “Morphology Analysis of Injection Molded Micro Parts”, J. Plast. Technol., 7, 86–114 (2011)Suche in Google Scholar

N.N.: “Integrierte Intelligenz – Perspektiven der Mikrosystemtechnik”, Leaflet, Federal Ministry of Education and Research, Bonn (2010)Suche in Google Scholar

Pfirrmann, O., Astor, M., “Trendreport Mikrosystemtechnik – Innovative Ideen rund um die Mikrosystemtechnik”, Prognos AG, Basel (2006)Suche in Google Scholar

Rudolph, N. M., Osswald, T. A. and Ehrenstein, G. W., “Influence of Pressure on Volume, Temperature and Crystallization of Thermoplastics during Polymer Processing”, Int. Polym. Proc., 26, 239–248 (2011) 10.3139/217.2417Suche in Google Scholar

Schmiederer, D., Schmachtenberg, E., “Einfluesse auf die Eigenschaften kleiner und duennwandiger Spritzgussteile”, J. Plast. Technol., 5, 1–22 (2006)Suche in Google Scholar

Schnieders, J., “Analyse der Fertigungs- und Prozesseinfluesse auf die Spannungsrissbildung beim Fügen amorpher Thermoplaste mittels Heizelement”, Ph.D. Thesis, University Paderborn (2004)Suche in Google Scholar

Starkweather, H. W., Moore, G. E., Hansen, J. E., Roder, T. M. and Brooks, R. E., “Effect of Crystallinity on the Properties of Nylons”, J. Polym. Sci., 21, 189–204 (1956) 10.1002/pol.1956.120219803Suche in Google Scholar

Starkweather, H. W., Brooks, R. E., “Effect of Spherulites on the Mechanical Properties of Nylon 66”, J. Appl. Polym. Sci., 1, 236–239 (1959) 10.1002/app.1959.070010214Suche in Google Scholar

Tom, A. M., Layser, G. S. and Coulter, J. P., “Mechanical Property Determination of Micro Injection Molded Tensile Test Specimens”, SPE ANTEC Tech. Papers, 2541–2545 (2006)Suche in Google Scholar

Walter, T., Schinkoethe, W., Ehrfeld, W., Schaumburg, C. and Weber, L., “Injection molding of Microstructures with Inductive Mold Heating”, Proceedings 16. Stuttgarter Kunststoff-Kolloquium, Stuttgart, 1–10 (1999)Suche in Google Scholar

Wübken, G., “Einfluss der Verarbeitungsbedingungen auf die innere Struktur thermoplastischer Spritzgussteile unter besonderer Beruecksichtigung der Abkuehlverhaeltnisse.”, Ph.D. Thesis, RWTH Aachen (1974)Suche in Google Scholar

Zhu, P., Tung, J., Phillips, A. and Edward, G., “Morphological Development of Oriented Isotactic Polypropylene in the Presence of a Nucleating Agent”, Macromolecules, 39, 1821–1831 (2006) 10.1021/ma052375gSuche in Google Scholar