Startseite Effect of powder morphology on the microstructure and properties of cold sprayed Ni coatings
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of powder morphology on the microstructure and properties of cold sprayed Ni coatings

  • A. Góral , W. Żórawski , P. Czaja , L. Lityńska-Dobrzyńska , M. Makrenek und S. Kowalski
Veröffentlicht/Copyright: 11. Januar 2019
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 110 Heft 1

Abstract

Cold sprayed Ni coatings offer new possibilities for repairing damaged and mis-machined components. The morphology of the powder particles and grain-size distribution have a significant influence on the particles' behaviour during compaction and on the properties of the coating. In this study, two Ni powders with different morphology and grain-size distribution were cold sprayed on a 7075 Al alloy substrate. The first powder, Ni HR, had an irregular spherical shape, whereas the second, Ni E, possessed a dendritic shape. SEM and TEM investigations revealed differences in the microstructure and properties of the Ni cold-sprayed coatings. The coating sprayed using the dendritic powder revealed enhanced mechanical properties and the surface had half the roughness of the Ni coatings deposited using the irregular spheroidal powder.

Keywords: Ni coating; Cold spraying; Microstructure; Surface topography
*Correspondence address, Anna Góral, Ph.D., Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 25 Reymonta St., 30-059 Kraków, Poland, Tel.: +48122952868, Fax: +48122952804, E-mail: , Web: www.imim.pl

References

[1] V.K.Champagne, in: The cold spray materials deposition process. Fundamentals and applications. V.K.Champagne (Ed.), Woodhead Publishing Limited, Cambridge2007, England, 1–10. 10.1533/9781845693787Suche in Google Scholar

[2] A.Bonadei, T.Marrocco: Surf. Coat. Technol.242 (2014) 200–206. 10.1016/j.surfcoat.2013.08.019Suche in Google Scholar

[3] J.R.Davis (Ed), Handbook of Thermal Spray Technology, ASM International, Materials Park, Ohio, 2004. ISBN 0-87170-795-0.Suche in Google Scholar

[4] L.Pawlowski: The science and engineering of thermal spray coatings, John Wiley and Sons, Chichester, 2008. ISBN 9780471490494. 10.1002/9780470754085Suche in Google Scholar

[5] W.Żórawski, A.Góral, O.Bokuvka, L.Lityńska-Dobrzyńska, K.Berent: Surf. Coat. Technol.268 (2015) 190–197. 10.1016/j.surfcoat.2014.09.014Suche in Google Scholar

[6] W.Żórawski, M.Makrenek, A.Góral: Arch. Metall. Mater.61 (2016) 1839–1846. 10.1515/amm-2016-0297Suche in Google Scholar

[7] A.Papyrin, in: The cold spray materials deposition process. Fundamentals and applications. V.K.Champagne (Ed.), Woodhead Publishing Limited, Cambridge2007, England, 11–42. 10.1533/9781845693787Suche in Google Scholar

[8] M.F.Smith, in: The cold spray materials deposition process. Fundamentals and applications. V.K.Champagne (Ed.), Woodhead Publishing Limited, Cambridge2007, England, 43–61. 10.1533/9781845693787Suche in Google Scholar

[9] J.Karthikeyan, in: The cold spray materials deposition process. Fundamentals and applications. V.K.Champagne (Ed.), Woodhead Publishing Limited, Cambridge2007, England, 62–72. 10.1533/9781845693787Suche in Google Scholar

[10] H.Koivuluoto, A.Milanti, G.Bolelli, L.Lusvarghi, P.Vuoristo: J. Therm. Spray Technol.23 (2014) 98–103. 10.1007/s11666-013-0016-7Suche in Google Scholar

[11] H.Koivuluoto, G.Bolelli, A.Milanti, L.Lusvarghi, P.Vuoristo: Surf. Coat. Technol.268 (2015) 224–229. 10.1016/j.surfcoat.2014.09.007Suche in Google Scholar

[12] F.Stott, D.Lin, G.Wood: Corros. Sci.13 (1973) 449–469. 10.1016/0010-938X(73)90030-9Suche in Google Scholar

[13] L.Ajdelsztajn, B.Jodoin, J.M.Schoenung: Surf. Coat. Technol.201 (2006) 1166–1172. 10.1016/j.surfcoat.2006.01.037Suche in Google Scholar

[14] P.Cavaliere, A.Perrone, A.Silvello: J. Therm. Spray Technol.25(6) (2016) 1158–1167. 10.1007/s11666-016-0430-8Suche in Google Scholar

[15] J.Banhart: Prog. Mater. Sci.46 (2001) 559–632. 10.1016/S0079-6425(00)00002-5Suche in Google Scholar

[16] X-T.Luo, Y-J.Li, C-J.Li: Mater. Lett.163 (2016) 58–60. 10.1016/j.matlet.2015.10.048Suche in Google Scholar

[17] F.Ntuli, A.E.Lewisa: Chem. Eng. Sci.64 (2009) 2202–2215. 10.1016/j.ces.2009.01.026Suche in Google Scholar

[18] G.Bae, K.Kang, C.Lee: Mater. Lett.89 (2012) 320–323. 10.1016/j.matlet.2012.08.133Suche in Google Scholar

[19] ISO 25178-2:2012 Geometrical product specifications (GPS) – Surface texture: Areal – Part 2: Terms, definitions and surface texture parameters.Suche in Google Scholar

[20] A.Leyland, A.Matthews: Wear246 (2000) 1–11. 10.1016/S0043-1648(00)00488-9Suche in Google Scholar

[21] SYin, Y.Xie, X.Suo, H.Liao, X.Wang: Mater. Lett.138 (2015) 143–147. 10.1016/j.matlet.2014.10.016Suche in Google Scholar

[22] T.Hussain, D.G.McCartney, P.H.Shipway, D.Zhang: J. Therm. Spray Technol.18 (2009) 364–379. 10.1007/s11666-009-9298-1Suche in Google Scholar

[23] C.Lee, J.Kim: J. Therm. Spray Technol.24 (2015) 592–610. 10.1007/s11666-015-0223-5Suche in Google Scholar

[24] M.Grujicic, in: The cold spray materials deposition process. Fundamentals and applications. V.K.Champagne (Ed.), Woodhead Publishing Limited, Cambridge2007, England, 148–177. 10.1533/9781845693787Suche in Google Scholar

[25] P.C.King, S.H.Zahiri, M.Jahedi: Metall. Mater. Trans. A40 (2009) 2115–2123. 10.1007/s11661-009-9882-5Suche in Google Scholar

[26] M.A.Meyers, Y.B.Xu, Q.Xue, M.T.Perez-Prado, T.R.McNelley: Acta Mater.51 (2003) 1307–1325. 10.1016/S1359-6454(02)00526-8Suche in Google Scholar

[27] S.Nakahara: J. Cryst. Growth55 (1981) 281–290. 10.1016/0022-0248(81)90026-9Suche in Google Scholar

[28] A.Góral: Surf. Coat. Technol.319 (2017) 23–32. 10.1016/j.surfcoat.2017.03.061Suche in Google Scholar

[29] L.Ajdelsztajn, A.P.Zuniga, B.Jodoin, E.J.Lavernia: Surf. Coat. Technol.201 (2006) 2109–2116. 10.1016/j.surfcoat.2005.06.001Suche in Google Scholar

[30] M.Grujicic, J.R.Saylor, D.E.Beasley, W.S.DeRosset, D.Helfritch: Appl. Surf. Sci.219 (2003) 211–227. 10.1016/S0169-4332(03)00643-3Suche in Google Scholar

[31] A.Góral, L.Lityńska-Dobrzyńska, M.Kot: J. Mater. Eng. Perform.25 (2017) 2118–2128. 10.1007/s11665-017-2662-2Suche in Google Scholar

[32] R.Mishra, B.Basu, R.Balasubramaniam: Mater. Sci. Eng. A373 (2004) 370–373. 10.1016/j.msea.2003.09.107Suche in Google Scholar

Received: 2017-11-13
Accepted: 2018-06-06
Published Online: 2019-01-11
Published in Print: 2019-01-09

© 2019, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. XVI International Conference on Electron Microscopy
  5. Original Contributions
  6. Application of analytical electron microscopy and FIB-SEM tomographic technique for phase analysis in as-cast Allvac 718Plus superalloy
  7. Microstructure and properties of laser interference crystallized amorphous FeSiB ribbon
  8. Analysis of amorphous regions in severely marformed NiTi shape memory alloy
  9. Structure of MgLiAl alloys after various routes of severe plastic deformation studied by TEM
  10. Microstructure and selected mechanical and electrical property analysis of Sr-doped LaCoO3 perovskite thin films deposited by the PLD technique
  11. Microstructure of an oxide scale formed on ATI 718Plus superalloy during oxidation at 850 °C characterised using analytical electron microscopy
  12. Effect of powder morphology on the microstructure and properties of cold sprayed Ni coatings
  13. Microstructure of Ti/Al multilayer foils ignited with electric current
  14. Evolution of γ′ morphology and γ/γ′ lattice parameter misfit in a nickel-based superalloy during non-equilibrium cooling
  15. Effect of heat treatment on the precipitation hardening in FeNiCoAlTaB shape memory alloys
  16. The structure and formation mechanism of FeS2/Fe3S4/S8 nanocomposite synthesized using spherical shaped Fe3O4 nanoparticles as the precursor
  17. Short Communications
  18. Characterization of Inconel 625 surface layer modified by laser shock processing
  19. DGM News
  20. DGM News
https://doi.org/10.3139/146.111698
Schlagwörter für diesen Artikel
Ni coating; Cold spraying; Microstructure; Surface topography

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. XVI International Conference on Electron Microscopy
  5. Original Contributions
  6. Application of analytical electron microscopy and FIB-SEM tomographic technique for phase analysis in as-cast Allvac 718Plus superalloy
  7. Microstructure and properties of laser interference crystallized amorphous FeSiB ribbon
  8. Analysis of amorphous regions in severely marformed NiTi shape memory alloy
  9. Structure of MgLiAl alloys after various routes of severe plastic deformation studied by TEM
  10. Microstructure and selected mechanical and electrical property analysis of Sr-doped LaCoO3 perovskite thin films deposited by the PLD technique
  11. Microstructure of an oxide scale formed on ATI 718Plus superalloy during oxidation at 850 °C characterised using analytical electron microscopy
  12. Effect of powder morphology on the microstructure and properties of cold sprayed Ni coatings
  13. Microstructure of Ti/Al multilayer foils ignited with electric current
  14. Evolution of γ′ morphology and γ/γ′ lattice parameter misfit in a nickel-based superalloy during non-equilibrium cooling
  15. Effect of heat treatment on the precipitation hardening in FeNiCoAlTaB shape memory alloys
  16. The structure and formation mechanism of FeS2/Fe3S4/S8 nanocomposite synthesized using spherical shaped Fe3O4 nanoparticles as the precursor
  17. Short Communications
  18. Characterization of Inconel 625 surface layer modified by laser shock processing
  19. DGM News
  20. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 3.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111698/html
Button zum nach oben scrollen