Startseite Technik A general method towards transition metal monoboride nanopowders
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

A general method towards transition metal monoboride nanopowders

  • Weixiao Cao , Ya'nan Wei , Xin Meng , Yuexia Ji und Songlin Ran
Veröffentlicht/Copyright: 31. März 2017
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 108 Heft 4

Abstract

The borothermal reduction of metal oxides in molten salts is reported as a general method towards transition metal monoboride nanopowders. Crystallized CrB powders with average particle sizes of 40 – 50 nm were synthesized at a lowest temperature of 800 °C. The presence of molten salts greatly inhibited the formation of impurities and the grain growth of CrB particles. NbB and TaB powders were also successfully synthesized by the same method at 1 000 °C and 1 100 °C, respectively.

Keywords: Metal monoboride; Borothermal reduction; Molten salt method
*Correspondence address, Dr. Songlin Ran, School of Materials Science and Engineering, Anhui University of Technology, 59 Hudong Road, Ma'anshan 243002, P. R. China, Tel.: +86 555 2311870, Fax: +86 555 2311570, E-mail:

References

[1] W.G.Fahrenholtz, J.Binner, J.Zou: J. Mater. Res.31 (2016) 2757. 10.1557/jmr.2016.210Suche in Google Scholar

[2] W.G.Fahrenholtz, G.E.Hilmas, I.G.Talmy, J.A.Zaykoski: J. Am. Ceram. Soc.90 (2007) 1347. 10.1111/j.1551-2916.2007.01583.xSuche in Google Scholar

[3] J.Zou, J.Liu, G.-J.Zhang, S.Huang, J.Vleugels, O.Van der Biest, J.Z.Shen: Acta Mater.72 (2014) 167. 10.1016/j.actamat.2014.03.054Suche in Google Scholar

[4] J.Zou, J.Liu, J.Zhao, G.-J.Zhang, S.Huang, B.Qian, J.Vleugels, O.Van der Biest, J.Z.Shen: Chem. Eng. J.249 (2014) 93. 10.1016/j.cej.2014.03.089Suche in Google Scholar

[5] B.Huang, Y.-H.Duan, W.-C.Hu, Y.Sun, S.Chen: Ceram. Int.41 (2015) 6831. 10.1016/j.ceramint.2015.01.132Suche in Google Scholar

[6] L.Han, S.Wang, J.Zhu, S.Han, W.Li, B.Chen, X.Wang, X.Yu, B.Liu, R.Zhang, Y.Long, J.Cheng, J.Zhang, Y.Zhao, C.Jin: Appl. Phys. Lett.106 (2015) 221902. 10.1063/1.4922147Suche in Google Scholar

[7] R.-Y.Li, Y.-H.Duan: Philos. Mag.96 (2016) 972. 10.1080/14786435.2016.1149247Suche in Google Scholar

[8] J.Zhang, W.Ke, W.Ji, Z.Fan, W.Wang, Z.Fu: Mater. Sci. Eng. A648 (2015) 158. 10.1016/j.msea.2015.09.067Suche in Google Scholar

[9] F.-C.Wang, Z.-H.Zhang, J.Luo, C.-C.Huang, S.-K.Lee: Compos. Sci. Technol.69 (2009) 2682. 10.1016/j.compscitech.2009.08.010Suche in Google Scholar

[10] S.Ran, S.G.Huang, O.Van der Biest, J.Vleugels: J. Eur. Ceram. Soc.32 (2012) 2537. 10.1016/j.jeurceramsoc.2012.02.035Suche in Google Scholar

[11] X.G.Wang, W.M.Guo, Y.M.Kan, G.J.Zhang: Adv. Eng. Mater.12 (2010) 893. 10.1002/adem.201000012Suche in Google Scholar

[12] C.L.Yeh, W.H.Chen: J. Alloys Compd.420 (2006) 111. 10.1016/j.jallcom.2005.10.031Suche in Google Scholar

[13] Y.Hiroki, M.Yoshinaka, K.Hirota, O.Yamaguchi: J. Jpn. Soc. Powder Powder Metall.50 (2003) 367. 10.2497/jjspm.50.367Suche in Google Scholar

[14] C.L.Yeh, H.J.Wang: J. Alloys Compd.509 (2011) 3257. 10.1016/j.jallcom.2010.12.004Suche in Google Scholar

[15] K.Iizumi, K.Kudaka, D.Maezawa, T.Sasaki: J. Ceram. Soc. Jpn.107 (1999) 491. 10.2109/jcersj.107.491Suche in Google Scholar

[16] J.Ma, Y.Gu, L.Shi, L.Chen, Z.Yang, Y.Qian: Chem. Phys. Lett.381 (2003) 194. 10.1016/j.cplett.2003.09.128Suche in Google Scholar

[17] L.Qin, X.Zhang, Y.Liang, E.Zhang, H.Gao, Z.Zhang: J. Mater. Sci.41 (2006) 7617. 10.1007/s10853-006-0853-6Suche in Google Scholar

[18] S.A.Hassanzadeh-Tabrizi, D.Davoodi, A.A.Beykzadeh, S.Salahshour: Ceram. Int.42 (2016) 1812. 10.1016/j.ceramint.2015.09.144Suche in Google Scholar

[19] Menaka, B. Kumar, S.Kumar, A.K.Ganguli: J. Solid State Chem.200 (2013) 117. 10.1016/j.jssc.2013.01.005Suche in Google Scholar

[20] S.Ran, H.Sun, Y.N.Wei, D.Wang, N.Zhou, Q.Huang: J. Am. Ceram. Soc.97 (2014) 3384. 10.1111/jace.13298Suche in Google Scholar

Received: 2016-11-25
Accepted: 2017-01-17
Published Online: 2017-03-31
Published in Print: 2017-04-13

© 2017, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Formation of intermetallic compounds and their effect on mechanical properties of aluminum–titanium alloy films
  5. Microstructure and properties of hot extruded Mg-3Zn-Y-xCu (x = 0, 1, 3, 5) alloys
  6. Effects of rare-earth element addition and heat treatment on the microstructures and mechanical properties of Al-25 % Si alloy
  7. Effects of silicon on characteristics of dynamic strain aging in a near-α titanium alloy
  8. Influence of heat treatment on the structure, hardness and strength of ZnAl40Cu3 alloy
  9. W–Cu composites subjected to heavy hot deformation
  10. Electrochemical performance of CuBi2O4 nanoparticles synthesized via a polyacrylamide gel route
  11. Mechanical properties of nano-SiO2 reinforced 3D glass fiber/epoxy composites
  12. Reinforcement effect and synergy of carbon nanofillers with different dimensions in high density polyethylene based nanocomposites
  13. Short Communications
  14. A general method towards transition metal monoboride nanopowders
  15. DGM News
  16. DGM News
https://doi.org/10.3139/146.111484
Schlagwörter für diesen Artikel
Metal monoboride; Borothermal reduction; Molten salt method

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Formation of intermetallic compounds and their effect on mechanical properties of aluminum–titanium alloy films
  5. Microstructure and properties of hot extruded Mg-3Zn-Y-xCu (x = 0, 1, 3, 5) alloys
  6. Effects of rare-earth element addition and heat treatment on the microstructures and mechanical properties of Al-25 % Si alloy
  7. Effects of silicon on characteristics of dynamic strain aging in a near-α titanium alloy
  8. Influence of heat treatment on the structure, hardness and strength of ZnAl40Cu3 alloy
  9. W–Cu composites subjected to heavy hot deformation
  10. Electrochemical performance of CuBi2O4 nanoparticles synthesized via a polyacrylamide gel route
  11. Mechanical properties of nano-SiO2 reinforced 3D glass fiber/epoxy composites
  12. Reinforcement effect and synergy of carbon nanofillers with different dimensions in high density polyethylene based nanocomposites
  13. Short Communications
  14. A general method towards transition metal monoboride nanopowders
  15. DGM News
  16. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2026 De Gruyter Brill
Heruntergeladen am 2.1.2026 von https://www.degruyterbrill.com/document/doi/10.3139/146.111484/pdf
Button zum nach oben scrollen