Home Corrosion behaviour of rolled A356 matrix composite reinforced with ceramic particles
Article
Licensed
Unlicensed Requires Authentication

Corrosion behaviour of rolled A356 matrix composite reinforced with ceramic particles

  • Seyed Omid Reza Sheykholeslami , Reza Taherzadeh Mousavian and Dermot Brabazon
Published/Copyright: November 25, 2016
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 107 Issue 12

Abstract

Hybrid ceramic particulate reinforced A356 aluminium composites were prepared via the semi-solid stir casting process followed by hot rolling. Fine micron-sized SiC powders and coarse micron-sized Al2O3 particles were used. The particles were coated in order to increase the ceramic incorporation and bonding with the metal. The corrosion behaviour of the composites was investigated using potentiodynamic polarization measurements. The results indicated that nickel coating and agglomeration of the fine SiC particles led to an increase in the corrosion current density in Tafel polarization curves. It was concluded that the composite manufacturing route employed reduced the corrosion resistance of rolled A356 alloy.

Keywords: Aluminium matrix composite; Corrosion; Polarization; Casting; Rolling
*Correspondence address, Reza Taherzadeh Mousavian, Faculty of Materials Engineering, Sahand University of Technology, P. X. Box: 7185738353, Tabriz, Iran, Tel.: +989199591160, Fax: +982144412039, E-mail:

References

[1] S.Prasad, R.Asthana: Tribol. Lett.17 (2004) 445. 10.1023/B:TRIL.0000044492.91991.f3Search in Google Scholar

[2] M.Mohammadpour, R.A.Khosroshahi, R.T.Mousavian, D.Brabazon: Ceram. Int.40 (2014) 8323. 10.1016/j.ceramint.2014.01.038Search in Google Scholar

[3] Y.M.Han, X.Chen: Materials8 (2015) 6455. 10.3390/ma8095314Search in Google Scholar PubMed PubMed Central

[4] S.Vijayarangan, N.Rajamanickam, V.Sivananth: Mater. Des.43 (2013) 532. 10.1016/j.matdes.2012.07.007Search in Google Scholar

[5] M.Roshan, T.R.Mousavian, H.Ebrahimkhani, A.Mosleh: J. Min. Metal. Sect. B49 (2013) 299. 10.2298/JMMB120701032RSearch in Google Scholar

[6] A.Pardo, M.Merino, S.Merino, F.Viejo, M.Carboneras, R.Arrabal: Corros. Sci.47 (2005) 1750. 10.1016/j.corsci.2004.08.010Search in Google Scholar

[7] E.Karakulak, R.Yamanoğlu, U.Erten, A.Zeren, S.Zor, M.Zeren: Mater. Des.59 (2014) 33. 10.1016/j.matdes.2014.02.039Search in Google Scholar

[8] N.Valibeygloo, R.A.Khosroshahi, R.T.Mousavian: Int. J. Met. Mater.20 (2013) 978. 10.1007/s12613-013-0824-2Search in Google Scholar

[9] M.Mohammadpour, R.A.Khosroshahi, R.T.Mousavian, D.Brabazon: Metall. Mater. Trans. B46 (2015) 12. 10.1007/s11663-014-0186-9Search in Google Scholar

[10] H.Ye: J. Mater. Eng. Perform.12 (2003) 288. 10.1361/105994903770343132Search in Google Scholar

[11] T.S.Srivatsan, T.Sudarshan, E.Lavernia: Prog. Mater. Sci.39 (1995) 317. 10.1016/0079-6425(95)00003-8Search in Google Scholar

[12] A.F.Boostani, S.Tahamtan, S.Yazdani, R.A.Khosroshahi, D.Wei, H.Sahamirad, X.Zhang, Z.Jiang: Scr. Mater.118 (2016) 65. 10.1016/j.scriptamat.2016.02.028Search in Google Scholar

[13] A.F.Boostani, S.Tahamtan, Z.Jiang, D.Wei, S.Yazdani, R.A.Khosroshahi, R.T.Mousavian, J.Xu, X.Zhang, D.Gong: Compos. Part A68 (2015) 155. 10.1016/j.compositesa.2014.10.010Search in Google Scholar

[14] R.Kheirifard, N.B.Khosroshahi, R.A.Khosroshahi, R.T.Mousavian, D.Brabazon: J. Mater. Des. Appl. (2016) online. 10.1177/1464420716649631Search in Google Scholar

[15] R.T.Mousavian, R.A.Khosroshahi, S.Yazdani, D.Brabazon, A.Boostani: Mater. Des.89 (2016) 58. 10.1016/j.matdes.2015.09.130Search in Google Scholar

[16] A.F.Boostani, R.T.Mousavian, S.Tahamtan, S.Yazdani, R.A.Khosroshahi, D.Wei, J.Z.Xu, D.Gong, X.Zhang, Z.Jiang: Mat. Sci. Eng A648 (2015) 92. 10.1016/j.msea.2015.09.050Search in Google Scholar

[17] 10.1007/s12598-015-0689-9Search in Google Scholar

[18] A.F.Boostani, R.T.Mousavian, S.Tahamtan, S.Yazdani, R.A.Khosroshahi, D.Wei, J.Xu, X.Zhang, Z.Jiang: Mater. Sci. Eng. A653 (2016) 99. 10.1016/j.msea.2015.12.008Search in Google Scholar

[19] A.F.Boostani, S.Yazdani, R.T.Mousavian, S.Tahamtan, R.A.Khosroshahi, D.Wei, D.Brabazon, J.Xu, X.Zhang, Z.Jiang: Mater. Des.88 (2015) 983. 10.1016/j.matdes.2015.09.063Search in Google Scholar

[20] S.Naher, D.Brabazon, L.Looney: J. Mater. Process. Technol.166 (2005) 430. 10.1016/j.jmatprotec.2004.09.043Search in Google Scholar

[21] N.B.Khosroshahi, R.A.Khosroshahi, R.T.Mousavian, D.Brabazon: Ceram. Int.40 (2014) 12149. 10.1016/j.ceramint.2014.04.055Search in Google Scholar

[22] J.Hashim, L.Looney, M.Hashmi: J. Mater. Process. Technol.119 (2001) 329. 10.1016/S0924-0136(01)00919-0Search in Google Scholar

[23] S.Naher, D.Brabazon, L.Looney: J. Mater. Process. Technol.143 (2003) 567. 10.1016/S0924-0136(03)00368-6Search in Google Scholar

[24] O.Lashkari, R.Ghomashchi: J. Mater. Process. Technol.182 (2007) 229. 10.1016/j.jmatprotec.2006.08.003Search in Google Scholar

[25] I.El-Mahallawi, Y.Shash, K.Eigenfeld, T.Mahmoud, R.Ragaie, A.Shash, M.El Saeed: Mater. Sci. Technol.26 (2010) 1226. 10.1179/174328409X441229Search in Google Scholar

[26] D.Brabazon, D.Browne, A.Carr: Mater. Sci. Eng. A326 (2002) 370. 10.1016/S0921-5093(01)01832-9Search in Google Scholar

[27] J.Hashim, L.Looney, M.Hashmi: J. Mater. Process. Technol.92 (1999) 1. 10.1016/S0924-0136(99)00118-1Search in Google Scholar

[28] C.Quaak, M.Horsten, W.Kool: Mater. Sci. Eng. A183 (1994) 247. 10.1016/0921-5093(94)90909-1Search in Google Scholar

[29] M.Paes, E.Zoqui: Mater. Sci. Eng A406 (2005) 63. 10.1016/j.msea.2005.07.018Search in Google Scholar

[30] D.Kirkwood: Int. Mater. Rev.39 (1994) 173. 10.1179/imr.1994.39.5.173Search in Google Scholar

[31] P.Seo, C.Kang, S.Lee: Int. J. Adv. Manuf. Technol.43 (2009) 482. 10.1007/s00170-008-1730-zSearch in Google Scholar

[32] H.Noori, R.T.Mousavian, R.A.Khosroshahi, D.Brabazon, S.Damadi: Surf. Eng.32 (2016) 391. 10.1179/1743294415Y.0000000035Search in Google Scholar

[33] N.B.Khosroshahi, R.A.Khosroshahi, R.T.Mousavian, D.Brabazon: Surf. Eng.30 (2014) 747. 10.1179/1743294414Y.0000000335Search in Google Scholar

[34] N.B.Khosroshahi, R.T.Mousavian, R.A.Khosroshahi, D.Brabazon: Mater. Des.83 (2015) 678. 10.1016/j.matdes.2015.06.027Search in Google Scholar

[35] P.Rohatgi: J. Mater. Sci.16 (1981) 1599. 10.1007/BF02396877Search in Google Scholar

[36] T.Rajan, R.Pillai, B.Pai: J. Mater. Sci.33 (1998) 3491. 10.1023/A:1004674822751Search in Google Scholar

[37] A.S.Verma, N.M.Suri: Mater. Today Proc.2 (2015) 2840. 10.1016/j.matpr.2015.07.299Search in Google Scholar

[38] B.Wielage, A.Dorner: Compos. Sci. Technol.59 (1999) 1239. 10.1016/S0266-3538(98)00163-8Search in Google Scholar

[39] A.Pardo, M.Merino, R.Arrabal, S.Merino, F.Viejo, A.Coy: Surf. Coat. Technol.200 (2006) 2938. 10.1016/j.surfcoat.2005.05.028Search in Google Scholar

[40] E.Marin, M.Lekka, F.Andreatta, L.Fedrizzi, G.Itskos, A.Moutsatsou, N.Koukouzas, N.Kouloumbi: Mater. Charact.69 (2012) 16. 10.1016/j.matchar.2012.04.004Search in Google Scholar

[41] I.Singh, D.Mandal, M.Singh, S.Das: Corros. Sci.51 (2009) 234. 10.1016/j.corsci.2008.11.001Search in Google Scholar

[42] G.Kiourtsidis, S.M.Skolianos: Mater. Sci. Eng. A248 (1998) 165. 10.1016/S0921-5093(98)00494-8Search in Google Scholar

[43] M.A.El-Khair, A.A.Aal: Mater. Sci. Eng. A454 (2007) 156. 10.1016/j.msea.2006.11.145Search in Google Scholar

[44] R.T.Mousavian, S.Damadi, R.A.Khosroshahi, D.Brabazon, M.Mohammadpour: Int. J. Adv. Manuf. Technol.81 (2015) 433. 10.1007/s00170-015-7246-4Search in Google Scholar

[45] 10.1007/s12598-015-0565-7Search in Google Scholar

[46] R.Arrabal, B.Mingo, A.Pardo, M.Mohedano, E.Matykina, I.Rodríguez: Corros. Sci.73 (2013) 342. 10.1016/j.corsci.2013.04.023Search in Google Scholar

[47] B.Dikici, C.Tekmen, M.Gavgali, U.Cocen: J. Mech. Eng.57 (2011) 11. 10.5545/sv-jme.2010.111Search in Google Scholar

[48] W.R.Osorio, E.S.Freitas, J.E.Spinelli, M.V.Cante, C.R.Afonso, A.Garcia: Int. J. Electrochem. Sci.7 (2012) 9946.Search in Google Scholar

[49] E.Darmiani, I.Danaee, M.Golozar, M.Toroghinejad: J. Alloys Compd.552 (2013) 31. 10.1016/j.jallcom.2012.10.069Search in Google Scholar

[50] B.Bobić, S.Mitrović, M.Babić, I.Bobić: Tribol. Int.32 (2010) 3.Search in Google Scholar

[51] R.T.Mousavian, E.Hajjari, D.Ghasemi, M.K.Manesh, K.Ranjbar: Eng. Fail. Anal.18 (2011) 202. 10.1016/j.engfailanal.2010.08.022Search in Google Scholar

[52] K.S.Rao, K.P.Rao: Trans. Indian Inst. Met.57 (2004) 593.Search in Google Scholar

[53] R.P.Wei, C.-M.Liao, M.Gao: Metall. Mater. Trans. A29 (1998) 1153. 10.1007/s11661-998-0241-8Search in Google Scholar

Received: 2016-07-17
Accepted: 2016-09-14
Published Online: 2016-11-25
Published in Print: 2016-12-08

© 2016, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Study of plastic deformation mechanisms in TA15 titanium alloy by combination of geometrically necessary and statistically-stored dislocations
  5. Effects of diffusion alloying on the microstructure and properties of TiC-reinforced Fe-based PM materials
  6. Enhancing the hardness/compression/damping response of magnesium by reinforcing with biocompatible silica nanoparticulates
  7. Corrosion behaviour of rolled A356 matrix composite reinforced with ceramic particles
  8. Experimental investigation of phase equilibria in the Nb–Si–Ta ternary system
  9. Enthalpy of mixing of liquid Cu–Fe–Hf alloys at 1 873 K
  10. Synthesis and properties evaluation of β-SiAlON prepared by mechanical alloying followed by different sintering technique
  11. Influence of germanate anomaly on elastic, structural, and optical properties of xNa2O-(99–x)[80GeO2:20PbO]-1Er2O3 lead–germanate glasses
  12. Short Communications
  13. Effects of martensite cold work on the reverse austenite formation
  14. Synthesis and field-emission characteristics of SiC nanowire forest
  15. DGM News
  16. DGM News
https://doi.org/10.3139/146.111443
Keywords for this article
Aluminium matrix composite; Corrosion; Polarization; Casting; Rolling

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Study of plastic deformation mechanisms in TA15 titanium alloy by combination of geometrically necessary and statistically-stored dislocations
  5. Effects of diffusion alloying on the microstructure and properties of TiC-reinforced Fe-based PM materials
  6. Enhancing the hardness/compression/damping response of magnesium by reinforcing with biocompatible silica nanoparticulates
  7. Corrosion behaviour of rolled A356 matrix composite reinforced with ceramic particles
  8. Experimental investigation of phase equilibria in the Nb–Si–Ta ternary system
  9. Enthalpy of mixing of liquid Cu–Fe–Hf alloys at 1 873 K
  10. Synthesis and properties evaluation of β-SiAlON prepared by mechanical alloying followed by different sintering technique
  11. Influence of germanate anomaly on elastic, structural, and optical properties of xNa2O-(99–x)[80GeO2:20PbO]-1Er2O3 lead–germanate glasses
  12. Short Communications
  13. Effects of martensite cold work on the reverse austenite formation
  14. Synthesis and field-emission characteristics of SiC nanowire forest
  15. DGM News
  16. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 17.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111443/html
Scroll to top button