Home Study of plastic deformation mechanisms in TA15 titanium alloy by combination of geometrically necessary and statistically-stored dislocations
Article Open Access

Study of plastic deformation mechanisms in TA15 titanium alloy by combination of geometrically necessary and statistically-stored dislocations

  • Dong He , Qiang Li , Yu Yan , Xiguang Huang and Tabassam Yasmeen
Published/Copyright: November 25, 2016
Download Article (PDF)
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 107 Issue 12

Received: 2016-04-17
Accepted: 2016-08-12
Published Online: 2016-11-25
Published in Print: 2016-12-08

© 2016, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Study of plastic deformation mechanisms in TA15 titanium alloy by combination of geometrically necessary and statistically-stored dislocations
  5. Effects of diffusion alloying on the microstructure and properties of TiC-reinforced Fe-based PM materials
  6. Enhancing the hardness/compression/damping response of magnesium by reinforcing with biocompatible silica nanoparticulates
  7. Corrosion behaviour of rolled A356 matrix composite reinforced with ceramic particles
  8. Experimental investigation of phase equilibria in the Nb–Si–Ta ternary system
  9. Enthalpy of mixing of liquid Cu–Fe–Hf alloys at 1 873 K
  10. Synthesis and properties evaluation of β-SiAlON prepared by mechanical alloying followed by different sintering technique
  11. Influence of germanate anomaly on elastic, structural, and optical properties of xNa2O-(99–x)[80GeO2:20PbO]-1Er2O3 lead–germanate glasses
  12. Short Communications
  13. Effects of martensite cold work on the reverse austenite formation
  14. Synthesis and field-emission characteristics of SiC nanowire forest
  15. DGM News
  16. DGM News
https://doi.org/10.3139/146.111438
Keywords for this article
Deformation mechanisms; Geometrically necessary dislocation; Slip line; Transmission electron microscopy; Electron backscatter diffraction
Creative Commons
BY 4.0

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Study of plastic deformation mechanisms in TA15 titanium alloy by combination of geometrically necessary and statistically-stored dislocations
  5. Effects of diffusion alloying on the microstructure and properties of TiC-reinforced Fe-based PM materials
  6. Enhancing the hardness/compression/damping response of magnesium by reinforcing with biocompatible silica nanoparticulates
  7. Corrosion behaviour of rolled A356 matrix composite reinforced with ceramic particles
  8. Experimental investigation of phase equilibria in the Nb–Si–Ta ternary system
  9. Enthalpy of mixing of liquid Cu–Fe–Hf alloys at 1 873 K
  10. Synthesis and properties evaluation of β-SiAlON prepared by mechanical alloying followed by different sintering technique
  11. Influence of germanate anomaly on elastic, structural, and optical properties of xNa2O-(99–x)[80GeO2:20PbO]-1Er2O3 lead–germanate glasses
  12. Short Communications
  13. Effects of martensite cold work on the reverse austenite formation
  14. Synthesis and field-emission characteristics of SiC nanowire forest
  15. DGM News
  16. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 16.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111438/html
Scroll to top button