Home Technology A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials
Article
Licensed
Unlicensed Requires Authentication

A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials

  • Hauke Springer , Cem Tasan and Dierk Raabe
Published/Copyright: January 7, 2015
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 106 Issue 1

Abstract

We introduce a new thermo-mechanical approach for producing layered bulk samples built-up from the constituent phases of structural materials for the analysis of multiphase co-deformation phenomena. Following a thermo-mechanically controlled roll-bonding procedure, the intrinsic properties of the microstructural components as well as their mutual mechanical interaction and interfacial phenomena can be systematically investigated in highly controlled model microstructures of reduced complexity. The effectiveness of the approach is demonstrated on two examples where austenite or martensite layers, respectively, are introduced in a bulk ferritic matrix, representing in either case components of high strength steels. Special emphasis is laid on how the plasticity of martensite within ferrite, as a key parameter required for understanding and optimising dual phase steels, can be investigated following the proposed approach.

Keywords: Multiphase materials; Steels; Dual-phase steel; Microstructure design; Micro-mechanical testing
* Correspondence address, Dr. Hauke Springer, Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Straße 1, 40237 Düsseldorf, Germany. Tel.: +49 211 6792 796, Fax: +49 211 6792 333, E-mail:

References

[1] H.K.D.H.Bhadeshia, R.Honeycombe: Steels, Microstructure and Properties, 3rd Ed.Elsevier, Oxford, UK (2006).Search in Google Scholar

[2] H.Berns, W.Theisen: Eisenwerkstoffe Stahl und Gusseisen, Springer VerlagBerlin, Heidelberg (2006).Search in Google Scholar

[3] M.F.Ashby: Materials Selection in Mechanical Design, Butterworth-Heinemann, Burlington, MA, USA (2005).Search in Google Scholar

[4] M.Calcagnotto, D.Ponge, D.Raabe: Mater. Sci. Eng. A527 (2010) 7832–7840. 10.1016/j.msea.2010.01.004Search in Google Scholar

[5] D.Raabe, D.Ponge, O.Dmitrieva, B.Sander: Scr. Mater.60 (2009) 1141–1144. 10.1016/j.scriptamat.2009.02.062Search in Google Scholar

[6] C.Herrera, D.Ponge, D.Raabe: Acta Mater.59 (2011) 4653–4664. 10.1016/j.actamat.2011.04.011Search in Google Scholar

[7] O.Bouaziza, S.Allaina, C.P.Scotta, P.Cugya, D.Barbier: Curr. Opin. Solid State Mater. Sci.15 (2011) 141–168. 10.1016/j.cossms.2011.04.002Search in Google Scholar

[8] G.Frommeyer, U.Brüx: Steel Res. Int.77 (2006) 627–633.10.1002/srin.200606440Search in Google Scholar

[9] U.Dilthey, L.Stein: Sci. Technol. Weld. Joining11 (2006) 135. 10.1179/174329306X85967Search in Google Scholar

[10] J.Speer, D.K.Matlock, B.CDe Cooman, J.G.Schroth: Acta Mater.51 (2003) 2611–2622. 10.1016/S1359-6454(03)00059-4Search in Google Scholar

[11] J.G.Speer, D.V.Edmonds, F.C.Rizzo, D.K.Matlock: Curr. Opin. Solid State Mater. Sci.8 (2004) 219–237. 10.1016/j.cossms.2004.09.003Search in Google Scholar

[12] G.Gottstein: Physical Foundations of Materials Science. Springer VerlagBerlin (2004). 10.1007/978-3-662-09291-0Search in Google Scholar

[13] N.J.Kim, G.Thomas: Met. Trans. A12 (1981) 483. 10.1007/BF02643691Search in Google Scholar

[14] M.Calcagnotto, D.Ponge, E.Demir, D.Raabe: Mater. Sci. Eng. A527 (2010) 2738–2746. 10.1016/j.msea.2010.01.004Search in Google Scholar

[15] H.Springer, M.Belde, D.Raabe: Mater. Sci. Eng. A582 (2013) 235–244. 10.1016/j.msea.2013.06.036Search in Google Scholar

[16] L.Yuan, D.Ponge, J.Wittig, P.Choi, J.A.Jiménez, D.Raabe: Acta Mater.60 (2012) 2790–2804. 10.1016/j.actamat.2011.11.042Search in Google Scholar

[17] J.R.Greer, J.Y.Kim, M.J.Burke: JOM 6112 (2009) 19–25. 10.1007/s11837-009-0174-8Search in Google Scholar

[18] O.Kraft, C.A.Volkert: Adv. Eng. Mater.3 (2001) 99–110. 10.1002/1527-2648(200103)3:3<99::AID-ADEM99>3.0.CO;2-2Search in Google Scholar

[19] C.C.Tasan, J.P.M.Hoefnagels, M.G.D.Geers: Scr. Mater.63 (2010) 835–838. 10.1016/j.scriptamat.2010.02.014Search in Google Scholar

[20] D.R.Lesuer, C.K.Syn, O.D.Sherby, J.Wadsworth, J.J.Lewandowski, W.H.HuntJr.: Int. Mater. Rev.41 (1996) 5, 169. 10.1179/imr.1996.41.5.169Search in Google Scholar

[21] D.Embury, O.Bouaziz: Annu. Rev. Mater. Res.40 (2010) 213. 10.1146/annurev-matsci-070909-104438Search in Google Scholar

[22] N.A.Mara, D.Bhattacharyya, P.Dickerson, R.G.Hoagland, A.Misra: Appl. Phys. Lett.92 (2008) 231901. 10.1063/1.2938921Search in Google Scholar

[23] J.Emmerlich, D.Music, M.Braun, P.Fayek, F.Munnik, J.M.Schneider: J. Phys. D: Appl. Phys.42 (2009) 6. 10.1088/0022-3727/42/18/185406Search in Google Scholar

[24] S.Chatterjee, T.K.Pal: Wear255 (2003) 417–425. 10.1016/S0043-1648(03)00101-7Search in Google Scholar

[25] M.F.Buchely, J.C.Gutierrez, L.M.Léon, A.Toro: Wear259 (2005) 52. 10.1016/j.wear.2005.03.002Search in Google Scholar

[26] D.S.Gnanamuthu: Opt. Eng.19 (1980) 783. 10.1117/12.7972604Search in Google Scholar

[27] X.Zhang, N.Hansen, Y.Gao, X.Huang: Acta Mater.60 (2012) 5933–5943. 10.1016/j.actamat.2011.09.008Search in Google Scholar

[28] I.J.Beyerlein, N.A.Mara, J.Wang, J.S.Carpenter, S.J.Zheng, W.Z.Han, R.F.Zhang, K.Kang, T.Nizolek, T.M.Pollock: JOM64 (2012) 10. 10.1007/s11837-012-0431-0Search in Google Scholar

[29] S.Zheng, I.Beyerlein, J.S.Carpenter, K.Kang, J.Wang, W.Han, N.A.Mara: Nature Com.4 (2013) 1969.10.1038/ncomms2969Search in Google Scholar

[30] S.Roy, B.R.Nataraj, S.Suwas, S.Kumar, K.Chattopadhyay: Mater. Des.36 (2012) 529. 10.1016/j.matdes.2011.11.015Search in Google Scholar

[31] N.Tsuji, Y.Saito, Y.Minamino: Scr. Mater.47 (2002) 893. 10.1016/S1359-6462(02)00088-XSearch in Google Scholar

[32] L.Li, K.Nagai, F.Yin: Sci. Technol. Adv. Mater.9 (2008) 11. 10.1088/1468-6996/9/2/023001Search in Google Scholar PubMed PubMed Central

[33] S.Nambu, M.Michiuchi, J.Inoue, T.Koseki: Comp. Sci. Technol.69 (2009) 1936. 10.1016/j.compscitech.2009.04.013Search in Google Scholar

[34] M.J.Rathod, M.Kutsuna: Weld. Res.16 (2004) 26.Search in Google Scholar

[35] F.H.Milanez, M.B.H.Mantelli: Int. J. Heat Mass Transfer46 (2003) 4573. 10.1016/S0017-9310(03)00294-1Search in Google Scholar

[36] J.Inoue, S.Nambu, Y.Ishimoto, T.Koseki: Scr. Mater.59 (2008) 1055. 10.1016/j.scriptamat.2008.07.020Search in Google Scholar

[37] S.Nambu, M.Michiuchi, Y.Ishimoto, K.Asakura, J.Inoue, T.Koseki: Scr. Mater.60 (2009) 221. 10.1016/j.scriptamat.2008.10.007Search in Google Scholar

[38] T.A.Wynna, D. BhattacharyyaeMisra, N.A.Mara: Mater. Sci. Eng. A564 (2013) 213. 10.1016/j.msea.2012.11.114Search in Google Scholar

[39] M.Eizadjou, H. DaneshManesh, K.Janghorban: Mater. Des.29 (2008) 909. 10.1016/j.matdes.2007.03.020Search in Google Scholar

[40] L.S.Darken: Trans. AIME, TP2443, Metals Technology (1948) 430.Search in Google Scholar

[41] R.Bernst, G.Inden, A.Schneider: Calphad.32 (2008) 207. 10.1016/j.calphad.2008.02.002Search in Google Scholar

[42] Y.Hayakawa, J.A.Szpunars: Acta Mater.45 (1997) 11, 4713. 10.1016/S1359-6454(96)00251-0Search in Google Scholar

[43] Z.Xia, Y.Kang, Q.Wang: J. Magn. Mater.320 (2008) 3229. 10.1016/j.jmmm.2007.06.010Search in Google Scholar

[44] H.Springer, D.Raabe: Acta Mater.60 (2012) 4950. 10.1016/j.actamat.2012.05.017Search in Google Scholar

[45] R.Jamaati, M.R.Toroghinejad: Mater. Des.31 (2010) 4816. 10.1016/j.matdes.2010.04.022Search in Google Scholar

[46] O.M.Abdelhadi, L.Ladani, J.Razmi: Mech. Mater.43 (2011) 885. 10.1016/j.mechmat.2011.09.006Search in Google Scholar

[47] A.Tasdemirci, I.W.Hall: Mater. Des.30 (2009) 1533. 10.1016/j.matdes.2008.07.054Search in Google Scholar

[48] J.Yanagimoto, T.Oya, S.Kawanishi, N.Tiesler, T.Koseki: CIRP Annals – Manufact. Technol.59 (2010) 287. 10.1016/j.cirp.2010.03.109Search in Google Scholar

[49] C.W.Lee, J.H.Han, J.Yoon, M.C.Shin, S.I.Kwun: Surf. Coat. Technol.204 (2010) 2223–2229. 10.1016/j.surfcoat.2009.12.014Search in Google Scholar

[50] M.Göken, H.W.Höppel: Adv. Mater.23 (2011) 2663. 10.1002/adma.201100407Search in Google Scholar

[51] Y.Liu, D.Bufford, H.Wang, C.Sun, X.Zhang: Acta Mater.59 (2011) 1924. 10.1016/j.actamat.2010.10.052Search in Google Scholar

[52] B.Ham, X.Zhang: Mater. Sci. Eng. A528 (2011) 2028. 10.1016/j.msea.2010.10.101Search in Google Scholar

[53] J.D.Embury, R.M.Fisher: Acta Metall.14 (1966) 147. 10.1016/0001-6160(66)90296-3Search in Google Scholar

[54] D.Raabe, P.P.Choi, Y.J.Li, A.Kostka, X.Sauvage, F.Lecouturier, K.Hono, R.Kirchheim, R.Pippan, D.Embury: MRS Bull.35 (2010) 982. 10.1557/mrs2010.703Search in Google Scholar

[55] Y.J.Li, P.P.Choi, C.Borchers, S.Westerkamp, S.Goto, D.Raabe, R.Kirchheim: Acta Mater.59 (2011) 3965. 10.1016/j.actamat.2010.08.015Search in Google Scholar

[56] C.Jeonga, T.Oyab, J.Yanagimoto: J. Mater. Process. Technol.213 (2013) 614. 10.1016/j.jmatprotec.2012.10.017Search in Google Scholar

Received: 2014-05-12
Accepted: 2014-08-15
Published Online: 2015-01-07
Published in Print: 2015-01-09

© 2015, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials
  5. Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy
  6. An experimental study of the precipitation kinetics of pre-rolled Ni-Span-C 902 superalloy
  7. Influences of high temperature on the microstructural, electrical and mechanical properties of Ni-23 wt.% Al alloy
  8. Investigation of the wear resistance and microstructure of Al/SiC metal matrix composites as a function of reinforcement volume fraction and reinforcement to matrix particle size ratio applying artificial neural network
  9. Influence of zinc (II) ion concentration on Ni–Zn–P coatings deposited onto aluminum and their corrosion behavior
  10. Joining steel to aluminum alloy by resistance spot welding with a rivet
  11. Electrophysical and structure-sensitive properties of liquid Ga–In alloys
  12. Short Communications
  13. Synthesis and characterization of the novel nanocomposite Co(OH)2/graphene as supercapacitor materials
  14. Preparation of MnAlC flakes by surfactant-assisted ball-milling and the effects of annealing
  15. An improved two-stage sintering method for tungsten heavy alloys: conventional solid-phase sintering followed by microwave heating
  16. Effect of excess Pb on ferroelectric characteristics of conductive Al-doped ZnO and Sn-doped In2O3 top electrodes in PbLaZrTiOx capacitors
  17. Effects of La–Zn substituent and calcination temperature on the microstructure and magnetic properties of Sr-ferrites
  18. Predicting the corrosion tendency of α-brass in acidic and alkaline tap water
  19. People
  20. 10.3139/146.610026
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.111156
Keywords for this article
Multiphase materials; Steels; Dual-phase steel; Microstructure design; Micro-mechanical testing

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials
  5. Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy
  6. An experimental study of the precipitation kinetics of pre-rolled Ni-Span-C 902 superalloy
  7. Influences of high temperature on the microstructural, electrical and mechanical properties of Ni-23 wt.% Al alloy
  8. Investigation of the wear resistance and microstructure of Al/SiC metal matrix composites as a function of reinforcement volume fraction and reinforcement to matrix particle size ratio applying artificial neural network
  9. Influence of zinc (II) ion concentration on Ni–Zn–P coatings deposited onto aluminum and their corrosion behavior
  10. Joining steel to aluminum alloy by resistance spot welding with a rivet
  11. Electrophysical and structure-sensitive properties of liquid Ga–In alloys
  12. Short Communications
  13. Synthesis and characterization of the novel nanocomposite Co(OH)2/graphene as supercapacitor materials
  14. Preparation of MnAlC flakes by surfactant-assisted ball-milling and the effects of annealing
  15. An improved two-stage sintering method for tungsten heavy alloys: conventional solid-phase sintering followed by microwave heating
  16. Effect of excess Pb on ferroelectric characteristics of conductive Al-doped ZnO and Sn-doped In2O3 top electrodes in PbLaZrTiOx capacitors
  17. Effects of La–Zn substituent and calcination temperature on the microstructure and magnetic properties of Sr-ferrites
  18. Predicting the corrosion tendency of α-brass in acidic and alkaline tap water
  19. People
  20. 10.3139/146.610026
  21. DGM News
  22. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 31.12.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111156/pdf
Scroll to top button