Startseite An experimental study of the precipitation kinetics of pre-rolled Ni-Span-C 902 superalloy
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

An experimental study of the precipitation kinetics of pre-rolled Ni-Span-C 902 superalloy

  • Mohammad Rasool Moazami Godarzi , Maryam Morakabati , Seyed Mahdi Abbasi und Hassan Badri
Veröffentlicht/Copyright: 7. Januar 2015
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 106 Heft 1

Abstract

In the present work, the effects of cold work and aging parameters on the microstructure and precipitation kinetics of Ni-Span-C 902 superalloy were studied. The solution treated alloy was cold-rolled to different deformations from 30 to 60% followed by aging in the temperature range of 450–850°C for different times, from 102 to 105 seconds. The results showed that the 50% cold-rolled alloy attained its maximum hardness by aging at 650°C for 105 seconds. This was concurrent with the fine distributed gamma′ precipitates that appeared in the microstructure. By increasing temperature from 750 to 850°C, overaging occurred due to the increase in gamma′ particle size and the formation of epsilon-phase. The estimated activation energy of the precipitation reaction, based on Johnson–Mehl–Avrami–Kolmogorov analysis, was determined to be 254 kJ · mol−1 for the 50% cold-rolled alloy.

Keywords: Superalloy; Aging; Cold working; JMAK analysis
* Correspondence address, Associate Professor Seyed Mahdi Abbasi, Tehransar, Lale Avenue, Badakhshan Street, Number 40, 1387944968, Tehran, Iran. Tel.: +98 9124181452, E-mail:

References

[1] S.J.Patel: JOM58 (2006) 18. 10.1007/s11837-006-0076-ySuche in Google Scholar

[2] M.Lozovan: Natl. Inst. Res. Dev. Tech. Phys. (2012) 608.Suche in Google Scholar

[3] A.A.Tavassoli: Scr. Metall.7 (1973) 350. 10.1016/0036-9748(73)90053-7Suche in Google Scholar

[4] M.J.Donachie, S.J.Donachie: Superalloy: A Technical Guide, ASM Int.: Metals Park, OH (1988).Suche in Google Scholar

[5] M.J.Zhao, Z.F.Guo, H.Liang, L.J.Rong: Mater. Sci. Eng. A527 (2010) 5844. 10.1016/j.msea.2009.10.064Suche in Google Scholar

[6] K.Kusabiraki, E.Amada, T.Ooka, S.Sajl: ISIJ Int.37 (1997) 80. 10.2355/isijinternational.37.80Suche in Google Scholar

[7] A.A.Tavassoli, A.P.Miodownik: Met. Sci.9 (1975) 493. 10.1179/030634575790444603Suche in Google Scholar

[8] Z.G.Liu, T.AI-Kassab, P.Haasen: Scr. Metall. Mater.24 (1990) 655. 10.1016/0956-716X(90)90061-KSuche in Google Scholar

[9] Y.Chen, Z.G.Liu, Y.N.Cao, Z.S.Zhu: Scr. Metall.22 (1988) 1075. 10.1016/S0036-9748(88)80027-9Suche in Google Scholar

[10] Special Metals, Ni-Span-C Alloy 902, Special Metals Corporation, Publ. Nr. SMC-086 (2004).Suche in Google Scholar

[11] A.V.Sazykina, O.A.Khomenko: Met. Sci. Heat. Treat.18 (1976) 1040. 10.1007/BF00705173Suche in Google Scholar

[12] Z.Kaczkowski: Physica B+ C119 (1983) 125. 10.1016/0378-4363(83)90177-8Suche in Google Scholar

[13] W.Wang, F.Brisset, A.L.Helbert, D.Solas, I.Drouelle, M.H.Mathon, T.Baudin: Mat. Sci. Eng. A589 (2014) 112. 10.1016/j.msea.2013.09.064Suche in Google Scholar

[14] M.Meyers, K.Chawla: Mechanical behavior of materials, Cambridge University Press, USA (2009).Suche in Google Scholar

[15] K.Yang, Y.Xie, X.Zhao, C.G.Fan, Y.Y.Li: Scr. Metall. Mater.25 (1991) 2399. 10.1016/0956-716X(91)90037-2Suche in Google Scholar

[16] M.Farvizi, S.Asgari: Mat. Sci. Eng. A480 (2008) 434. 10.1016/j.msea.2007.07.052Suche in Google Scholar

[17] F.J.Humphreys, M.Hatherly: Recrystallization and related annealing phenomena, Elsevier, USA (2004). 10.1016/B978-008044164-1/50005-0Suche in Google Scholar

[18] D.A.Porter, K.E.Easterling: Phase Transformation in Metals, Chapman & Hall, London (1981).Suche in Google Scholar

[19] M.Seifollahi, S.Kheirandish, S.H.Razavi, S.M.Abbasi, P.Sahrapour: ISIJ Int.53 (2013) 313. 10.2355/isijinternational.53.311Suche in Google Scholar

[20] K.Kusabiraki, X.Zhang, T.Ooka: ISIJ Int.35 (1995) 1115. 10.2355/isijinternational.35.1115Suche in Google Scholar

[21] V.K.Vasudvan, S.J.Kim, C.M.Wayman: Metall. Trans. A12 (1990) 2655. 10.1007/BF02646061Suche in Google Scholar

[22] H.Mirzadeh, A.Najafizadeh: Mater. Chem. Phys.116 (2009) 119. 10.1016/j.matchemphys.2009.02.049Suche in Google Scholar

[23] C.V.Robino, P.W.Hochanadel, G.R.Edwards, M.J.Cieslak: Metall. Mater. Trans. A25 (1994) 697. 10.1007/BF02665446Suche in Google Scholar

[24] G.R.EdeSouza, S.B.Gabriel, J.Dille, D.S.dosSantos, L.H.Almeida: Mater. Sci. Eng. A564 (2013) 102. 10.1016/j.msea.2012.10.095Suche in Google Scholar

Received: 2014-04-24
Accepted: 2014-08-15
Published Online: 2015-01-07
Published in Print: 2015-01-09

© 2015, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials
  5. Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy
  6. An experimental study of the precipitation kinetics of pre-rolled Ni-Span-C 902 superalloy
  7. Influences of high temperature on the microstructural, electrical and mechanical properties of Ni-23 wt.% Al alloy
  8. Investigation of the wear resistance and microstructure of Al/SiC metal matrix composites as a function of reinforcement volume fraction and reinforcement to matrix particle size ratio applying artificial neural network
  9. Influence of zinc (II) ion concentration on Ni–Zn–P coatings deposited onto aluminum and their corrosion behavior
  10. Joining steel to aluminum alloy by resistance spot welding with a rivet
  11. Electrophysical and structure-sensitive properties of liquid Ga–In alloys
  12. Short Communications
  13. Synthesis and characterization of the novel nanocomposite Co(OH)2/graphene as supercapacitor materials
  14. Preparation of MnAlC flakes by surfactant-assisted ball-milling and the effects of annealing
  15. An improved two-stage sintering method for tungsten heavy alloys: conventional solid-phase sintering followed by microwave heating
  16. Effect of excess Pb on ferroelectric characteristics of conductive Al-doped ZnO and Sn-doped In2O3 top electrodes in PbLaZrTiOx capacitors
  17. Effects of La–Zn substituent and calcination temperature on the microstructure and magnetic properties of Sr-ferrites
  18. Predicting the corrosion tendency of α-brass in acidic and alkaline tap water
  19. People
  20. 10.3139/146.610026
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.111149
Schlagwörter für diesen Artikel
Superalloy; Aging; Cold working; JMAK analysis

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. A novel roll-bonding methodology for the cross-scale analysis of phase properties and interactions in multiphase structural materials
  5. Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy
  6. An experimental study of the precipitation kinetics of pre-rolled Ni-Span-C 902 superalloy
  7. Influences of high temperature on the microstructural, electrical and mechanical properties of Ni-23 wt.% Al alloy
  8. Investigation of the wear resistance and microstructure of Al/SiC metal matrix composites as a function of reinforcement volume fraction and reinforcement to matrix particle size ratio applying artificial neural network
  9. Influence of zinc (II) ion concentration on Ni–Zn–P coatings deposited onto aluminum and their corrosion behavior
  10. Joining steel to aluminum alloy by resistance spot welding with a rivet
  11. Electrophysical and structure-sensitive properties of liquid Ga–In alloys
  12. Short Communications
  13. Synthesis and characterization of the novel nanocomposite Co(OH)2/graphene as supercapacitor materials
  14. Preparation of MnAlC flakes by surfactant-assisted ball-milling and the effects of annealing
  15. An improved two-stage sintering method for tungsten heavy alloys: conventional solid-phase sintering followed by microwave heating
  16. Effect of excess Pb on ferroelectric characteristics of conductive Al-doped ZnO and Sn-doped In2O3 top electrodes in PbLaZrTiOx capacitors
  17. Effects of La–Zn substituent and calcination temperature on the microstructure and magnetic properties of Sr-ferrites
  18. Predicting the corrosion tendency of α-brass in acidic and alkaline tap water
  19. People
  20. 10.3139/146.610026
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 30.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111149/html
Button zum nach oben scrollen