Startseite Technik Microstructure and mechanical properties of Ti2AlC-reinforced TiAl composites
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Microstructure and mechanical properties of Ti2AlC-reinforced TiAl composites

  • Taotao Ai , Fang Liu , Qi Yu , Xiaoming Feng , Yingtang Zhang und Wenhu Li
Veröffentlicht/Copyright: 17. November 2014
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 105 Heft 11

Abstract

Ti2AlC/TiAl composites were successfully in-situ synthesized by reaction hot pressing using Ti, Al, TiC and CNTs as starting materials. The results indicate that the as-sintered composites mainly consist of Ti2AlC and TiAl phases. The mechanical properties of the 23 wt.% Ti2AlC/TiAl composite exhibit the highest values, with a flexural strength and fracture toughness of 652.5 ± 76.8 MPa and 6.6 ± 0.5 MPa m1/2, respectively. The complex structure coupled with dispersed Ti2AlC micro-particulates is responsible for the enhancement in the strength. Toughening of the composite is mainly attributed to crack deflection, crack bridging, crack branching and pull-out of the Ti2AlC particles, as well as transgranular cracking.

Keywords: Composites; Carbide; Microstructure; Mechanical properties
* Taotao Ai, School of Materials Science and Engineering, Shaanxi University of Technology, Hanzhong 723000, P.R. China. Tel.: +86 916 2291082, Fax: +86 916 2291082, E-mail:

References

[1] J.Cheng, Y.Yu, L.C.Fu, F.Li, Z.H.Qiao, J.S.Li, J.Yang, W.M.Liu: Tribol. Int.62 (2013) 91. 10.1016/j.triboint.2013.02.006Suche in Google Scholar

[2] E.A.Loria: Intermetallics8 (2000) 1339. 10.1016/S0966-9795(00)00073-XSuche in Google Scholar

[3] S.L.Shu, B.Xing, F.Qiu, S.B.Jin, Q.C.Jiang: Mater. Sci. Eng. A560 (2013) 596. 10.1016/j.msea.2012.10.001Suche in Google Scholar

[4] S.L.Shu, F.Qiu, B.Xing, S.B.Jin, Y.W.Wang, Q.C.Jiang: Intermetallics28 (2012) 65. 10.1016/j.intermet.2012.03.053Suche in Google Scholar

[5] K.Kothari, R.Radhakrishnan, N.M.Wereley: Prog. Aerosp. Sci.55 (2012) 1. 10.1016/j.paerosci.2012.04.001Suche in Google Scholar

[6] M.H.Loretto, A.B.Godfrey, D.Hu, P.A.Blenkinsop, I.P.Jones, T.T.Cheng: Intermetallics6 (1998) 663. 10.1016/S0966-9795(98)00035-1Suche in Google Scholar

[7] A.Bartels, H.Kestler, H.Clemens: Mater. Sci. Eng. A329–331 (2002) 153. 10.1016/S0921-5093(01)01552-0Suche in Google Scholar

[8] M.W.Barsoum: Prog. Solid State Chem.28 (2000) 201. 10.1016/S0079-6786(00)00006-6Suche in Google Scholar

[9] M.Radovic, M.W.Barsoum, A.Ganguly, T.Zhen, P.Finkel, S.R.Kalidindi, E.Lara-Curzio: Acta Mater.54 (2006) 2757. 10.1016/j.actamat.2006.02.019Suche in Google Scholar

[10] X.H.Wang, Y.C.Zhou: Oxid. Met.59 (2003) 303. 10.1023/A:1023092027697Suche in Google Scholar

[11] B.Mei, Y.Miyamoto: Mater. Chem. Phys.75 (2002) 291. 10.1016/S0254-0584(02)00078-0Suche in Google Scholar

[12] C.H.Yang, F.Wang, T.T.Ai, J.F.Zhu: Ceram. Int.40 (2014) 8165. 10.1016/j.ceramint.2013.05.119Suche in Google Scholar

[13] F.Yang, F.T.Kong, Y.Y.Chen, S.L.Xiao: J. Alloys Comp.496 (2010) 462. 10.1016/j.jallcom.2010.02.015Suche in Google Scholar

[14] J.Wang, N.Q.Zhao, P.Nash, E.Z.Liu, C.N.He, C.S.Shi, J.J.Li: J. Alloys Compd.578 (2013) 481. 10.1016/j.jallcom.2013.04.153Suche in Google Scholar

[15] Z.S.Xu, X.L.Shi, W.Z.Zhai, J.Yao, S.Y.Song, Q.X.Zhang: Carbon67 (2014) 168. 10.1016/j.carbon.2013.09.077Suche in Google Scholar

[16] Y.L.Bai, X.D.He, C.C.Zhu, G.Q.Chen: J. Am. Ceram. Soc.95 (2012) 358. 10.1111/j.1551-2916.2011.04934.xSuche in Google Scholar

[17] K.T.Faber, A.G.Evans: Acta Metall.31 (1983) 565. 10.1016/0001-6160(83)90046-9Suche in Google Scholar

Received: 2014-04-14
Accepted: 2014-05-20
Published Online: 2014-11-17
Published in Print: 2014-11-10

© 2014, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Thermodynamic description of the Ta–W–Zr system
  5. Interrelationships of defects, nitride modification and excess nitrogen in nitrided Fe-4.75 at.% Al alloy
  6. Effects of rotating magnetic and ultrasonic fields on the microstructure and mechanical properties of Al-8 wt.%Si alloy
  7. Microstructural control of Ti-46Al-7Nb-0.7Cr-0.2Ni-0.1Si alloy by heat treatment
  8. Structure and mechanical properties of Zn-(5–25) Al alloys
  9. Hot ductility behavior of near-alpha titanium alloy IMI834
  10. The effect of nano-SiO2 on magnetic and dielectric properties of Li–Zn ferrite
  11. Production of aluminum nano-composite reinforced by tungsten carbide particles via mechanical milling and subsequent hot pressing
  12. Short Communications
  13. Microstructure and texture evolution of Mg–Li alloy during rolling
  14. Microstructure and mechanical properties of Ti2AlC-reinforced TiAl composites
  15. Thermal fatigue behavior of cast superalloy Inconel 713LC
  16. Study of structural, morphological and optical properties of S and Cu co-doped SnO2 nanostructured thin films prepared by spray pyrolysis
  17. Synthesis and characterization of zirconium nitride coatings by cathodic arc sputtering technique
  18. Plasmon enhanced scattering and fluorescence in amorphous matrix
  19. Novel preparation of a porous composite insulating scaffold from forsterite and sodium carbonate media
  20. People
  21. Werner Mader, 65 years
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.111119
Schlagwörter für diesen Artikel
Composites; Carbide; Microstructure; Mechanical properties

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Thermodynamic description of the Ta–W–Zr system
  5. Interrelationships of defects, nitride modification and excess nitrogen in nitrided Fe-4.75 at.% Al alloy
  6. Effects of rotating magnetic and ultrasonic fields on the microstructure and mechanical properties of Al-8 wt.%Si alloy
  7. Microstructural control of Ti-46Al-7Nb-0.7Cr-0.2Ni-0.1Si alloy by heat treatment
  8. Structure and mechanical properties of Zn-(5–25) Al alloys
  9. Hot ductility behavior of near-alpha titanium alloy IMI834
  10. The effect of nano-SiO2 on magnetic and dielectric properties of Li–Zn ferrite
  11. Production of aluminum nano-composite reinforced by tungsten carbide particles via mechanical milling and subsequent hot pressing
  12. Short Communications
  13. Microstructure and texture evolution of Mg–Li alloy during rolling
  14. Microstructure and mechanical properties of Ti2AlC-reinforced TiAl composites
  15. Thermal fatigue behavior of cast superalloy Inconel 713LC
  16. Study of structural, morphological and optical properties of S and Cu co-doped SnO2 nanostructured thin films prepared by spray pyrolysis
  17. Synthesis and characterization of zirconium nitride coatings by cathodic arc sputtering technique
  18. Plasmon enhanced scattering and fluorescence in amorphous matrix
  19. Novel preparation of a porous composite insulating scaffold from forsterite and sodium carbonate media
  20. People
  21. Werner Mader, 65 years
  22. DGM News
  23. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 6.12.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111119/pdf
Button zum nach oben scrollen