Startseite The influence of AlCrN coating on the high-temperature corrosion resistance of Ti-46Al-7Nb alloy in an atmosphere containing 9%O2 + 0.2%HCl + 0.08%SO2 + N2
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

The influence of AlCrN coating on the high-temperature corrosion resistance of Ti-46Al-7Nb alloy in an atmosphere containing 9%O2 + 0.2%HCl + 0.08%SO2 + N2

  • Joanna Małecka
Veröffentlicht/Copyright: 16. Oktober 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 104 Heft 9

Abstract

The results of investigation of the isothermal oxidation wear mechanism of Ti-46Al-7Nb-0.7Cr-0.1Si-0.2Ni intermetallic alloy with AlCrN coating are presented. Tests in 9%O2 + 0.2%HCl + 0.08%SO2 + N2 atmosphere were performed at a temperature of 700°C. The structure of the specimen and chemical composition of the oxidation products were analysed using scanning electron microscopy and energy dispersive X-ray analysis. In addition, mass changes were investigated.

Keywords:: Intermetallics; Coatings; High temperature corrosion; Oxidation
* Correspondence address, Joanna Małecka PhD, Mikołajczyka 5 Street, 45-271 Opole, Poland, Tel.: +48774498466, Fax: +48774499927, E-mail:

References

[1] F.Appel, J.D.H.Paul, M.Oehring: Gamma Titanium Aluminide Alloys, Science and Technology, Wiley-VCH Verlag GmbH & Co. KGaA (2011). 10.1002/9783527636204Suche in Google Scholar

[2] E.ALoria: Intermetallics8 (2000) 1339–1345. 10.1016/S0966-9795(00)00073-XSuche in Google Scholar

[3] W.Szkliniarz: Metallic materials with the participation of intermetallic phases (in Polish); Z.Bojar and W.Przetakiewicz (Eds.), Technical Military Academy, Warsaw (2006) 66–88.Suche in Google Scholar

[4] F.Appel, M.Oehring, R.Wagner: Intermetallics8 (2000) 1283–1312. 10.1016/S0966-9795(00)00036-4Suche in Google Scholar

[5] S.Król, M.Prażmowski: Material Engineering3 (2006) 456–459 (in Polish).Suche in Google Scholar

[6] M.Yoshihara, Y.W.Kim: Intermetallics13 (2005) 952–958. 10.1016/j.intermet.2004.12.007Suche in Google Scholar

[7] J.Małecka: Corros. Sci.63 (2012) 287–292. 10.1016/j.corsci.2012.06.009Suche in Google Scholar

[8] J.Małecka: Journal of Achievements in Materials and Manufacturing Engineering, Vol. 50, 1 (2012) 40–46.Suche in Google Scholar

[9] J.Małecka, W.Grzesik: Journal of Achievements in Materials and Manufacturing Engineering, Vol. 43, 1 (2010) 252–259.Suche in Google Scholar

[10] S.Mrowec, T.Werber: Gaseous corrosion, Publishing house “Silesia”, Katowice, (1965) (in Polish). 10.1016/S0010-938X(65)80028-2Suche in Google Scholar

[11] J.Małecka, W.Grzesik, A.Hernas: Corros. Sci.52 (2010) 263–272. 10.1016/j.corsci.2009.09.015Suche in Google Scholar

Received: 2012-10-28
Accepted: 2013-3-6
Published Online: 2013-10-16
Published in Print: 2013-09-12

© 2013, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. The interrelated effect of activation energy and grain boundary energy on grain growth in nanocrystalline materials
  5. Microstructural evolution of as-rolled modified 9Cr-1Mo steel during friction stir welding
  6. Effect of milling duration on the evolution of shape memory properties in a powder processed Cu–Al–Ni–Ti alloy
  7. Experimental investigation of phase equilibria in the Co–Cr–W ternary system
  8. Phase equilibria of the Zn–Al–Ti system at 370°C in the Zn-rich region
  9. Enthalpies of mixing in liquid alloys of iron with the lanthanides
  10. Ab-initio studies of some rare-earth borides: CeB2, PrB2, NdB2, and PmB2
  11. Influence of different contents of Si and Cu on the solidification pathways of cast hypoeutectic Al-(5–9)Si-(1–4)Cu (wt.%) alloys
  12. Undercooling of Sn–Ag–Cu alloys: solder balls and solder joints solidification
  13. Nitrogen deficiency and metal dopant induced sub-stoichiometry in titanium nitride thin films: a comparative study
  14. The influence of AlCrN coating on the high-temperature corrosion resistance of Ti-46Al-7Nb alloy in an atmosphere containing 9%O2 + 0.2%HCl + 0.08%SO2 + N2
  15. PEMFC membrane electrode assembly degradation study based on its mechanical properties
  16. Effect of epoxy resin properties on the mechanical properties of carbon fiber/epoxy resin composites
  17. Microstructural aspects of ceramic hollow microspheres reinforced metal matrix composites
  18. Copper/bamboo fabric composite prepared via a silver catalytic electroless deposition process for electromagnetic shielding
  19. People
  20. Dr. Herbert Karl Schmid
  21. Ludwig Gauckler
  22. DGM News
  23. DGM News
https://doi.org/10.3139/146.110934
Schlagwörter für diesen Artikel
Intermetallics; Coatings; High temperature corrosion; Oxidation

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. The interrelated effect of activation energy and grain boundary energy on grain growth in nanocrystalline materials
  5. Microstructural evolution of as-rolled modified 9Cr-1Mo steel during friction stir welding
  6. Effect of milling duration on the evolution of shape memory properties in a powder processed Cu–Al–Ni–Ti alloy
  7. Experimental investigation of phase equilibria in the Co–Cr–W ternary system
  8. Phase equilibria of the Zn–Al–Ti system at 370°C in the Zn-rich region
  9. Enthalpies of mixing in liquid alloys of iron with the lanthanides
  10. Ab-initio studies of some rare-earth borides: CeB2, PrB2, NdB2, and PmB2
  11. Influence of different contents of Si and Cu on the solidification pathways of cast hypoeutectic Al-(5–9)Si-(1–4)Cu (wt.%) alloys
  12. Undercooling of Sn–Ag–Cu alloys: solder balls and solder joints solidification
  13. Nitrogen deficiency and metal dopant induced sub-stoichiometry in titanium nitride thin films: a comparative study
  14. The influence of AlCrN coating on the high-temperature corrosion resistance of Ti-46Al-7Nb alloy in an atmosphere containing 9%O2 + 0.2%HCl + 0.08%SO2 + N2
  15. PEMFC membrane electrode assembly degradation study based on its mechanical properties
  16. Effect of epoxy resin properties on the mechanical properties of carbon fiber/epoxy resin composites
  17. Microstructural aspects of ceramic hollow microspheres reinforced metal matrix composites
  18. Copper/bamboo fabric composite prepared via a silver catalytic electroless deposition process for electromagnetic shielding
  19. People
  20. Dr. Herbert Karl Schmid
  21. Ludwig Gauckler
  22. DGM News
  23. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 16.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110934/html?lang=de
Button zum nach oben scrollen