Startseite Mechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin films
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Mechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin films

  • Kristina Schlüter , Christiane Zamponi , Julia Hapke , Norbert Hort , Karl Ulrich Kainer und Eckhard Quandt
Veröffentlicht/Copyright: 30. März 2014
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 104 Heft 3

Abstract

Magnetron sputtered freestanding thin films of two modified WE43 alloys (Mg4Y3Nd and Mg4Y3Gd) consist of a supersaturated single phase microstructure with a strong texture in [0001] direction for a wide range of deposition conditions. While the deposition conditions have no significant influence on the corrosion behaviour of these samples, they strongly influence the mechanical properties, which can be tuned between extremely brittle behaviour for high sputtering pressures (2.0 × 10−2 mbar) and ductile behaviour with a maximum strain of about 18 % at room temperature for low sputtering pressures (8.0 × 10−4 mbar) for both investigated alloys.

Keywords: Magnesium alloys; Thin films; Mechanical behaviour
* Correspondence address, Prof. Dr.-Ing. Eckhard Quandt, Kaiserstraße 2, 24143 Kiel, Germany. Tel.: +49 (0)431 880 6200, Fax: +49 (0)431 880 6203, E-mail:

References

[1] K.U.Kainer, F.von Buch, in: K.U.Kainer (Ed.), Magnesium Alloys and Technology, Wiley-VCH, Weinheim (2003) 3. 10.1002/3527602046Suche in Google Scholar

[2] M.T.Pérez-Prado, J.A.del Valle, O.A.Ruano: Mater. Lett.59 (2005) 3299–3303. 10.1016/j.matlet.2005.04.061Suche in Google Scholar

[3] W.J.Kim, J.B.Lee, W.Y.Kim, H.T.Jeong, H.G.Jeong: Scripta Mater.56 (2007) 309–312. 10.1016/j.scriptamat.2006.09.034Suche in Google Scholar

[4] L.Jin, D.Lin, D.Mao, X.Zeng, W.Ding: Mater. Lett.59 (2005) 2267–2270. 10.1016/j.matlet.2004.09.061Suche in Google Scholar

[5] A.Yamashita, Z.Horita, T.G.Langdon: Mat. Sci. Eng. A-Struct.300 (2001) 142–147. 10.1016/S0921-5093(00)01660-9Suche in Google Scholar

[6] K.Schlüter, C.Zamponi, A.Piorra, E.Quandt: Coros. Sci.52 (2010) 3973–3977. 10.1016/j.corsci.2010.08.011Suche in Google Scholar

[7] Y.Bohne, D.M.Seeger, C.Blawert, W.Dietzel, S.Mändl, B.Rauschenbach: Surf. Coat. Tech.200 (2006) 6527–6532. 10.1016/j.surfcoat.2005.11.088Suche in Google Scholar

[8] C.Blawert, D.Manova, M.Störmer, J.W.Gerlach, W.Dietzel, S.Mändl: Surf. Coat. Tech.202 (2008) 2236–2240. 10.1016/j.surfcoat.2007.08.008Suche in Google Scholar

[9] M.M.Avedsian, H.Baker (Eds.), ASM Speciality Handbook Magnesium and Magnesium Alloys, ASM International, Materials Park, OH (1999).Suche in Google Scholar

[10] T.B.Massalski, H.Okamoto, P.R.Subramanian, L.Kacprzak (Eds.), Binary Alloy Phase Diagrams, ASM International, OH, USA (1990).Suche in Google Scholar

[11] F.R.Elsayed, N.Hort, M.A.Salgado-Ordorica, K.U.Kainer: Mat. Sci. Forum690 (2011) 65–68. 10.4028/www.scientific.net/MSF.690.65Suche in Google Scholar

[12] K.Schlüter, J.Reverey, N.Hort, C.Zamponi, E.Quandt: Mat. Sci. Forum690 (2011) 286–289. 10.4028/www.scientific.net/MSF.690.286Suche in Google Scholar

[13] D.J.Fray: Science289 (2000) 2295–2296. 10.1126/science.289.5488.2295Suche in Google Scholar

[14] MagnesiumElektron (Eds.), Elektron ® 43, Preliminary Datasheet, Date: 24th of April 2012.Suche in Google Scholar

[15] J.A.Thornton: Ann. Rev. Mater. Sci.7 (1977) 239–260. 10.1146/annurev.ms.07.080177.001323Suche in Google Scholar

[16] A.Beck: The Technology of Magnesium and its Alloys, F.A. Hughes & Co Ltd, London (1940).Suche in Google Scholar

[17] A.Staroselsky, L.Anand: Int. J. Plasticity19 (2003) 1843–1864. 10.1016/S0749-6419(03)00039-1Suche in Google Scholar

Received: 2012-5-24
Accepted: 2012-8-13
Published Online: 2014-03-30
Published in Print: 2013-03-14

© 2013, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. The thermodynamics of boron extraction from liquid silicon using SiO2–CaO–MgO slag treatment
  5. Viscosity estimation of semi-solid alloys based on thermal simulation compression tests
  6. Original Contributions
  7. Experimental study of phase equilibria in the “SnO”–CaO–SiO2 system in equilibrium with tin metal
  8. Prediction of the solidification path of Al-4.37Cu-27.02Mg ternary eutectic alloy with a unified microsegregation model coupled with Thermo-Calc
  9. Evaluation of the effective diffusion coefficient of boron in the Fe2B phase in the presence of chemical stresses
  10. Morphology evolution of γ′ precipitates in GTD-111 Ni-based superalloy with heat treatment parameters
  11. Hot forming of a new steel used in stamping dies and tooling
  12. Mechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin films
  13. Sliding wear performance of Fe-, Ni- and Co-based hardfacing alloys for PTA cladding
  14. The suitability of selected austenitic stainless steels and hastelloy C276 alloys as substrates for thin film deposition using spray pyrolysis
  15. Synthesis, structural, optical and thermal analysis of nanostructured ZnO
  16. Electrical conductivity variation of (Bi2Te3)0.25(Sb2Te3)0.75 crystal grown using the zone melting method
  17. X-ray Absorption Near Edge Structure Studies of Pb1-xMnxTe(In, Ga) Systems
  18. DGM News
  19. DGM News
  20. Grain refining of aluminium alloys and silicon by means of boron-nitride particles
https://doi.org/10.3139/146.110860
Schlagwörter für diesen Artikel
Magnesium alloys; Thin films; Mechanical behaviour

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. The thermodynamics of boron extraction from liquid silicon using SiO2–CaO–MgO slag treatment
  5. Viscosity estimation of semi-solid alloys based on thermal simulation compression tests
  6. Original Contributions
  7. Experimental study of phase equilibria in the “SnO”–CaO–SiO2 system in equilibrium with tin metal
  8. Prediction of the solidification path of Al-4.37Cu-27.02Mg ternary eutectic alloy with a unified microsegregation model coupled with Thermo-Calc
  9. Evaluation of the effective diffusion coefficient of boron in the Fe2B phase in the presence of chemical stresses
  10. Morphology evolution of γ′ precipitates in GTD-111 Ni-based superalloy with heat treatment parameters
  11. Hot forming of a new steel used in stamping dies and tooling
  12. Mechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin films
  13. Sliding wear performance of Fe-, Ni- and Co-based hardfacing alloys for PTA cladding
  14. The suitability of selected austenitic stainless steels and hastelloy C276 alloys as substrates for thin film deposition using spray pyrolysis
  15. Synthesis, structural, optical and thermal analysis of nanostructured ZnO
  16. Electrical conductivity variation of (Bi2Te3)0.25(Sb2Te3)0.75 crystal grown using the zone melting method
  17. X-ray Absorption Near Edge Structure Studies of Pb1-xMnxTe(In, Ga) Systems
  18. DGM News
  19. DGM News
  20. Grain refining of aluminium alloys and silicon by means of boron-nitride particles
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 13.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110860/html?lang=de
Button zum nach oben scrollen